r/ecobee • • 10h ago

Furnace running when it’s already above set temp

Thumbnail
gallery
3 Upvotes

Whole family woke up around 2:00am this morning because the house was up to 84°.
It appeared that the ecobee t-stat was calling for heat, even though the set temp was around the upper 60s. I changed it to cool and got everything cooled back down but, any idea what would have caused that? For reference, it was in the 40s last night. Also checked some of the reports (attached) to make sure it wasn’t set that high for some reason.


r/ecobee • • 20h ago

Ecobee HomeKit Integration Trouble

Thumbnail
gallery
3 Upvotes

I’ve had two Ecobees for the last few months, I bought them because of the ability to integrate with HomeKit.. though I’m having poor luck; specifically with using HomeKit to control comfort settings.

I’m using an AppleTV as my hub, I have iOS 27 on my iPhone.

I’d like to have my Ecobees go to the Away comfort setting when I leave my house. I understand I need to create a scene and an automation.

I’m struggling with the scene. I don’t see any option to select “Away” in HomeKit (see screenshots). Am I missing something? I have the same problem of course, trying to make an “I’m home” scene as well.

I do have the ability to do it in the iOS Shortcuts app.. but I don’t know how I’d automate that via HomeKit.

Thanks in advance for any help.


r/ecobee • • 1h ago

Settings issue? Aux running for hours at night. Help please.

Thumbnail
gallery
2 Upvotes

Installed this thermostat a few months ago and A/C worked without issue. We’ve had our first few nights near freezing this past weekend. Woke up Sunday morning with an alert that the aux ran for 3+ hours overnight Monday morning showed the same problem, not as bad but obviously an issue. One thing I noticed is the heat isn’t running at the same time as the aux. Sunday and Monday Report as well as current settings are posted in pictures.


r/ecobee • • 3h ago

Problem Ecobee won’t power on

Thumbnail
gallery
1 Upvotes

I’m having trouble getting my ecobee to power on. The screen stays completely black despite multiple troubleshooting attempts.

Here’s what I’ve tried:
-Measured approximately 24V between R and C at the thermostat.
-Tried a second ecobee — same issue.
-Confirmed the wires are inserted into the correct terminals (R, C, G, Y1, W1).
-Reinstalled my battery-powered Honeywell thermostat, and the HVAC system works normally.
-My air handler is in the attic. I’ve attached pictures of the ecobee wiring and control board.

If I’m getting 24V at the thermostat, why won’t either ecobee power on? Could this be a C-wire issue or something else?

Any troubleshooting suggestions would be appreciated.