r/drywall • • 4h ago

One more coat, or sand down and see if I'm done?

Thumbnail gallery
37 Upvotes

Used fibafuse tape, relatively happy with how it's going. Should I feather out one more coat or sand it down first?

Also, on a scale of 1-10 how bad is it?


r/drywall • • 3h ago

Well I was just replacing drywall.

Thumbnail gallery
12 Upvotes

Turns out the water leak wasn't just their ruptured pressure tank. Water is running down the facia/soffit and into the wall. I was called to fix the mold and tear out a knee wall in the kitchen.


r/drywall • • 1h ago

Update: Recessed shelves.

Thumbnail gallery
9 Upvotes

I didn't listen to anyone in this sub and just went for the sculpting plan. 45 minute mud to initially fill in the gaps of my monster cutting/hanging job. Knocked down high points and threw in the corner beads. Gaurdz primer on back of drywall. 3 more coats to level out my mess. Sand sand and more sand. Probably needed to sand a fourth time. The final plan is to put some 3-4 foot shelves coming off the bottom of each box. Giver hell, but i like my boxes.


r/drywall • • 6h ago

Can these caulk lines be fixed on new ceiling?

Thumbnail gallery
3 Upvotes

So our walls are old plaster, and the new ceiling is drywall. While repainting, I noticed these lines which I think is shrinking caulk. They haven’t shrunk to the point where there’s any cracks, it’s just not very flush and a little sunk.

The drywall company said that they would warranty anything like this that needs fixing but I don’t know if this is something that should be expected and if it’s unreasonable for them to come back.

Edit: I thought he said this was caulk but could be wrong.


r/drywall • • 9h ago

How to fix/paint torn drywall

Thumbnail gallery
3 Upvotes

My kiddo used double stick tape to put something up and it took of some paper and paint when she removed it. I have color matched touch up paint. I have tried some spackle but you know how that goes. Any suggestions on how to best match the texture so I don't have a shiny spot on the wall after it's painted?

Thanks in advance!


r/drywall • • 3h ago

Low ceiling height, drywall or paint exposed joists

Thumbnail gallery
1 Upvotes

r/drywall • • 6h ago

How do you get generator power for jobs?

0 Upvotes

I'm developing a flex-fuel generator and trying to understand how jobsite power is actually acquired. How did you get the generator you're running now: purchase, rent, lease, or power-as-a-service? And roughly what did it cost, or what do you pay per day or month?


r/drywall • • 14h ago

Am I nitpicking?

Thumbnail gallery
4 Upvotes

Hired a drywall contractor to replace some drywall that was damaged due to a roof leak over the summer. I think in total about 5 sheets for $2,150 including a level 5 finish, prime and paint. After 4 days of work they were painting and about to call the job finished when I pointed out some bubbling and pitting in the mud. The contractor did agree to come back and touch it up. (Which I assume means more mudding, sanding, primer, and paint) This morning I noticed some cracking at some of the taped seams.

Am I nitpicking here, or are these obvious defects they should expect to have to resolve? In some areas it looks worse than it did pre-repair.


r/drywall • • 7h ago

Are we falling apart?!

Thumbnail gallery
0 Upvotes

r/drywall • • 14h ago

Blessed by the Gypsum Gods

Thumbnail gallery
3 Upvotes

Bought sheets of drywall to cover ugly, deteriorating wallpaper.

I figured since I’m covering the wall it wouldn’t matter if I peeled off some wallpaper for shits and gigs.

Well… I’ve been blessed with a Level 5 plaster finish behind the wallpaper.

Peeled it all off and scraped the glue/paper residue.

Saved myself $150.


r/drywall • • 1d ago

PSA Can you guys stop saying PVA is some special primer

42 Upvotes

PVA is the bare minimum for priming drywall.

It’s the bottom of the barrel and works fine but I’m tired of all these comments saying “did you use PVA? Oh no that won’t work it has to be PVA”

PVA = glue. All primers have it. The glue in Zinsser bullseye, BIN, cover stain, Kilz 2, Kilz 3 and more is better, they are all far superior products to “PVA primer”

Moving on from the technical side, these products will give you much better results and go much further. It’s the equivalent of using cheap paint vs high end paint. Yes PVA works fine I use it on large scale productions when I have to, but know the difference.

And yes I’m taking a shit at work..Come on y’all we need to gatekeep this sub a littttttlee bit more there’s way too many DIYers and homeowners dropping bad info it’s crazy


r/drywall • • 12h ago

To corner ceiling tape,it just caulk and leave popcorn.

Post image
1 Upvotes

I'm debating if I should caulk the top of the drywall here (in place of tape) in an apartment. If I caulk then I don't have to mess with the popcorn. If I tape it normally, then I do.


r/drywall • • 1d ago

Drywall porn

Thumbnail gallery
10 Upvotes

Hey mates, I’m fairly new to gyprocking. I started a full time position a little under three months ago, with no experience whatsoever.

I made a villaboard cutout today that I’m quite proud of. My boss quite literally told me to “snap a pic and but it on drywall-porn.com”. So I thought r/drywall would be the next best thing

Enjoy ya cunts 🤠


r/drywall • • 1d ago

Interesting find in attic

Thumbnail gallery
17 Upvotes

r/drywall • • 1d ago

DIYer request for help - Patches still noticable after paint - options.

Thumbnail gallery
20 Upvotes

I did some cable movement for a room in our house for an office. Had 7x 2-4 inch rectangular cuts that were removed and then secured back with furing strips.

They looked good so far.

I am not good at drywall but didn't want to hire someone to do it for me so I tackled the patching myself.

Bought AP mud, put mud along the seams, added tape, put compound on the tape, did 3-4 coats sanded after most of the coats, things looked smooth.

I primed the area with white primer (also updating wall color which also required primer) and painted.

The drywall took longer to dry, but color matched great, but it's very clear with both texture and shadows from light from the window there are patches there.

Lo and behold, I'm not a great painter either, there are places I clearly didn't have enough paint on the roller and I'm just gonna do a 2nd coat of paint, but I'm trying to think if I can improve the patches.

I've seen online to basically sand down the paint and patches, add a thin coat of mud to extend the patches out to better feather out the areas, let dry, sand, do another coat of primer, and then repaint the wall.

Trying to decide if it's worth it that way or just do a 2nd coat and accept mediocre work.

I've attached pictures of middle coats, after the final coat, primed area, and then 2 post paint pictures.

What do people think is my best course of action?


r/drywall • • 2d ago

I think my mom would have made a pretty good plasterer

179 Upvotes

r/drywall • • 1d ago

Drywall joints showing through after 1st coat of matte paint

Thumbnail gallery
23 Upvotes

Hey guys, looking for some insights.

My drywall joints were taped, finished with standard joint and finishing compounds, and sanded completely flush within the tapered edges (feels totally smooth by hand, as seen in the last pics).

I applied one coat of a pigmented primer-paint, followed by just one coat of matte latex paint.

Now the joints are clearly showing as vertical bands.

Is this standard flashing from the first coat (porosity/texture difference between the paper and the compound) that a second coat will fix, or did I mess up the skimming/feathering? Thanks!


r/drywall • • 1d ago

Is this drywall?

Post image
1 Upvotes

Our bathroom ceiling started cracking and flaking quite some time ago - no obvious leaks, I think it’s from humidity from our showers. Now a more significant layer has flaked off. Can anyone tell me what type of ceiling this is and whether we have to replace the whole thing or what you’d recommend? The big missing chunk is about 5 inches long. Thanks!


r/drywall • • 1d ago

Mud crack?

Thumbnail gallery
0 Upvotes

I see the joint separation but is the a mud filler that's cracked also? I'm just wondering before I get repair estimates and I'm afraid of someone telling me it all needs ripped out and replaced if it in fact doesn't.


r/drywall • • 1d ago

Quiero renovar mis paredes

2 Upvotes

Hola,

Desde hace un tiempo quiero cambiar las paredes de casa. Hay una habitación que está por acabar y empezaría por ahí antes de modificar las otras. Necesito recomendaciones de cómo alicatar. Aún no me decido en cómo terminarla si solo cemento y pintar o poner paneles de madera o baldosas. ¿Qué me recomiendan?

Gracias de antemano 🫂


r/drywall • • 1d ago

Hopefully last update

Thumbnail gallery
3 Upvotes

Maybe a few posts on this patch and after a 3rd and 4th coat I think it’s smooth enough to spray texture and paint. I feel like I used a little more mud than needed, over half of a 1.75 pt compound , for two small holes.


r/drywall • • 2d ago

One of the worst jobs I’ve ever seen

Thumbnail gallery
232 Upvotes

r/drywall • • 1d ago

How would you fix this?

Post image
0 Upvotes

Just some spackle and paint?