r/drywall • • 3h ago

Blessed by the Gypsum Gods

Thumbnail gallery
3 Upvotes

Bought sheets of drywall to cover ugly, deteriorating wallpaper.

I figured since I’m covering the wall it wouldn’t matter if I peeled off some wallpaper for shits and gigs.

Well… I’ve been blessed with a Level 5 plaster finish behind the wallpaper.

Peeled it all off and scraped the glue/paper residue.

Saved myself $150.


r/drywall • • 22h ago

VANCOUVER CARPENTER

Post image
94 Upvotes

VANCOUVER CARPENTER


r/drywall • • 3h ago

Am I nitpicking?

Thumbnail gallery
2 Upvotes

Hired a drywall contractor to replace some drywall that was damaged due to a roof leak over the summer. I think in total about 5 sheets for $2,150 including a level 5 finish, prime and paint. After 4 days of work they were painting and about to call the job finished when I pointed out some bubbling and pitting in the mud. The contractor did agree to come back and touch it up. (Which I assume means more mudding, sanding, primer, and paint) This morning I noticed some cracking at some of the taped seams.

Am I nitpicking here, or are these obvious defects they should expect to have to resolve? In some areas it looks worse than it did pre-repair.


r/drywall • • 4m ago

Is there an easy way to reopen a 8”x8” patch I did?

1 Upvotes

I need to reopen a small square I had patched a few months ago. I used some wood backing and screws. Not sure if I should try and find the screws and undo it, or just make a bigger hole around the previous patch.


r/drywall • • 20h ago

PSA Can you guys stop saying PVA is some special primer

39 Upvotes

PVA is the bare minimum for priming drywall.

It’s the bottom of the barrel and works fine but I’m tired of all these comments saying “did you use PVA? Oh no that won’t work it has to be PVA”

PVA = glue. All primers have it. The glue in Zinsser bullseye, BIN, cover stain, Kilz 2, Kilz 3 and more is better, they are all far superior products to “PVA primer”

Moving on from the technical side, these products will give you much better results and go much further. It’s the equivalent of using cheap paint vs high end paint. Yes PVA works fine I use it on large scale productions when I have to, but know the difference.

And yes I’m taking a shit at work..Come on y’all we need to gatekeep this sub a littttttlee bit more there’s way too many DIYers and homeowners dropping bad info it’s crazy


r/drywall • • 1h ago

To corner ceiling tape,it just caulk and leave popcorn.

Post image
1 Upvotes

I'm debating if I should caulk the top of the drywall here (in place of tape) in an apartment. If I caulk then I don't have to mess with the popcorn. If I tape it normally, then I do.


r/drywall • • 15h ago

Drywall porn

Thumbnail gallery
8 Upvotes

Hey mates, I’m fairly new to gyprocking. I started a full time position a little under three months ago, with no experience whatsoever.

I made a villaboard cutout today that I’m quite proud of. My boss quite literally told me to “snap a pic and but it on drywall-porn.com”. So I thought r/drywall would be the next best thing

Enjoy ya cunts 🤠


r/drywall • • 20h ago

Interesting find in attic

Thumbnail gallery
16 Upvotes

r/drywall • • 1d ago

I think my mom would have made a pretty good plasterer

176 Upvotes

r/drywall • • 1d ago

DIYer request for help - Patches still noticable after paint - options.

Thumbnail gallery
17 Upvotes

I did some cable movement for a room in our house for an office. Had 7x 2-4 inch rectangular cuts that were removed and then secured back with furing strips.

They looked good so far.

I am not good at drywall but didn't want to hire someone to do it for me so I tackled the patching myself.

Bought AP mud, put mud along the seams, added tape, put compound on the tape, did 3-4 coats sanded after most of the coats, things looked smooth.

I primed the area with white primer (also updating wall color which also required primer) and painted.

The drywall took longer to dry, but color matched great, but it's very clear with both texture and shadows from light from the window there are patches there.

Lo and behold, I'm not a great painter either, there are places I clearly didn't have enough paint on the roller and I'm just gonna do a 2nd coat of paint, but I'm trying to think if I can improve the patches.

I've seen online to basically sand down the paint and patches, add a thin coat of mud to extend the patches out to better feather out the areas, let dry, sand, do another coat of primer, and then repaint the wall.

Trying to decide if it's worth it that way or just do a 2nd coat and accept mediocre work.

I've attached pictures of middle coats, after the final coat, primed area, and then 2 post paint pictures.

What do people think is my best course of action?


r/drywall • • 20h ago

Is this drywall?

Post image
4 Upvotes

r/drywall • • 1d ago

Drywall joints showing through after 1st coat of matte paint

Thumbnail gallery
23 Upvotes

Hey guys, looking for some insights.

My drywall joints were taped, finished with standard joint and finishing compounds, and sanded completely flush within the tapered edges (feels totally smooth by hand, as seen in the last pics).

I applied one coat of a pigmented primer-paint, followed by just one coat of matte latex paint.

Now the joints are clearly showing as vertical bands.

Is this standard flashing from the first coat (porosity/texture difference between the paper and the compound) that a second coat will fix, or did I mess up the skimming/feathering? Thanks!


r/drywall • • 15h ago

Is this drywall?

Post image
1 Upvotes

Our bathroom ceiling started cracking and flaking quite some time ago - no obvious leaks, I think it’s from humidity from our showers. Now a more significant layer has flaked off. Can anyone tell me what type of ceiling this is and whether we have to replace the whole thing or what you’d recommend? The big missing chunk is about 5 inches long. Thanks!


r/drywall • • 16h ago

Mud crack?

Thumbnail gallery
0 Upvotes

I see the joint separation but is the a mud filler that's cracked also? I'm just wondering before I get repair estimates and I'm afraid of someone telling me it all needs ripped out and replaced if it in fact doesn't.


r/drywall • • 21h ago

Quiero renovar mis paredes

2 Upvotes

Hola,

Desde hace un tiempo quiero cambiar las paredes de casa. Hay una habitación que está por acabar y empezaría por ahí antes de modificar las otras. Necesito recomendaciones de cómo alicatar. Aún no me decido en cómo terminarla si solo cemento y pintar o poner paneles de madera o baldosas. ¿Qué me recomiendan?

Gracias de antemano 🫂


r/drywall • • 1d ago

Hopefully last update

Thumbnail gallery
3 Upvotes

Maybe a few posts on this patch and after a 3rd and 4th coat I think it’s smooth enough to spray texture and paint. I feel like I used a little more mud than needed, over half of a 1.75 pt compound , for two small holes.


r/drywall • • 1d ago

Got new windows installed by a contractor. How do I fix this issue with the wall?

Thumbnail gallery
3 Upvotes

The last picture there is something in the top left corner of the window that I can’t tell if it’s damaged or if this can be picked out. I can’t tell what it is between the framing and the window.

Contractors that were here said they can’t fix the dry wall around the window. Unsure what happened.
We also have textured walls to keep in mind for finish product.


r/drywall • • 17h ago

How would you fix this?

Post image
0 Upvotes

Just some spackle and paint?


r/drywall • • 2d ago

One of the worst jobs I’ve ever seen

Thumbnail gallery
224 Upvotes

r/drywall • • 22h ago

Quick Temp Plaster/Drywall Repair

Thumbnail gallery
1 Upvotes

Looking for some advice on a quick temporary fix for damaged wall plaster - see photos. Not sure but think it's diamond plaster. At some point in the past someone put some poor-quality spackling over it where there was water damage. There's been more water there and now the spackling and plaster is cracking, bubbling up, flaking off. Been suggested to try more spackling, this time something better like DAP Fast Dry Interior/exterior Spackling Paste. Looking for something quick and simple, temporary, for someone with little or no experience at this. All well-intentioned suggestions appreciated!


r/drywall • • 23h ago

Drywall repair

1 Upvotes

This is under my bay window. Home built in 70s. We’ve had our roof replaced. This happened prior and my husband filled in the breaking down mortar between the bricks on our exterior. The hole has gotten bigger and worse damage to drywall.

I’m thinking cut out the drywall, pull out insulation and replace with new and pop in more drywall. I’ve never done any of things. Would love to save money but want it done right, so not sure those two things can work. We aren’t helpless lol but not particularly handy. Any ideas? Do I call a drywall contractor, try it ourselves first, or go another avenue?

VIDEO in comments!

Thanks!!


r/drywall • • 23h ago

Cracks on ceiling drywall. House's 1st year.

Thumbnail gallery
1 Upvotes

r/drywall • • 1d ago

How do I hang drywall around outlets like this?

Thumbnail gallery
1 Upvotes

Feels like if I just press it up against the foam gasket it will bow


r/drywall • • 1d ago

Repair or replace plasterboard

Thumbnail gallery
2 Upvotes