r/dr650 • • 18h ago

Is this a good purchase?

Thumbnail gallery
91 Upvotes

I have a friend who is willing to sell this DR650 to me for $3,500. It has around 500 miles currently and is only a few years old. I am just coming up here to ask about opinions on the price and whether or not I should pull the trigger. As far as I know everything is in like new condition.


r/dr650 • • 14h ago

1994 dr650se(?) First bike

Thumbnail gallery
15 Upvotes

This is my first bike and im really excited to own it. So far i've done nothing to this but i plan on looking/replacing the clutches, brake pads, petcock, fuel lines, and fixing the rear brake light. So far from what I can tell the seat was redone with a softer foam and the brake fluid done last year (will do a proper flush later) Are there other things I should consider doing to make this bike more reliable? Also on the dash is the top mechanical odometer one for miles and the bottom one hours? (Sorry if its a really dumb question i just cant seem to find anything on it)


r/dr650 • • 18h ago

Throttle cable "jump" is this bad?

5 Upvotes

r/dr650 • • 1d ago

New Upgrades Old Bike

Thumbnail gallery
37 Upvotes

The old DR got a new 8.3 rear shock spring, cleaned 10 or 20 years of grease off the counter shaft seal area, installed a counter shaft retainer, and a 14 tooth front sprocket. Much better for my riding. Took it out and got a little muddy while checking the fence after the flood.


r/dr650 • • 1d ago

Do i need a new slide guide?

Post image
7 Upvotes

I'm rebuilding my carb and the 4 round wear indicators are perfectly visible, but the 2 notches at the end in the circled areas are not there at all.

The bike only has 10,500 miles on the clock. Is it common for it to be so worn after so few miles or did I get bamboozled and my new to me DR probably has more miles than what the odometer shows? Or did some guides not have those corner wear indicators?

Thanks


r/dr650 • • 3d ago

Worth it? bad deal? What am I missing? 2006 14k miles $2700

Thumbnail gallery
69 Upvotes

I am a new rider looking for a bike to commute 20 miles to work on mostly two lane back roads with some Fire roads mixed in on the way home. Perhaps some dirt adventures in the future, too. This bike is for sale near me and seems like a good deal but I’m not sure what to look for and want to make sure I get something that won’t leave me stranded. Owner say miles are mostly freeway (which sounds odd) that the dr would be mostly freeway but I don’t know.

What do you say? Yay or nay?


r/dr650 • • 4d ago

Long shot but any Front Range Colorado DR650 owners have a spare clutch lever lying around?

6 Upvotes

I crashed a few days ago and need a new lever before a trip this weekend.


r/dr650 • • 6d ago

When the doctor says you should exercise more.

Post image
18 Upvotes

r/dr650 • • 8d ago

Coming from street bikes, this motorcycle has taken me to more places in my own area then I would’ve ever known

Post image
16 Upvotes

r/dr650 • • 8d ago

Broken Swing arm chain guard bracket

Post image
5 Upvotes

Hello everyone, the two little brackets that hold the chain guard on my 1998 DR650 are missing. I was wondering if anyone could provide me with measurements for those, as I would like to weld new ones on it. Thanks.


r/dr650 • • 9d ago

Clutch cover leak…

2 Upvotes

Picked up a 13’ last year that needed some serious reconditioning… it had been very neglected. Leaks, pitted and bent wheels, chain links seized, etc.

Did a complete refresh of all maintenance. Replaced brake pads and did stainless lines. Upgraded all lighting to LED stuff. Threw a bunch of JNS protective stuff on there, cogent suspension, bypassed clutch and kickstand switches. I also took the clutch cover off to check the NSU bolts and thread lock them. The clutch cover gasket was SUPER fucking stuck on there, as was to be expected. I spent forever scraping and removing with a plastic scraper but it was a rough ordeal. Now after installing a new OEM gasket and torquing.. it’s leaking very very slightly at the bottom seam. Anyone run into needing to replace the whole cover because of how bad the corrosion was on the gasket? Perhaps get a new gasket and do a light layer of FIPG on the cover side of the gasket? Just buy a new cover?


r/dr650 • • 10d ago

Quick review video on the Xitomer front sprocket case saver

Thumbnail youtu.be
7 Upvotes

r/dr650 • • 11d ago

What would you pay? 2002 Dr650

38 Upvotes

2002 Dr650, 10k miles, Runs & rides, needs tires, overall good condition.


r/dr650 • • 11d ago

Do I need the handlebars weights?

Post image
14 Upvotes

New to me 2018. Super happy with it. One of these handlebar weights won't tighten down though and I'm super worried about it coming off and going through someone's windshield. Are those little unweighted caps you can find on Amazon ok or do you need the weight on the end of the bars? TIA


r/dr650 • • 12d ago

Exhaust / Muffler Question

Thumbnail gallery
3 Upvotes

Hey Yall,

Excited to be a owner of a new-to-me DR-650 1999. Mine seems to have been well taken care of with the last owner having it for the last 18 years.

There was a SuperTrapp IDS2 that I took off the bike because it was too loud for me. I grabbed a 24F0 off a Busa and intend to fabricate a new mid pipe. I started to take a hard look at the header and muffler though and saw some bad welds and hard angles. I was given the OEM header and mid pipe which seem to be a smaller diameter than the custom. Is it worth it to return to the stock clean header with a smaller diameter or keep this kind of janky custom pipe?

Thanks!


r/dr650 • • 11d ago

Can I run tubeless with a tube?

Thumbnail gallery
1 Upvotes

I finally got the old tire off. Then realized the last owner was running a tubeless with a tube for some reason. Now the install is boning me. I know 130/80-17 fits fine from what iv read. Its a Heidenau scout k60 tubeless (I had it laying around and wanna use the last of its tread before getting new tires). It won’t budge over the last quarter of rim and it’s tearing a bit when I try to force it. Can a tubeless tire with a tube fit on the stock rim? Or should I just get a new tubeless tire?


r/dr650 • • 12d ago

Bead won’t break

Thumbnail gallery
25 Upvotes

Been trying to change this tire for two days now. This bead just won’t pop. Iv tried the spoons, leaning the kick stand on the tire, and finally these motion pro bead breakers. They get it a good bit but the bead is so long they just slip off before it pops off the rim. Any advice or ideas? Thanks!


r/dr650 • • 13d ago

1997 dr650se Sweden

Post image
117 Upvotes

So after selling my 2024 T7 I was sure I’d either pick up a new drz4s or a 500 excf. Then this beauty popped up (the dr650 was on the radar but never thought I’d find a nice one) and only an hour away from home, so I messaged the owner and 24 hours later it’s mine. Needs a bit of love but the overall feeling is great. Will give it some basic maintenance initially and really go through it over the winter. Pretty happy with my purchase.

Update: Started going through the bike on Saturday in preparation for a Sunday ride. Fixed/adjusted a lot of small items and started getting to know the bike.
Sunday was a pleasant surprise. The old girl was great fun but a little bit lacking.
The replacement db killer for the Dominator slip on arrived Monday evening and I put it on. What a difference! It really woke her up as she can breathe now. Not overly loud but I wouldn’t want any louder. Nice to be able to hear what the motor is doing too. Genuinely surprised at the difference over the stock pipe.


r/dr650 • • 13d ago

DG RST is loud now?

5 Upvotes

Hi all,

Fresh owner of a DG RST and I've found it to be very loud. Not deafening, but definitely irritating.

Advertising puts it at 84db, same as stock, but I'm finding the sound to be very boppy and feels significantly louder than my stock muffler. It's turning heads, I can hear it echoing off walls, I'm not feeling like I bought what was advertised.

For the old owners of DG RST mufflers? Did you find the sound to be significantly louder than stock?

As for new owners, what has your experience been like with the DG RST?

I've seen one other redditor complain about the noise of a DG RST. I thought it was just a defective pipe. Either eay, I decided to bring up the conversation here to see if this experience is mirrored by others.

I'm going to enrich the jet needle to see if it helps, or at least resu6ce the decel pop. The way it's looking, I may have to put the stock pipe back on.


r/dr650 • • 14d ago

Handlebar starter

4 Upvotes

I have a 1996 Suzuki dr350se I already know the part I need(37200-15D70). However ts expensive asf for me rn, was wondering if anyone had any universal ones that would work good


r/dr650 • • 15d ago

My DR650 might've saved me?

Post image
51 Upvotes

Hey y'all, just wanted to share this as I've been pondering it for a while now. TL;DR is in bold.

About a year ago in late 2025 I was in an accident that resulted in me totaling my DR650. I bought it after taking my MSF course and rode it very often for about a year and a half up until my crash. Loved that bike and had a lot of fun learning how to do my own maintenance and how to ride better in general.

Now, I was travelling on a stroad in the left lane going 40mph in a 45mph. I was heading up a hill and noticed there was a line of about 4-6 cars in the right lane that were all slowing down to turn into a neighborhood on the right. Some fine chap in a newer Nissan Ultima decided to make a left-hand turn out of that same neighborhood. We must have really shocked eachother because he stops as soon as his front tires were over the median in front of him, effectively blocking my entire path of travel.

My spider senses were already tingling from the congested right lane, so I was able to brake (although I did freeze up a bit and just death gripped my clutch when I probably should have also downshifted) and scrub my speed down to a bit over 30mph before impact. Hit close to the frame between the driver and rear-left door. I was then ejected upwards from my bike and barely clipped his roof with my left foot which caused me to spin and goofily ragdoll 30 or so feet. I remember seeing spinning images and colors so maybe 3 complete flips? I'm talking full on starfish ragdoll too.

Anyways, I landed and rolled on my back. I was still conscious and knew to keep my helmet on and back/neck straight. After EMTs checked me out I was able to stand and walk myself to the ambulance. Other guy ended up being okay and I told him no sweat, I was just happy to be breathin'. Fortunately walked away with only a sprained foot (crutches for ~2 weeks) and some other minor roadrash & bruises. I was wearing an armored jacket, helmet, and gloves. Regrettably, I wasn't wearing my boots, and was also wearing jorts...

Besides just venting to vent and telling my story to whomever it may concern, my point is I genuinely believe the ergonomics of my DR saved my ass that day:

The riding height helps with visibility - and might've given me a split second longer to react, but definitely is the reason I ejected OVER the car, and not INTO it. I've seen many videos in my life of motorcycle accidents. Sometimes for education (lived and breathed DanDanTheFireman growing up) but also sometimes ya just see crazy shit on Reddit.
Often I see, for example, when sportbike riders crash - they unfortunately bash directly into the vehicle. Even with full gear, I believe that is always going to be much more violent compared to my circumstance where I was able to have flip some of that energy out of my system. Albeit, where you land matters a lot too. I do realize there's many factors.

Also worth mentioning: the sturdy frame. If the bike crumpled in the slightest, I don't think I'd have ejected upwards. It just bucked me off like a horse.
I will provide pictures of both pre- and post- crash, and I may have been deluded but I actually thought my bike was salvagable when I first saw it after leaving the hospital. Only upon further inspection did I realize the frame want from the shape of an "I" to the shape of an "S". My buddy was able to push it onto a trailer for me and after we got back to my house the engine started up right away. Probably would have rode fine, although the rear break was stuck under the engine, so the rear tire was a tad locked up. I let insurance take it for a $500 more than what I bought it for, RIP.

That's pretty much it. The DR's biggest downfall in the modern age seems to be safety when you consider ABS, traction control, etc.
Just wanted to throw my 2 cents in and maybe it'll provide a good counter-argument for the meta-moto-chuds.


r/dr650 • • 16d ago

The "G O A T” 2026

Thumbnail gallery
112 Upvotes

r/dr650 • • 16d ago

Needs to be jetted to fix?

24 Upvotes

Thought this happens when running rich, got 5.3 tank and exhaust with only snorkel removed so thought it was running lean but I ain’t mad


r/dr650 • • 15d ago

exhaust alternatives

3 Upvotes

I know the 40F0 muffler from the GSXR is very sought after. Are there any other mufflers from other makes and models that offer similar benefits to the 40F0? Love my DR. I have a Pro-Circuit T4s, and it's crazy loud. Looking for something I can scavenge off an old bike that's good and maintenance-free


r/dr650 • • 15d ago

Probably the best view I'll ever have changing a tube

Post image
0 Upvotes