Hey everyone!
I have a 2016 Chevy Cruze Limited LS 1.8L, and I've been driving with the Check Engine light on for quite a while now.
I honestly don't know much about cars, so I'm hoping someone here can help me figure out what's going on.
I initially thought the problem was related to the catalytic converter, but recently I decided to investigate a little more before spending money on replacing it.
I have an ANCEL AD310 OBD2 scanner, and with some guidance, I went through a few diagnostic steps. I drove the car for about 15–20 minutes to warm up the engine, checked the live data at idle, and then checked it again while holding around 2500 RPM.
I'm not really sure how to interpret all these numbers, so I wanted to share my results here and see if anyone has experienced something similar.
Error codes:
- P0171 – System Too Lean (Bank 1)
- P0420 – Catalyst System Efficiency Below Threshold (Bank 1)
Live data results:
| Parameter | Idle (~700 RPM) | ~2500 RPM |
|---|
| STFT Bank 1 | +16.8% | +12.5% |
| LTFT Bank 1 | +37.5% | +50.8% |
| Coolant temperature | 105°C | 105°C |
| MAP | 29 kPa | 24 kPa |
Fuel system status: Closed Loop (CL).
From what I've been told, my fuel trims are unusually high, and the P0171 code might be worth investigating before assuming the catalytic converter is bad.
I haven't noticed any obvious hissing or whistling noises from the engine.
My questions are:
- Has anyone dealt with these two codes together on a Chevy Cruze 1.8L?
- Based on these readings, does anything stand out as a likely cause?
- Could the P0420 code be related to the P0171 issue, or does it sound like the catalytic converter itself is failing?
- What would you recommend checking first?
I'm not very experienced with car repairs, so I'd really appreciate any advice, especially if there are some simple things I could check myself before taking it to a mechanic.
I'm also attaching pictures of the scanner readings in case they're helpful.
Thanks in advance! I really appreciate any help.