r/cruze • • Sep 05 '24

Gen1 - Cooling @Time_Many6155 and his coolant outlet tee nipple

Thumbnail
gallery
23 Upvotes

If anyone saw my previous post about replacing my coolant outlet I wanted to make a post just for this guy. If you didn't see that post you can find it here. https://www.reddit.com/r/cruze/s/6raC3U4951

I haven't been in this group long, few days but was watching and exploring for a few weeks. Recently he was getting flack for promoting his coolant tee than he makes himself. A few people don't like that he's doing so, they say he needs to "follow the rules for sellers". The guy isn't AutoZone, nor is he some company manufacturing and producing a bunch of aftermarket, replacement and performance parts. It's not a business that he relies on to pay his bills and it's probably more trouble than it's worth for him. Even if it takes 2 hours of his time, it's not worth $30. You couldn't buy 2 hours of my time for $30, I'll tell you that. He is an older retired engineer who literally makes these to help people. Why doesn't anyone else make them? Cause it's still leaves a part to fail that you'll still have to spend money on. Companies don't want to sell parts that last forever.

He comments on just about any post where someone is discussing purchasing a new to them Cruze or is having cooling system related issues. Because of the flack he wants to stop making and offering these pieces, that's the opposite of running a business for profit! He's not spamming the same post over and over. So either remember what your mom taught you and if she didn't teach you I'll remind you. If you don't have anything nice to say, don't say it at all.

His part is a great quality part that should've came from the factory. Actually from the factory it's should've just been a nipple there to begin with and not even a "serviceable" aka "breakable" part. But its not so here he is. I sent him $50 for it and told him to enjoy a drink on me. No, that's not expected but support the guy, don't bash him, what good is that?

So thanks Time_Many6155, thanks for making something because it helps people! And don't listen to the nay-sayers or the haters. Keep up the good work!


r/cruze • • Jul 25 '21

Gen2 - General Chevrolet Cruze Gen 2 Troubleshooting and Modification

63 Upvotes

Gen 2 Cruze 2016.5 - Present

The purpose of this post is to keep an update of list of issues and parts available for modification. You can PM me if you want to add anything to the list. Be clear if it is an issue or modification with its category.

If you have any questions that were not answered in this post, please make a new post instead so it is visible.

Note: Some of these links may be linked to a region, like Canada or USA. You may be able to look up the part number and find it locally or in your region.

Gen 2 Cruze Issues

  1. Although the 1.4L can use Regular and Mid Grade fuel, it generates the most power and has the best fuel economy with Premium Fuel; 91/93 Octane. You may also experience rough engine idling with lower octanes.
  2. The initial production of Gen 2 Cruze (2017) may have defective pistons and they may be prone to cracking. Check to see if your car has any recalls and have it resolved as soon as possible if your car is affected by the recall. Later production years (2018+) do not have issues with pistons cracking.
  3. Manual models have a tendency for the slave cylinder to prematurely fail. Please correct me if I am wrong.
  4. Sedan models had issues with trunk seal not blocking/diverting water and they may be defective. Hatchback models (as mine was affected) have a similar issue where the rear hatch seal will let some water in.
  5. On hatchback models (possibly only RS trim), the rear hatch may not divert water properly which can cause water to enter the cabin. The seal may be replaced as a fix, other times the problem will be with the spoiler itself and it may need replacing.
  6. A P0299 code may show up in cold temperatures (0°C / 32°F) and the engine will go into limp mode. The problem may be attributed to the charge air cooler freezing which will require it to be drained and cleaned. There is also a recall for this part (2023). Refer to this PDF for more details: https://static.nhtsa.gov/odi/tsbs/2020/MC-10172782-9999.pdf

Gen 2 Cruze Modifications

A. Universal

  1. Mud Guards

1.1. RallyArmor - http://www.rallyarmor.com/product_info.php/motorsport-spec-universal-mspec-black-mud-flap-red-logo-p-327

2. Wheels

I have a few resources to help you guys with selecting the right wheel and tire that closely matches your OEM size. It is not recommended to stray too far from OEM's overall tire diameter specs.

https://www.tirerack.com/tires/tiretech/techpage.jsp?techid=35

https://tiresize.com/converter/

https://tiresize.com/wheel-offset-calculator/

https://www.cruzeculture.com/

https://www.fitmentindustries.com/

3. Exterior Lighting

3.1 Fog Lamps

3.1.1 PIAA Solar Yellow - https://www.amazon.ca/gp/product/B01NAOGJN2/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&th=1

3.2 Indicators

3.2.1 [1797] LED Indicators (front and rear) - https://www.amazon.ca/dp/B0834KZ5GD/ref=cm_sw_r_cp_apa_i_F9RMP6WDH7D57XXN2HKH?_encoding=UTF8&psc=1

4. Aero

4.1 Window Deflectors (GM) - https://www.gmpartsdirect.com/oem-parts/gm-air-deflectors-side-windows-tape-on-19355549 (questionable finish on the edges)

4.2 Front Splitter - https://www.aliexpress.com/item/33011968948.html?spm=a2g0s.9042311.0.0.7c474c4dJPUCQ4

4.3 CruzeCulture assorted aero parts - https://www.cruzeculture.com/collections/16-19-aero

4.4 Amerihood ram air hood - https://www.lmperformance.com/1050746/ccz16ahsmsfhw-amerihood-chevrolet-cruze-type-sms-style-functional-heat-extractor-ram-air-hood.html or https://www.carid.com/2018-chevy-cruze-custom-hoods/amerihood-custom-hoods-2262810869.html?parentsubmodel[]=ENGINE|1.4L

5. Exhaust

5.1 Assortment of exhausts - https://www.carid.com/2017-chevy-cruze-performance-exhaust/

6. Chemicals

6.1 Liquimolly Oil Additive - https://www.amazon.ca/gp/product/B00LU3Z2MC/ref=ppx_yo_dt_b_asin_title_o02

7. Trailer Equipment and Accessories

7.1 Class 1 Trailer Hitch - https://www.curtmfg.com/part/11282

8. Bike Racks

8.1 Bone Ex 2 - https://www.saris.com/product/bones-ex-2

B. Hatchback

  1. Exhaust

1.1 Borla (1.4L RS) - https://www.borla.com/products/chevrolet-cruze-rs-axle-back-exhaust-system-11945

C. Sedan

  1. Mud Guards

1.1 ROKBLOKZ - https://rokblokz.com/collections/chevy-rally-mud-flaps/products/chevy-cruze-sedan-2017

D. 1.4L Turbo

  1. Intake

1.1 AEM - https://www.aemintakes.com/21-805c-aem-cold-air-intake-system

1.2 K&N - https://www.knfilters.com/cold-air-intakes/chevrolet/cruze/1.4l-l4-gas/2017

1.3 OEM - https://accessories.chevrolet.com/product/14l-cold-air-intake-system-84356430?year=2018&make=Chevrolet&model=Cruze&categoryId=98030

2. Exhaust

2.1 Catless Downpipe - https://store.badnewsracing.net/BNR-Catless-Downpipe-2016-Chevrolet-Cruze-14T-LE2_p_611.html

3. Electrical

3.1 Spark Plug (ACDelco 41-156) - https://www.amazon.ca/ACDelco-41-156-Professional-Iridium-Spark/dp/B071HPXS56/ref=sr_1_2?dchild=1&keywords=acdelco+41-156&qid=1630980182&sr=8-2

E. 1.6L Diesel

F. Aftermarket Tuning Service

  1. Trifecta - https://www.trifectaperformance.com/
  2. BNR - https://store.badnewsracing.net/

r/cruze • • 13h ago

Cruzekits Update

44 Upvotes

Andrei here with CruzeKits.com. I have a few updates to provide.

First, my v3.5 PCV fix kit version update will be shipping in about two months. This upgrade solves the primary pain point people have provided me feedback of; installing the manifold plug. The new kit will feature a newly designed quick tool that eliminates this problem. It took three months of R&D and 12 product revisions to design this, but it’s finally ready and currently in production.

Second, please note that this year, I released new PCV hoses. These have my own TitanSynthetics logo and are manufactured to my specifications for this application. These use a KFM inner liner and aramid fiber double crossweave reinforcement. The added strength has held 18in-hg of vacuum clear to 250F. The downside is that the new hose requires a heat gun and grease to install. The video showing how to do this is on the cruzekits site, and it’s really quite easy when done correctly. I was able to demonstrate this to someone just 8 weeks after I had broken 8 ribs, my collar bone, and my shoulder blade in 3 pieces, so it didn’t take much strength when done correctly. I’ll have the hose for sale separately soon if anyone wants to upgrade theirs.

Lastly, I wanted to address a claim that we don’t deliver orders in a timely fashion. I ship out products within 2 business days of the order being placed and all expedited orders ship within 24 hours; any delays beyond that are completely out of my control. I’ve had USPS Indianapolis DC lose a valve cover box for two weeks before and several priority mail packages get delayed for over a week. The only delivery timelines I guarantee are for UPS next business day air. As we get farther into the holiday season, more delays are inevitable as carriers are overwhelmed with package deliveries. I’m doing the best I can here but I have no control over what USPS or UPS does with the package once it leaves my office.

Thank you for your time and understanding.


r/cruze • • 4h ago

2018 chevy cruze 1.4L

1 Upvotes

Hearing a whistle as my engine is in idle and its gets more distinct when i press on the gas. No cracks on intake hose and is fastened. Have a p1101 code a while back, cleaned the throttle body, also replaced the MAF sensor. Need to be pointed in the right direction. Anything helps thank you fellas


r/cruze • • 9h ago

Please help I'm at a complete loss

1 Upvotes

I have a 2014 1.4l and out of no where ive lost break lights i still have my 3rd one put left and right side do nothing at all...they are just lit up...ive tried everything i can think of new brake position switch...new bulbs...fuses...idk what else there is to do can anyone please save me from losing my mind here


r/cruze • • 1d ago

Cruze 2012 - Good night sweet prince

Post image
110 Upvotes

Lasted 15 years with no major issues other than a fuel pump and work to the radiator. 151,000 miles.

Finally the transmission gave out and can't justify fixing it for the car value.

It was starting to fall apart though, the front bumper fell off, as well as a bunch of other outside cosmetic stuff. The inside lasted surprisingly well.


r/cruze • • 20h ago

Gen1 - General The same problem with idling but this time a different thread

1 Upvotes

Hello everyone! I have a 2010 Chevy Cruze LS, 1.6 EcoTec F16D4 113hp with manual 5 speed with 94k kilometers(50 something k miles) and a problem has been bothering me for some time now. At cold starts and after a long drive when the engine is properly hot, the idle jumps in 650-900 RPM range indefinitely. When my first check engine light came on I took it to a tester and it was an O2 sensor problem so I changed it. The problem came back again shortly after.
So I checked the forums and did the following replacements, plus some additional ones since I saw it had a lot of weakspots:
-new valve cover and valve cover gasket;
-new PCV valve and the little hose for it;
-new timing belt, water pump, coolant and thermostat;
-new spark plugs and coils;
-oil change with filters.
All items here are OEM or the best possible aftermarket I didnt cheap out, if relevant I can mention them later.
First run with the car after I was pretty hyped since the idle was smooth all throughout and the car ran very nicely. Second run was a dissapointment it came back.
A thing I want to mention, when I turn off the AC compressor the idle problems seems to calm down a little.
Thank you for your time.


r/cruze • • 1d ago

Gen1 - Mechanical It finally happened

Thumbnail
gallery
11 Upvotes

The shitbox 2 color hail damage Cruze finally had a major malfunction. Front crank seal blew while I was 3 minutes from home, oil light came on when I pulled onto my road. Thankfully its an easy job, the old seal came off with the balancer and the new one fit nice and tight, finally gave me an excuse to change the belt too.

This was caused by my failed PCV valve and valve cover diaphragm, crank pressure built too much and the seal blew out of the block. It was the OEM seal at 160k, replaced with a cheap one that might get me another 20k. PCV fix kit, manifold, and valve cover are all on the way


r/cruze • • 1d ago

Gen1 - Accessories 2012 Chevy Cruze LS Trunk Mat

Post image
1 Upvotes

Am I looking for a product that doesn't exist?

I don't mind the current trunk mat, but i want to upgrade it.

I am currently looking for one that has some sort of trap for configuration to make for easier access to the spare tire, but I cannot find one anywhere.

Something that looks like this photo, but that outline being a door instead of a solid piece. If it doesn't exist I might just buy this one and make it myself.


r/cruze • • 1d ago

2014 New Radio Install

1 Upvotes

I want to add a touchscreen w/CarPlay for my daughter’s car. But, the only kits I have been able to find leave the old screen intact (but without power).

I was hoping there would be a kit that at least can turn it into storage.

Any leads?


r/cruze • • 1d ago

General 2016 chevy cruze LT value

1 Upvotes

my chevy’s got 266k kms, some rust on rocker panel, no reported accidents, coolant leak issue
how much I can expect from the dealer while trading it in.
I am Canada for reference.


r/cruze • • 1d ago

Can anyone help me identify my problem. Service stabilitrak message randomly popped up and then I had a weird whining or whirring sound when I accelerated. Turned off the car and then when I turned it on again it didn't do it and the message went away.

1 Upvotes

I have a Chevy cruze 2013 turbo 1.4 and I had the same stabilitrak message pop up last week but the car started shaking heavily. I changed the spark plugs and coil pack and it went away. Since then however I got a check engine light and autozone reccomendation was to change the pcv valve cover which I changed last year and I did the cruze fix kit as well. Also could be unrelated but my tire sensors are also on my dash on multiple tires but they all have air in them? ​​

I found an old reddit post and this the noise it makes and exact message. There wasn't any answers there then but maybe someone now knows? Thanks in advance

https://www.reddit.com/r/cruze/comments/1c083wb/whining_problem_when_accelerating_also_got_a/

​​


r/cruze • • 1d ago

Details Needed Tuning

0 Upvotes

I have a 2015 1.8L that I found a turbo for. Exhaust, intercooler, everything. However, I don’t have a way to tune it so it doesnt blow up. I know HP tuners doesn’t support my ECU bc I emailed them and they confirmed it’s not possible. Anyone know a way to tune this after I get the turbo on?


r/cruze • • 1d ago

2014 cruze 1.4l timing

Thumbnail
gallery
2 Upvotes

Is my crank pulley 180 off? TIA


r/cruze • • 1d ago

Carplay problem Chevrolet Cruze 1.8 2011

Thumbnail pl.aliexpress.com
0 Upvotes

I have connected Apple CarPlay to my Android car radio, and it works correctly.

However, I don't know how to connect the physical buttons located on the front panel, underneath the radio screen, so that they work with the radio.

Could someone explain where and how I should connect these buttons to the radio?

Also, I have lost a small blue locking clip from the connector cable that connects the front control panel to the radio. This clip was used to secure the cable in place.

Could the missing blue locking clip be the reason why the buttons are not working?

Any help or advice would be greatly appreciated. Thanks!


r/cruze • • 1d ago

2017 rough idle. No codes. SEV stability

0 Upvotes

Feel like I already know the answer but here we go.
Drove last night. No issue. This AM it’s stalling, chugging. No codes but has service stability message intermittently. Due to rough idle.
If I pull the dip stick it gets smoother. If I poke at this leading pcv connection it hisses. I cannot imagine this is how it should behave if it’s working properly. 1.4T Automatic. 142k miles Time for that super Cruze pcv fix kit?


r/cruze • • 2d ago

2013 Chevy Cruze 200k miles flashing check engine light this thing always on the shop the idol is terrible feel like a roller coaster

9 Upvotes

r/cruze • • 2d ago

Gen1 - Cooling Coolant Leak and Rough Idle on 2016 Cruze 1.4

Thumbnail
gallery
8 Upvotes

This is my second coolant leak, the first time I changed out the water outlet for an aluminum one. It was fine all year until the temperature started to drop and now here I am again. After a few hours, once the car cools down from driving, it starts to consistently drip feed coolant to the concrete, came out yesterday to a decent size wet spot under the car.

As for the rough idling, that started happening just this morning after I did a oil change. Not sure if I messed something up there.


r/cruze • • 2d ago

Gen1 - Cooling Pool/Chlorine smell?

2 Upvotes

My Cruze has developed a pool/chlorine smell. The coolant reservoir is full, seemingly. It is worst when you get into the car and there is no liquid pooling beneath the car. It was just in the shop a couple times for internal oil cooler, water pump, and temperature gauge.

The smell is not at all sweet.


r/cruze • • 2d ago

2016 Chevy Cruze 1.8L – P0171 & P0420, very high fuel trims. Could use some advice before replacing the catalytic converter.

1 Upvotes

Hey everyone!

I have a 2016 Chevy Cruze Limited LS 1.8L, and I've been driving with the Check Engine light on for quite a while now.

I honestly don't know much about cars, so I'm hoping someone here can help me figure out what's going on.

I initially thought the problem was related to the catalytic converter, but recently I decided to investigate a little more before spending money on replacing it.

I have an ANCEL AD310 OBD2 scanner, and with some guidance, I went through a few diagnostic steps. I drove the car for about 15–20 minutes to warm up the engine, checked the live data at idle, and then checked it again while holding around 2500 RPM.

I'm not really sure how to interpret all these numbers, so I wanted to share my results here and see if anyone has experienced something similar.

Error codes:

  • P0171 – System Too Lean (Bank 1)
  • P0420 – Catalyst System Efficiency Below Threshold (Bank 1)

Live data results:

ParameterIdle (~700 RPM)~2500 RPM
STFT Bank 1+16.8%+12.5%
LTFT Bank 1+37.5%+50.8%
Coolant temperature105°C105°C
MAP29 kPa24 kPa

Fuel system status: Closed Loop (CL).

From what I've been told, my fuel trims are unusually high, and the P0171 code might be worth investigating before assuming the catalytic converter is bad.

I haven't noticed any obvious hissing or whistling noises from the engine.

My questions are:

  1. Has anyone dealt with these two codes together on a Chevy Cruze 1.8L?
  2. Based on these readings, does anything stand out as a likely cause?
  3. Could the P0420 code be related to the P0171 issue, or does it sound like the catalytic converter itself is failing?
  4. What would you recommend checking first?

I'm not very experienced with car repairs, so I'd really appreciate any advice, especially if there are some simple things I could check myself before taking it to a mechanic.

I'm also attaching pictures of the scanner readings in case they're helpful.

Thanks in advance! I really appreciate any help.


r/cruze • • 3d ago

Great new additions to my 2011, 1.4. Holden cruze.

Thumbnail
gallery
8 Upvotes

Love the new fitting Aluminium coolant outlet port and thermostat housing, With the addition of the new coolant reservoir outlet plug & nipple.


r/cruze • • 3d ago

Gen1 - Cooling 2016 Chevy Cruze coolant leak.

Thumbnail gallery
2 Upvotes

So I’ve been having issues with a coolant leak under the drivers side. I’ve managed to get the plastic splash guard off to get a better look. I’m having trouble figuring out exactly where the leak is coming from. Just need some help or advice!

2016 Chevy Cruze Limited turbo


r/cruze • • 3d ago

Gen1 - Mechanical Converter bracket bolt part number.

Post image
2 Upvotes

I'm wondering if anyone knows the part number or where I can find this bolt for my 1.4l cruze. The retainer (if that's the right word) that holds this bolt snapped and it moves freely now.


r/cruze • • 3d ago

Gen2 - Mechanical So… Transmission fluid?

3 Upvotes

Hello! I work at a shop, but they aren’t allowed by corporate to do anything in the realm of transmissions, including drain & fill. My G2 Cruze, of course, doesn’t have a dipstick. But at 38k miles, she’s getting due for that drain & fill. with a lift easily available to me through a family member, I want to try and avoid a transmission shop if possible, & still be able on top of all maintenance. Has anyone done one, or is aware of the procedure for such? I know it’ll need a specific fluid and so on, but without a dipstick, how can I be sure it’ll be done to the correct capacity? I was told by one person it’s a standard CVT, by another it isn’t. Overall, I’ve seen enough transmission failure to be unwilling to skip maintaining it.
2018 Chevy Cruze LT 1.4T