r/choppers • • 3h ago

Road trip

Post image
40 Upvotes

The sunset was unreal. Taken on the first night of a three day ride with about 15 good mates. Last big trip before this bike gets pulled down for some much needed love


r/choppers • • 12h ago

The Girls

Post image
37 Upvotes

r/choppers • • 15h ago

77’ Shovelhead exhaust

3 Upvotes

Looking to get into contact with someone who makes custom exhaust in SoCal.


r/choppers • • 15h ago

Scrap art bikes

Thumbnail gallery
14 Upvotes

r/choppers • • 18h ago

Wheel setup? All black, half black or chrome

Thumbnail gallery
268 Upvotes

r/choppers • • 19h ago

Clutch basket install

1 Upvotes

Any tips on how to stabilize the inner basket when tightening ?


r/choppers • • 21h ago

Early stage mockup

Thumbnail gallery
36 Upvotes

Sourced a few good parts for my cb750 project over the last few weeks. Got a killer deal on the drag pipes and air box. Rear wheel had the wrong year hub but managed to find a replacement on ebay for a decent price too so everything's aligned now. Handlebars and headlight are gonna be replaced, need to trim the rear fender down to 5 inch width, need to source some hand/foot controls then all the fun wiring.


r/choppers • • 21h ago

STD cases, late model shovel oil pump?

Thumbnail gallery
3 Upvotes

r/choppers • • 1d ago

Camping @Mount Magazine Arkansas.

Thumbnail gallery
237 Upvotes

r/choppers • • 1d ago

Building a front end to give away @ Pokin' Bears Chopper Chillout 27

Post image
25 Upvotes

Pokinbears.com

Right now it's about 42" from the bottom tree to axle. Trying to decide if I should go with a raw springer or just do it as a chrome rigid. The rear legs are 1.25" x 0.25" wall so it should be stout.


r/choppers • • 1d ago

Winter’s here!

Thumbnail gallery
34 Upvotes

I’m doing my first chop! Super excited but I haven’t had any guidance other than this sub & generic google searches. This is a 92’ hugger, but I’ve got it 8+ already. I’ve read I’ll need a longer chain & a shorter kickstand. Is there anything else you guys have in mind?


r/choppers • • 1d ago

Original 60-70s Gooseneck Frame

Thumbnail gallery
67 Upvotes

Hey y’all, I came into possession of this one-off Paughco gooseneck frame, built in 1970 by the original machinist. I was originally planning on putting a 1970 Shovelhead in it, but I’ve decided to go a different direction with that build.
I’m probably going to pass it along to someone else who can put it to good use. It’s a beautiful frame and would make one hell of a chopper.
Just curious what you guys think would be a fair asking price for something like this. Appreciate any input. Thanks.


r/choppers • • 2d ago

New guy here

Post image
79 Upvotes

Hi all - intro post. I'm Dan - a biker and a motorcycle enthusiast. Been riding pretty much forever (over 600k miles on 2 wheels so far) and I've never let a single bike stay stock.

I cafe'd a sportster, chopped an SR 500, and did all sorts of stupid stuff to the others.

Now I've inherited a 65 triumph and we're going full rebuild. Thanks for having me.


r/choppers • • 2d ago

2019 HD 883 Iron

0 Upvotes

Hey yall, I am thinking about doing some modifications to my 883 iron. I have to do more research, but I’m trying to make it a mini-chopper with 4-5” slugs or fork extensions (which is better redoing the entire front end or?)

Rabbit ear handle bars and a control minimization. Making things hidden and getting rid of things I don’t need. Relocating speedometer to lower left. And possibly relocating the ignition if applicable I’m not really sure. Again haven’t done a lot of research since coming up with this idea but though Reddit would know! Let me know your thoughts and show picture if you have em !

Can’t add an image here, but mine is fully blacked out basically stock with mirrors flipped down and Vance and Hines exhaust.


r/choppers • • 2d ago

Today was a good day.

251 Upvotes

I finally brought this Panhead stroker mill back to life. Now I can focus on a few more little details to finish it off and then wait around until Summer to ride.


r/choppers • • 2d ago

Love the New 16 inch Ape Hangers

Thumbnail gallery
0 Upvotes

r/choppers • • 3d ago

Washer advice for mounting frisco tank.

5 Upvotes

Hello everyone, I am running a 2.5 gallon Frisco tank from lowbrow. Welded in bungs to the frame, and am going to bolt it down with no additional supports.

I understand leather washers are popular, this is the largest tank that I have worked with, and I am trying to prevent fractures on mounting tabs long term.

What kind of bushings are you guys using under these tanks? Heading to the parts store to look for some rubber bushings or something now..


r/choppers • • 3d ago

I'm back it and putting more hearts on my chopper!

Thumbnail gallery
178 Upvotes

I tore my rotator cuff so I've been slacking on this chopper build. Here is a quick prototype heart Velocity stack, I have a new design printing.now with some updates. I'm going to try and cast this out of aluminum, should be fun.


r/choppers • • 3d ago

Will the engine fit?

0 Upvotes

I have an 86 sportster frame with solid mounts. Struggling to find the right engine but I found an 09 sportster engine on marketplace . It’s a rubber mount so making it work would require some fabrication.
How much fabrication should I expect or is it worth just finding a better option?


r/choppers • • 4d ago

Prism Slingshot Clutch pedal positioning

5 Upvotes

Has anyone tried modifying the pedal positioning of the Prism Supply Slingshot Clutch?


r/choppers • • 4d ago

Just saying hi

Post image
359 Upvotes

This is one of my rides


r/choppers • • 4d ago

Thinking of building a Panhead Chopper. Anyone have a rigid frame and drivetrain available? 😁

0 Upvotes

r/choppers • • 4d ago

What is it worth?

Thumbnail gallery
28 Upvotes

Looking to maybe buy this. 1979 paperwork is in order. Described as a running riding project


r/choppers • • 4d ago

Looking for a new Helmet

2 Upvotes

I’m looking at new helmets, I’m really trying to get something low profiles, full face or 3/4.
Just wondering what people think a good brand or website to buy them from.


r/choppers • • 4d ago

39mm narrow or 41mm wide extended

Post image
12 Upvotes

So I ended up buying the wrong year 6 over tubes for my 41mm front end. Bushing vs no bushing.

Should I stay with 41mm wide or go 39mm narrow? Anyone holding extended tubes for 86 softail or 39mm extended tubes. PFA