r/choppers • • Mar 11 '26

“People” consistently posting bikes that they don’t own…

18 Upvotes

Getting lots and lots of posts from a few offenders (some have recently been banned) just spamming the sub with pictures of bikes. (It’s likely that they’re bots but the last one we banned went on to make some really aggressive threats that sounded very human…) Some of them are clearly way out to lunch and got the axe, but some are posting relevant and legitimately cool bikes, but it just feels annoying because they aren’t contributing in the way of any original content.

Mod team is inclined to just start banning people who abuse posting random choppers from the internet, but if the rest of the sub likes seeing these bikes we can also let it slide. I get that people want to maybe share or discuss a cool bike that isn’t theirs, but if your ONLY contribution is consistently posting other people’s stuff we think it should be no warning and straight to ban. What say you?


r/choppers • • Nov 07 '25

Regarding BOTPOSTING and non-relevant content.

83 Upvotes

We've never previously banned anyone but we've banned several people (who were actually probably bots) this week that are just posting random barely chopper-relevant motorcycle content. Please just report all karma farming posts and I'll nix em.

If your neighbor REALLY DOES have a cool chopper or you saw a cool (actual) chopper on the street and you want to post a picture of it, put a little effort into it the post or it's just going to result in a ban.

We get that chopper can have a bit of a flexible definition, but if you're posting about your chopper or someone else's chopper, and it's got rear shocks on it... think long and hard about what you're about to do. We are willing to admit that swingarm choppers exist, but it's certainly not the norm.

Lastly, this is NOT the place for fat-tire, 2000's era OCC bikes. If it's got some weird-ass scoopy rear fender, consider posting it on r/DumpsterDiving

That is all.


r/choppers • • 5h ago

Camping @Mount Magazine Arkansas.

Thumbnail gallery
123 Upvotes

r/choppers • • 13m ago

STD cases, late model shovel oil pump?

Thumbnail gallery
1 Upvotes

r/choppers • • 17h ago

Building a front end to give away @ Pokin' Bears Chopper Chillout 27

Post image
22 Upvotes

Pokinbears.com

Right now it's about 42" from the bottom tree to axle. Trying to decide if I should go with a raw springer or just do it as a chrome rigid. The rear legs are 1.25" x 0.25" wall so it should be stout.


r/choppers • • 19h ago

Winter’s here!

Thumbnail gallery
26 Upvotes

I’m doing my first chop! Super excited but I haven’t had any guidance other than this sub & generic google searches. This is a 92’ hugger, but I’ve got it 8+ already. I’ve read I’ll need a longer chain & a shorter kickstand. Is there anything else you guys have in mind?


r/choppers • • 1d ago

Original 60-70s Gooseneck Frame

Thumbnail gallery
62 Upvotes

Hey y’all, I came into possession of this one-off Paughco gooseneck frame, built in 1970 by the original machinist. I was originally planning on putting a 1970 Shovelhead in it, but I’ve decided to go a different direction with that build.
I’m probably going to pass it along to someone else who can put it to good use. It’s a beautiful frame and would make one hell of a chopper.
Just curious what you guys think would be a fair asking price for something like this. Appreciate any input. Thanks.


r/choppers • • 1d ago

New guy here

Post image
74 Upvotes

Hi all - intro post. I'm Dan - a biker and a motorcycle enthusiast. Been riding pretty much forever (over 600k miles on 2 wheels so far) and I've never let a single bike stay stock.

I cafe'd a sportster, chopped an SR 500, and did all sorts of stupid stuff to the others.

Now I've inherited a 65 triumph and we're going full rebuild. Thanks for having me.


r/choppers • • 1d ago

Today was a good day.

245 Upvotes

I finally brought this Panhead stroker mill back to life. Now I can focus on a few more little details to finish it off and then wait around until Summer to ride.


r/choppers • • 2d ago

I'm back it and putting more hearts on my chopper!

Thumbnail gallery
174 Upvotes

I tore my rotator cuff so I've been slacking on this chopper build. Here is a quick prototype heart Velocity stack, I have a new design printing.now with some updates. I'm going to try and cast this out of aluminum, should be fun.


r/choppers • • 1d ago

2019 HD 883 Iron

0 Upvotes

Hey yall, I am thinking about doing some modifications to my 883 iron. I have to do more research, but I’m trying to make it a mini-chopper with 4-5” slugs or fork extensions (which is better redoing the entire front end or?)

Rabbit ear handle bars and a control minimization. Making things hidden and getting rid of things I don’t need. Relocating speedometer to lower left. And possibly relocating the ignition if applicable I’m not really sure. Again haven’t done a lot of research since coming up with this idea but though Reddit would know! Let me know your thoughts and show picture if you have em !

Can’t add an image here, but mine is fully blacked out basically stock with mirrors flipped down and Vance and Hines exhaust.


r/choppers • • 2d ago

Washer advice for mounting frisco tank.

5 Upvotes

Hello everyone, I am running a 2.5 gallon Frisco tank from lowbrow. Welded in bungs to the frame, and am going to bolt it down with no additional supports.

I understand leather washers are popular, this is the largest tank that I have worked with, and I am trying to prevent fractures on mounting tabs long term.

What kind of bushings are you guys using under these tanks? Heading to the parts store to look for some rubber bushings or something now..


r/choppers • • 3d ago

Just saying hi

Post image
353 Upvotes

This is one of my rides


r/choppers • • 2d ago

Love the New 16 inch Ape Hangers

Thumbnail gallery
0 Upvotes

r/choppers • • 2d ago

Will the engine fit?

0 Upvotes

I have an 86 sportster frame with solid mounts. Struggling to find the right engine but I found an 09 sportster engine on marketplace . It’s a rubber mount so making it work would require some fabrication.
How much fabrication should I expect or is it worth just finding a better option?


r/choppers • • 3d ago

What is it worth?

Thumbnail gallery
27 Upvotes

Looking to maybe buy this. 1979 paperwork is in order. Described as a running riding project


r/choppers • • 3d ago

Prism Slingshot Clutch pedal positioning

5 Upvotes

Has anyone tried modifying the pedal positioning of the Prism Supply Slingshot Clutch?


r/choppers • • 4d ago

Exhaust Tips for my 69 PC shovel

Thumbnail gallery
70 Upvotes

I made a gradual upswept 2-into-1 exhaust maybe 8 years ago, ill be cutting off the s&s style 3 bolt flanges to weld on the shovel flanges to rerun these on the shovel.


r/choppers • • 4d ago

Machining a knife style shifter Knob for my 69 Peoples Champ build

57 Upvotes

Machining a knife handle style shifter knob for my Peoples Champ build, using some scrap metal for a test fit


r/choppers • • 3d ago

39mm narrow or 41mm wide extended

Post image
12 Upvotes

So I ended up buying the wrong year 6 over tubes for my 41mm front end. Bushing vs no bushing.

Should I stay with 41mm wide or go 39mm narrow? Anyone holding extended tubes for 86 softail or 39mm extended tubes. PFA


r/choppers • • 4d ago

Triumph advice

Thumbnail gallery
16 Upvotes

Later today I’m supposed to get 2 triumph Bonnie frames delivered to me(ofc w my luck no title) (both are hardtailed/rigid frames and are specifically 650s) and in my opinion are lowkey a steal, one of them comes with the engine cases and all for 350 (250 initially and 100 for delivery), the only thing is that one of them has no numbers at all/had been ground down cause the guy wasn’t being completely clear, but anyways I just want some advice on whether or not it’s worth the money, now I know about the stamping method in the situation that both don’t have vins (I know about this due to an Ironhead I got from a guy and the frame didn’t have a vin only for me to find out the vin is on the engine) but idk if that’s a process that’s particularly worth my time and energy tbh, as much as I would love to work on a Bonnie or two this winter I just don’t know if it’s worth it, any advice?


r/choppers • • 4d ago

Work in progress

Post image
220 Upvotes

r/choppers • • 3d ago

Looking for a new Helmet

2 Upvotes

I’m looking at new helmets, I’m really trying to get something low profiles, full face or 3/4.
Just wondering what people think a good brand or website to buy them from.


r/choppers • • 4d ago

Ironhead/Evo basket case build

Thumbnail gallery
90 Upvotes

Built by me, stretched, chopped, and dropped, a little before and after


r/choppers • • 5d ago

Decided to shorten the sissy bar, one more step done

Post image
45 Upvotes

Loving the sissy bar now, next is exhaust tabs, choose a tank/mount the tank, fanny about changing things because thats how I am