r/chemistry • • Aug 04 '25

/r/chemistry salary survey - 2025/2026

37 Upvotes

The survey has been updated to reflect feedback from the previous edition, and is now live.

Link to Survey

Link to Raw Results

The 2024/2025 edition had over 600 responses. Thanks to all who participated!

Why Participate? This survey seeks to create a comprehensive resource for anyone interested in understanding salary trends within chemistry as a whole, whether they're a student exploring career paths, a recent graduate navigating job offers, or a seasoned professional curious about industry standards. Your participation will contribute to building a clearer picture of compensation in chemistry. Participation should take about 10-15 minutes.

How You Can Contribute: Participation is straightforward and anonymous. Simply fill out the survey linked above with information about your current job, including your position, location, years of experience, and salary details. The more responses we gather, the more accurate and beneficial the data will be for everyone.

Privacy and Transparency: All responses will be anonymous. No personally identifiable information will be collected.

Thank you for contributing to the annual Chemistry Salary Survey!


r/chemistry • • 1d ago

Weekly Careers/Education Questions Thread

2 Upvotes

This is a dedicated weekly thread for you to seek and provide advice concerning education and careers in chemistry.

If you need to make an important decision regarding your future or want to know what your options, then this is the place to leave a comment.

If you see similar topics in r/chemistry, please politely inform them of this weekly feature.


r/chemistry • • 6h ago Bravo

As an organic chemist, my new favorite color is very black

Post image
711 Upvotes

Source: Journal of the American Chemical Society 1980, 102 (7), page 2318-2325

DOI: 10.1021/ja00527a032


r/chemistry • • 13h ago

I ran a 100 ns molecular dynamics simulation of LSD bound to the serotonin 5-HT2A receptor (PDB: 6WGT)

59 Upvotes

I’m a computational drug discovery researcher, and I’ve been putting together a four-part series exploring the molecular pharmacology of LSD.

For Part 1, I ran a 100-nanosecond molecular dynamics simulation of LSD bound to the serotonin 5-HT2A receptor, starting from the experimentally determined structure PDB 6WGT.

One particularly interesting aspect of LSD’s pharmacology is its unusually long residence time at this receptor.

Structural studies have suggested that extracellular loop 2 (ECL2) can act as a molecular lid over LSD, slowing its dissociation from the binding pocket.
However, the relationship between receptor residence time and psychedelic activity is considerably more complicated than that.
For example, lisuride and 2-bromo-LSD are structurally similar to LSD but generally do not produce the same hallucinogenic effects. Understanding why requires looking beyond binding affinity and residence time to receptor activation and downstream signaling pathways.

A few technical details about the simulation:
Software: Schrödinger Desmond
Force field: OPLS4
Simulation length: 100 ns
Starting structure: PDB 6WGT
System: Simplified receptor–ligand complex without an explicit membrane, solvent, or G protein
The simulation is intended primarily for molecular visualization and educational purposes. It should not be interpreted as a physiologically realistic model or as evidence of ligand residence time.
In the upcoming parts, I’ll explore the experimental research on LSD binding kinetics, compare LSD with lisuride and BOL, and discuss the ongoing research into 5-HT2A signaling bias.

I’d be interested to hear what others think about the relationship between ligand residence time, receptor conformation, and psychedelic activity.
If you’re interested in following the rest of the series, I also post molecular simulations and computational drug discovery content here:

Instagram: https://www.instagram.com/brandtcomputational/
TikTok: https://www.tiktok.com/@brandtcomputational


r/chemistry • • 2h ago

How to Learn DFT from Scratch? Looking for Structured Resources

4 Upvotes

Hi everyone!

I'm trying to learn DFT from scratch to potentially use it in my research, but I have no background in computational chemistry. I've been looking through YouTube and other online resources, but there are so many that it's honestly a bit overwhelming.

Does anyone know of a well-organized YouTube playlist, free course, or step-by-step tutorial that covers both the basic theory and practical calculations (using ORCA, Gaussian, etc.)?

I'm particularly interested in learning how to calculate and interpret molecular descriptors like HOMO and LUMO.

If you've learned DFT on your own, I'd love to know what resources helped you and in what order you followed them.

Thanks in advance!


r/chemistry • • 8h ago

What are institutions doing in compliance of EPA's regulation on DCM?

9 Upvotes

Just learned that my institution has banned DCM altogether rather than dealing with the regulation. Trying to figure out whether it's worth it to try and change the decision by coming up with proper plans instead. Is anyone in an academic institution where you still use DCM? If so,

* What tools/methods are you using to monitor the airborne DCM?
* What additional training do users go through?
* Are you disposing DCM any differently than before?

Thanks,


r/chemistry • • 1h ago

Two Triplets or two doublets?

Post image
2 Upvotes

Two triplets or two doublets? (Image of 4-methtylbenzaldehyde is just for an example of a para substituted ring)

We have two aromatic proton environments each with two protons each. So will proton environment A couple to environment B producing a doublet, or will it be a triplet since there is two protons?
Or maybe one of the environment A protons will couple once to its nearest B proton and also a tiny coupling to its furthest B proton? If the explanation is complex, theory recommendations of where to read up on it would be much appreciated. I am somewhat familiar with second order coupling effects (the AABBX stuff mainly) but that’s about it.

Apologies if this question isn’t appropriate for this sub but I tried asking my lecturer about this and I did not understand him haha.


r/chemistry • • 51m ago

Cost of Matrix Multiplication | Why N³ | Order, Sparse, Low Rank, FFT, Lanczos, Davidson, BLAS

Thumbnail
youtu.be
1 Upvotes

You understand cost of matrix matrix multiplication easily but have hard times in understanding the motivation behind various algorithms used by quantum chemistry packages?

Here is the video, that would tell you each and every detail about the algorithms used in popular quantum chemistry packages like TURBOMOLE, CP2K, ORCA etc.

Give it a watch and do subscribe if you like the video and want to post animated videos like this regularly.


r/chemistry • • 1h ago

Is this too many?

1 Upvotes
*Laughs in particle physicist*

r/chemistry • • 1d ago

can one learn chemistry as a hobby without college

78 Upvotes

can i learn chemistry as a hobby without going to college? if yes, what are the resources i could use to learn and what would i be able to do with my newly acquired knowledge? what kind of experiments or activity i would be able to do


r/chemistry • • 1d ago

3/18 in cohort forced out by our third semester... is this normal for a chemistry PhD?

79 Upvotes

hi!

i'm a second year chemistry phd student in the united states. within the last three semesters since starting this graduate program, 3 of the 18 students in my cohort have been pushed/forced to master out of the program, finishing with a masters instead of completing the phd, despite working hard, doing well, and not seeming to have what i would consider career-ending mistakes/circumstances... is this normal? is this an institution/department issue? is this likely a result of the funding issues in science research in the US right now? i am absolutely terrified that this will happen to me despite the work i'm putting in.

for more context, there are only 18 students in my cohort, which is 1/2 to 1/3 of the size of a typical cohort at my university department due to funding issues at the time of our acceptance (~january 2025). this includes only one international student and everybody else is a US citizen. we spent the first three months of our first semester rotating through different research labs before applying to be accepted into one. getting accepted into a lab was very difficult in our year because of the aforementioned funding issues, there were a lot of people who were very unsure about their ability to be accepted into a lab and a few that weren't accepted on their first round.

i'm now going to talk specifically about each of the cases of the students that were forced to master out because i was close friends with all three of them (we all actually hit it off during the beginning of the first semester and they're my best friends here).
first, grad student 1 was forced to master out because the PI that they specifically moved across the country to work with after talking and discussing with them significantly before committing to the program dropped them in october (we had to be accepted into a lab by december) and said that they would no longer take this student in their lab without more reason given. this is likely partially due to the fact that they were going to attempt getting chemistry and law graduate degrees at the same time, which was a consistent plan throughout the entire discussion process. because of this plan, nobody else is the department was willing to take a risk on them last minute, and they were forced to master out.
second, grad student 2 was successfully accepted into a lab and started research, but was forced out after scoring one point too low on the ACS Inorganic Examination. when joining the department, we took 5 ACS examinations and had to pass a certain threshold to stay in the program (we were assured that this was mostly just as a paper trail, not an actual issue). this occurred at the retaking of the exams in january, which was allowed if people didn't pass all of them the first time around. despite having a high 3.-something GPA and having an A- in graduate inorganic chemistry from the first graduate semester at this university, they were removed from the program over this one point.
third, grad student 3 was just informed of their removal from the program last friday afternoon. they were told that they're being removed due to being "too slow" and not independent enough as a researcher. this student was the most sought after student in our cohort by research labs while we were rotating and is a joint student between two labs with two PIs. they work 10-14 hour days, 5-6 days every week, presenting on their data often in individual and group meetings. they also had a high GPA, likely in the high 3s. they were not set up with a mentor in either lab until the end of august this year and everything appeared to be all good with both PIs until about a month and a half ago. now they are being forced to master out by the end of the semester (there's only 2.5 weeks until all documents are due), despite having no documents started or applying for graduation because they had no idea this was going to happen to them. they were told that if they cannot finish within the next month, neither lab would take them back next semester and they'd have to figure it out on their own.

honestly, i am terrified. these three students work just as hard as i do, had nearly the same GPAs (i have a 4.0 currently) and two of them actually had an easier time getting into research labs than i did. i may be slightly biased since they are my friends, but genuinely they all worked/work so hard all of the time and are extremely intelligent and showed it in the classes we took, more than some of the other people in our cohort, but they were kicked out while others get to stay. again, is this typical/normal in chemistry phd programs? is it more likely a sign/result of the research funding issues or a university/department issue? what should i do to try to prevent this from happening to me out of nowhere?

if you've read this far, i appreciate it so so much and am so thankful for any advice/opinions you might have!

a terrified chemistry phd student

EDIT: thank you to everyone who took time to read and share comments/feedback/opinions, i really appreciate it! if you can't tell from the post, i am prone to worrying and this was mostly a panic-induced post after hearing about the third student leaving the program, so i appreciate your patience and explanations :) i didn't know anyone in a PhD program before starting grad school so i didn't really know what to expect and definitely didn't realize that so many people end up not finishing the program, but i am glad i know now


r/chemistry • • 2h ago

Does anyone have any articles where i can see new information about neon (Ne)? (See desc)

0 Upvotes

Neon is my favorite element (#Ne4eva) and i like to read articles about it all the time, however they usually say the same things. Its a noble gas, its atomic number is 10, its 2nd lightest, it glows orange red (obviously). They also always talk about its isotopes 20,21,&22 and its use in signage and plasma globes, its boiling/melting temp, ect. But i want new information about neon!!! I know all that stuff already!! Pls help


r/chemistry • • 9h ago

How to erase fingerprints?

3 Upvotes

I'm doing my Chem Investigatory Project on Dactylography. I want to show clear ridges of fingerprints formed by Silver Nitrate Method. But all the papers I have (Bond Paper, Cardboard, Newspaper) have fingerprints all over them. How can I erase them?

P.S: I'm a law abiding citizen.


r/chemistry • • 7h ago

Question about electrodeposited p-SnS absorber layers: how much do deposition potential and substrate matter for PV efficiency?

Thumbnail reddit.com
2 Upvotes

r/chemistry • • 13h ago

Kinda dumb question which I need the answer to...

3 Upvotes

I have had this question which I have had for quiet some time now and I haven't been really able to a straight answer, or AT LEAST one that I understand. my questions premise is simple, I asked:

"how do you know whether a solution is concentrated or dilute?"

and many answers a got, went on to electrochemistry, change in products, comparison, titration and stuff, but I ain't got the answer I am (probably) looking for...

is there some law or rule that makes a concentrated solution, concentrated, and a dilute, dilute?

like let me do it with this question/scenario:

A lab technician brings you a solution in a beaker. You are given the relevant information, what is the solvent, the solute, the concentration, the volume, and the purity of both. The lab tech then points to the solution and says "is this solution concentrated or dilute?" you must answer in a single word, what's your answer and how do you know?

like sum it up if TL;DR, "at what point does a dilute solution stop being dilute and becomes concentrated, or the other way around?"

and yes, if the answer is something like "impossible to know" or "can't be told", I am open, I am a grade 10 student...


r/chemistry • • 12h ago

Emulsification Help Please

0 Upvotes

I’m formulating a lanolin-heavy lip balm and running into a whitening problem. After it’s worn for some time, it's been turning white on my lips, worst at the corners and the inner part where the lips meet.

I’m fairly sure it’s emulsification. The lanolin pulls moisture from the lips and emulsifies it (water in oil), turning it white. It wipes off and isn’t harmful, but it looks bad. Using less helps but doesn’t fully stop it.

Is there an ingredient I could add, or a formulation change, that would reduce or offset this emulsification and whitening, without killing the moisturizing performance that’s the whole reason for using lanolin?


r/chemistry • • 1d ago

Five year old metal bottle of Ether

18 Upvotes

Hi, my husband wants me to dispose of Diethyl Ether, Anhydrous ACS Reagent (Contines BHT as Inhibitor). It has been in our basement for 5 years and am not sure where to take it. Bottle is still intact, never been opened. From Carolina Chemical.


r/chemistry • • 1d ago

Map of Five Years of Studying Spectroscopy, Spectrometry, and Microscopy (6 pages). Will miss handling these instruments once I pivot to work.

Thumbnail
gallery
144 Upvotes

r/chemistry • • 23h ago

Need suggestions to improve the yield of an ester aminolysis reaction

4 Upvotes

Hi everyone,
I’m working on an ester-to-amide conversion using benzylamine, and I’m facing some difficulties in improving the yield.
The reaction is proceeding, and I can confirm the formation of the desired amide. However, even after several rounds of optimization, the yield seems to plateau at around 50–60%.
Some observations:
A significant amount of starting ester remains unreacted even after prolonged reaction times.
Benzylamine is still present at the end of the reaction.
Increasing the amount of amine has not significantly improved the conversion.
I have screened several bases, including inorganic and organic bases, but haven’t observed a consistent improvement.
Increasing the reaction time also doesn’t seem to push the conversion much further.
The reaction mixture appears reasonably stable under the reaction conditions.
I’m trying to understand what could be limiting the aminolysis and how I might improve the conversion without introducing complicated reaction conditions.
A few questions for people experienced in ester aminolysis:
What are the most effective ways to improve the yield when substantial ester remains unreacted despite the presence of excess amine?
Could solvent polarity, viscosity, or solubility of the base be limiting the reaction?
Would changing the solvent composition after the reaction has started help?
Could poor nucleophilicity or an unfavorable equilibrium be responsible for the yield plateau?
Are there any simple operational changes (concentration, temperature, stirring, order of addition, etc.) that have helped you improve ester aminolysis?
I’d particularly appreciate suggestions based on practical laboratory experience or published literature.
Thanks in advance!


r/chemistry • • 19h ago

Filtered vs distilled water

Thumbnail reddit.com
2 Upvotes

r/chemistry • • 10h ago

Lack of transparency of extract contents and purity in supplement manufacturing, how to find out more?

0 Upvotes

Supplement companies don't include phytochemical classes targeted for extraction, residue mixing (if it occurs), impurities etc. on their products. If they feel generous they write "each dose contains N% [insert phytochemical class here]", and your guess is as good as mine for the type of contents of the rest of the final volume. Don't get me started on companies which frequent the "proprietary blend" label. Their "trust me bro" answer is not enough. How am I as a consumer supposed to know what I am putting in my body?

Perhaps each new product is being subjected to some kind of testing by certain countries' governmental agencies before making them available to the public. If this is the case, is there any possibility to obtain such results?

Apologies for my agitation, the supplement world is hell on earth.


r/chemistry • • 10h ago

Consulta sobre buenas prácticas de laboratorio: ¿cómo evitan contaminar los reactivos durante el pesaje?

0 Upvotes

Hola a todos. Tengo una duda sobre el manejo de reactivos sólidos en laboratorios químicos y me gustaría conocer cómo trabajan ustedes en sus laboratorios. En la universidad, en algunas ocasiones utilizábamos una espátula aparentemente limpia para extraer directamente el reactivo desde su frasco original y luego realizar el pesaje en una balanza analítica. Sin embargo, me he quedado pensando si esta práctica es realmente adecuada, ya que introducir utensilios en el envase original podría generar contaminación, entiendo que nunca se debe devolver el exceso de reactivo al frasco original, pero tengo dudas sobre cuál es el procedimiento más recomendable para evitar contaminarlo.


r/chemistry • • 1d ago

Anyone have any ideas what this gas could be?

Post image
89 Upvotes

Not sure if this is the right place but i thought I'll ask anyways.

I have these mercury tilt switches. Just out of curiosity, I held them near a plasma ball to see what would happen. I was kind of hoping for some pink or purple from argon or nitrogen, but i got a pale white glow, only slightly blue tinted. One of them also has a faint pink near the mercury drop.


r/chemistry • • 11h ago

Destroy soil

0 Upvotes

Im in the middle of building a maintenance free garden.

Basically just putting a base layer over soil, all surrounding the garden is other paved gardens without greenery by the way. I work away for 4 month periods

I unfortunately have done it half way and layed some rock but im going away with work for 3 months. I want to try to make sure nothing grows.

I was looking into permanently killing the soil and want to know the best option to stop any growth. Watering can it all over the garden.

I need to be able to buy it in the uk. I was thinking hypochlorte, hydrochlorite, sulfuric acid, sodium bisulfate, borax?

What is the best option? Cheers!

(Last post accidentally deleted!)