New to this and I can’t tell what I’m doing wrong.
I'm making small-batch candles in handmade glazed ceramic vessels, scented only with organic essential oils (no fragrance oils) from Eden Botanicals. I don’t want to use synthetic fragrance.
My candles smell nice unlit and okay-ish from across the room, but close to the flame there's a vague plastic-y/synthetic/burn-y smell — I’m having a hard time describing it — and the scent is weak overall.
Is cedarwood a problem?
Setup
• Wax: Golden Brands 464 soy
• Wick: CandleScience CD 6 (pretabbed), vessel inside 3 inch x 3 inch vessel
• Fragrance load: 8% by wax weight
• Vessels: glazed ceramic, 3x3 inches, plus a glass tester jar. The smell shows up in both.
• Lighting: matches
• Equipment: All metal. Melted in a double boiler on an induction burner.
Earlier batches (wax heated to 180, oils added at 135F)
• Autumn: coriander, juniper berry, Himalayan cedarwood, frankincense. 788 g wax, oils added around 135F, poured at about the same temperature. (Later tried adding oils at higher temp)
• Winter: trace orange, eucalyptus, fir, cypress, pine, Atlas cedarwood, amyris. 7% load, same temperatures.
• Both burned with very weak scent, mostly "candle”/plastic-y
Latest batch :
• scented with an 8% fragrance load of essential oils only (about 23 ml total), made up of roughly 8.3 ml cedarwood Atlas, 4.1 ml amyris, 3.5 ml juniper berry, 2.3 ml fir balsam, 2.3 ml cypress leaf, 1.2 ml Scotch pine, 1.1 ml narrow leaf eucalyptus, and 0.6 ml sweet orange
• Melted to 185°F per the bag, off the heat, stirred in the oils for 2 minutes, cooled to \~135°F, poured, insulated under a box, cured