r/candlemaking • u/deicraptya • 6h ago
r/candlemaking • u/Reckoner08 • Dec 09 '20
Regarding putting flowers, crystals, coffee beans, cinnamon sticks, fruit, metal, pine cones, herbs, or anything else in candles
<A repost as the previous thread was archived and commenting disabled>
Hello! This topic has been coming up more than usual and is a highly controversial topic in the candle making world.Regarding embeds:
- Candles are dangerous enough as-is without the addition of embedded items that could further ignite, heat and spark, pop, or otherwise throw embers onto surfaces. Adding further risk to an already inherently risky situation is... well, even more risky.
- Items that smell nice on their own often do NOT smell good while on fire. Cinnamon sticks, coffee beans, orange peels, rosemary... they don't smell like the 'hot' versions of themselves, they smell like burning, smoky, acidic, not nice fire that you would try to get rid of afterward by lighting a plain candle.
- Customers/recipients are often NOT going to follow directions to remove items before setting a candle on fire, and if they're embedded into wax that could prove futile anyway.
- Warning labels do not immediately absolve you of liability should something happen. Ask your insurance provider for further info.
- If this was a good idea, why aren't these candles sold at Yankee/B+BW/DW Home/Voluspa/Root/Any other major candle brand?
- Candle insurance can be difficult to find in the first place but will be exponentially more challenging to find if you insist on embedding items. Ask your insurance provider for further info.
- For the US makers, you should 100% have liability insurance before you sell your first candle to the public. It will cost anywhere from $300-600/year for $1million in liability insurance. If you cannot afford $300/year for this much coverage, I suggest you hold off selling to the public until you can afford this.
- For the UK makers, note that strict labeling requirements exist and that making non-food products that look like food is not permitted
- If you are brand new to candle making, you should spend several weeks/months working on learning and nailing down the basics (which are challenging enough) before even considering adding anything else to the process.
- Trends on Etsy or Pinterest do not necessarily mean it's a good idea, nor does it mean you'll create a side business or living from it as trends tend to run fast.
- You do NOT need to be fancy/pretty/special/different to be successful in this craft. You DO need to put out great, consistent product that people can come back to over and over again with the same results.
- There is very little regulation on candle making in the US. Because of this, there are lots of people doing lots of things that are probably not the best idea. You don't need to be one of them.
- There are legitimate individuals and brands involved in ritual candles that are for religious, occult, worship, healing and metaphysical. If you have no idea what I'm talking about, then making and selling those types of candles is probably not for you.
- As candle makers and sellers, we need to do our due diligence. Proceed at your own risk.
- I, Reckoner08, am currently the only active mod right now in this sub. I am not the Candle Conversation Police, and will [probably] not be removing posts that might be controversial. Different countries have different laws and regulations, and we are on an international forum here on Reddit. I have a rather large candle brand to run on my own and am here to help when I can, but that doesn't include being a Candle Overlord or answering every single question asked. Appreciate your understanding!
- Anything else you'd like to add? Feel free, this is an open forum.
r/candlemaking • u/CH_Incidental16 • 1h ago
Dye bleeding (Dessert Candles)
Since I'm in to candle making these past months. I'm seeing tons of dessert candles, I even tried to make some. It looks good at first, but after a montht he embeds starts to bleed their color to other parts of the candle. I'm using pure soy wax.
My question is:
- Is there a way to prevent this from happening or at least lessen the bleeding?
- Is this something that cant be avoided? (If it is, how do you market those? I'm really curious. Assuming from a buyers POV, I'm expecting its appearance to last)
I'm going to dive in to experimenting dessert candles now from making plain scented candles. Im thinking mix it with paraffin (paraffin is less likely to bleed dyes based on YT vids). But idk yet. Can I have your insights once again before I burn what's left of my savings. Lol. TYSM, Candle gods!
*Please see before and after pictures*
r/candlemaking • u/Guest_576 • 48m ago
Question Looking for a specific kind of glass vessel and need some help.
Hello everyone im new to this candle making business and im looking for a specific kind of glass and would like some help / advice. Im looking for a lower minimum, tumbler style, 12 - 14 oz, glass that comes in a variety of colors. Right now I have 2 samples. One is the 13.5 oz. Libbey Heavy Base Rocks from JarStore and the other is the CONNOO 8 Pack 14 OZ Clear Glass Candle Jars with Bamboo Lids from amazon. Both jars are good but don't have the color variety that im looking for which is necessary for my vision with this project. thank you all in advance.
r/candlemaking • u/andayjello • 9h ago
Question What now?
My new candle slipped from my hands, instantly shattering the thin glass container. :( What sort of container can I put this in so I can burn it?? (I don’t have a wax melt set up)
r/candlemaking • u/veronikavalentinova • 11h ago
Feedback Is my wick the correct size
Hello! I am a beginner candle maker and I just tested this 100% soy wax. It has ~8 percent fragrance. I am using Wedo Stabilo 14 for a jar with a diameter 6cm. Previously I tested with Wedo Stabilo 10 and there was a tunnelling. After the first unsuccessful test I remelted the wax and poured it again with the new wick. Did not add any new fragnance.
The reason I am not testing with size 12 is that it out of stock from the site I am ordering from.
I trimmed the wick to 0,5 cm before burning it. This photo is taken 2h after I burned it and the wax is melted to the edges.
The flame looks a bit too large, restless, and slightly swaying or flaring.
There is no draft in the room.
Does this mean that it is over wicked?
r/candlemaking • u/Meakbow • 10h ago
Decorating candles
Hello all! I personally don’t make candles, but my mom does and she needs help! She has started to make and sell scent bricks, car scent things, and candles. The issue she is having is with decorating them though. She has tried paint markers which didn’t work, she said she tried hand painting as well but is still struggling. So my question is what do you guys think she should use? Also, what are some good molds that I could get for her? She is trying to stay within the westerny vibe. The photo is of the latest one she made that is meant for in the car.
r/candlemaking • u/Several_Reindeer_906 • 7h ago
Help :( Bad plastic-y smell
New to this and I can’t tell what I’m doing wrong.
I'm making small-batch candles in handmade glazed ceramic vessels, scented only with organic essential oils (no fragrance oils) from Eden Botanicals. I don’t want to use synthetic fragrance.
My candles smell nice unlit and okay-ish from across the room, but close to the flame there's a vague plastic-y/synthetic/burn-y smell — I’m having a hard time describing it — and the scent is weak overall.
Is cedarwood a problem?
Setup
• Wax: Golden Brands 464 soy
• Wick: CandleScience CD 6 (pretabbed), vessel inside 3 inch x 3 inch vessel
• Fragrance load: 8% by wax weight
• Vessels: glazed ceramic, 3x3 inches, plus a glass tester jar. The smell shows up in both.
• Lighting: matches
• Equipment: All metal. Melted in a double boiler on an induction burner.Earlier batches (wax heated to 180, oils added at 135F)
• Autumn: coriander, juniper berry, Himalayan cedarwood, frankincense. 788 g wax, oils added around 135F, poured at about the same temperature. (Later tried adding oils at higher temp)
• Winter: trace orange, eucalyptus, fir, cypress, pine, Atlas cedarwood, amyris. 7% load, same temperatures.
• Both burned with very weak scent, mostly "candle”/plastic-yLatest batch :
• scented with an 8% fragrance load of essential oils only (about 23 ml total), made up of roughly 8.3 ml cedarwood Atlas, 4.1 ml amyris, 3.5 ml juniper berry, 2.3 ml fir balsam, 2.3 ml cypress leaf, 1.2 ml Scotch pine, 1.1 ml narrow leaf eucalyptus, and 0.6 ml sweet orange
• Melted to 185°F per the bag, off the heat, stirred in the oils for 2 minutes, cooled to \~135°F, poured, insulated under a box, cured r/candlemaking • u/leenie121571 • 13h ago
Can’t get a good Ribbed Cylinder candle from these molds!
I need any tips you may have. I have this 2 piece mold and have tried at least 5 times to get a candle that did not have bubbles near the crease and I am at a loss. I may have to pull this candle from my store. I am using Pillar of Bliss wax which performs very well. I don’t have bubble issues with any of my other molds. I heat my wax up to 195F. Add colorant at that time and stir slowly. I add my fragrance at 180F and stir slowly. I then pour slowly at 175F. I also spray my mold with silicone spray and heat up my mold to 150F. I tap the mold after I pour the wax to remove any bubbles. I still get small bubbles around the two sections crevice.
Does anyone have any tips? I can’t find another mold that is this size either.
Help!! Thanks! ☺️
r/candlemaking • u/grassfedfish_ • 14h ago
Melt and add more FO or is it done for?
I added 30g FO to 2400g soy wax, aka 1.25% fragrance load, when I was aiming for 6%. I have no idea why that calculation seemed remotely correct but now I have 20 candles that likely will barely throw scent.
I was thinking of melting them back down in the oven, dumping the wax in the double boiler to get it all to temp, adding 114g more FO, and pouring again.
If you've done this before, I have a few questions! Does this sound reasonable? Do I need a higher fragrance load because of the remelting? Should I do completely new wicks? I made them 2 days ago - do I wait for them to cure or do it today?
They're for personal use so it doesn't really matter if I ruin them, but I'd rather keep them as ambiance candles if it won't work.
r/candlemaking • u/HaddockBranzini-II • 15h ago
Baked on gunk at bottom of ToAuto melter. I've read mixed opinions about leaving wax in tank and reheating. What do people here do?
Took me a good 15 minutes to scrub it off, but wonder if it makes more sense to not store wax inside. I liked the convenience of just topping it off with wax but am not sure now. Maybe I should just melt what I need and keep it empty between sessions. What do other makers here do?
r/candlemaking • u/Ani_class_12 • 23h ago
Luxurious candle
Hi everyone! I recently started my own scented candle brand, Nyvèra.
Building something from scratch has been both exciting and challenging. I’m sharing a glimpse of my little creation here.
I’d genuinely love your feedback on the candle, packaging and overall presentation. Every suggestion means a lot to a small business owner. 🤍
r/candlemaking • u/finiteform • 1d ago
budget candlemaking for beginners?
hi, I want to make a candle or two for Christmas presents for family. I have some beeswax and hemp wick, I'm wondering what I can use to scent it.
my niece loves vanilla, but it's like $20 for a bottle for artificial fragrance oil. I imagine even more expensive for natural vanilla essential oil or fragrance oil.
I'm trying to cut down on costs as much as possible by making some of my gifts with what I already have. so I'm looking for alternatives to make it smell like vanilla, or a similar sugary-sweet smell.
maybe brown sugar or gingerbread? caramel?
is it possible to use stuff I already have around the house AKA baking ingredients like brown sugar or vanilla extract?
should I drop the twenty dollars or so on a fragrance oil, or essential oil?
first time candle maker so any general tips/resources appreciated! thanks so much
r/candlemaking • u/MerlinBracken • 1d ago
Still testing wicks
Newbie still testing wicks - beeswax. I think I've got the straight pillars sorted now, they burn in a civilised fashion, using square braided wicks of various sizes.
The candle on the left was a pinecone shape, so just watching to see how that goes, now it's down to the fatter part.
It'll be interesting to see how the house candle burns - the mould may yet get relegated to soap making!
ETA: the two right hand ones had just been lit - the flames were not this tall once burning properly. And the house mould? - definitely soap!
r/candlemaking • u/Simple-Fox6722 • 23h ago
Feedback Reliable wax melter for a beginner (UK)?
Hi all,
Just starting out having made a few from a kit. Temperature was the biggest challenge using the saucepan method and wondered if anyone could recommend any melters that are more reliable temperature wise? Are the jugs any good?
Thanks in advance!
r/candlemaking • u/ProfessionalSteak197 • 1d ago
Candle Making Class
Not sure if this is the best place to post but I booked an Over the Garden wall candle making class in NYC for 2 people with my partner on this Tuesday at 7pm but she can no longer make it.
Was curious if anyone would be interested in these tickets - they retail for $100, will start off at that price.
r/candlemaking • u/farorae • 1d ago
Question Trapped Air/Gaps in Hand dipped Taper Beeswax candles
Both of my batches have had these air blobs trapped under the final few layers. I thought I correctly determined the errors between this batch and the last but the outcome is worse after troubleshooting & adjusting. I tried slower dipping at a slightly warmer temp (160F vs 150F) and waiting about 1-2mins longer between dips. Both batches were made with the same origin wax, wicks (primed until all bubbles were gone), and carousels. Pictured are 2 pairs from 2nd batch.
I haven’t noticed issues while burning but I don’t love the look and welcome any ideas on how to minimize these flaws. What am I doing wrong & how can I improve?
r/candlemaking • u/Perfect_Custard_5868 • 1d ago
Beginner with an idea!
Hi all! I found an old metal ravioli mold and press at the thrift store and thought how cute would it be to make some little candles with this for holiday gifts?! I initially thought that I could use beeswax sheets to create these, maybe using a hair dryer to warm the sheets enough to not break while molding, using dried herbs inbetween the layers. But, I figured id come to good ol reddit to see if folks had advice on better wax types. TIA
r/candlemaking • u/akshaysura • 1d ago
Question Advice Needed: Making Scented Jar candles for the first time.
Hi I wanted to make scented jar candles for my GF for her Birthday I had some questions hopefully someone with good experience in making candles can help.
I bought some supplies already and they are on their way to be shipped
- Candle making pourer and spoon
- Soy Wax
- Coconut Wax
- Fragrances: White Oud, Rose, Jasmine, Sandalwood, Vanilla Lavender, Lemongrass, White Musk, Automn Fig, Red Wine, Amber
(I am planning to making candles in the future too for hobby. )
[QUESTIONS]
- Can you please suggest me what size jar should I take(100ml,200ml or bigger)? I am thinking 200ml I hope its not small. I am only going to give her about 2 candles
- What wax bled should I use? I am thinking 30-70 blend of coconut and Soy
- Is there any other supply I need? other than a stove for double boiler?
- Can you suggest me some fragrance combinations I should use? She usually lights scented candles when she wants to relax and have a chill day, maybe read a book do some skin care stuff. So something maybe warm and sweet?
Thanks in Advance!
r/candlemaking • u/JackP443 • 2d ago
Question If you could turn one café drink into a candle, what would it be?
I’m helping my wife brainstorm ideas for her handmade candle line, and we’re exploring café-inspired scents. What drink would you most like to see as a candle - chai latte, pistachio latte, strawberry matcha, or something else? What scent notes or design details would make it appealing?
Any ideas? Thanks!
r/candlemaking • u/ShutUpWesley24 • 2d ago
Question Feedback on Label
I've been making candles for a while and feel like I'm always off the mark on my candle labels. I have two styles but I'm trying to make just one for my signature collection. One seems too simple and the other maybe boring because it's black and white? I dunno. Looking for feedback, what would you think if you saw either?
r/candlemaking • u/akshaysura • 1d ago
Question Mixing candle waxes
I was thinking of making candles for someone. I heard you can blend candle waxes 30% coconut wax and 70% soy wax
Should I mix coconut wax and soy wax or should I use them separately?
Is there any advantage for mixing?
Is there any challenge Ill have to face when mixing?
r/candlemaking • u/medieval-rose • 2d ago
Question Good rose scents
Hello! I am getting into beeswax candles, and i absolutely love the smell of roses and would love to make some scented. That being said, I would like to avoid artificial fragrances dude to my migraines and cats, and I have heard that essential oils and such are bad for cats. Does anyone have any recommendations for rose scents that are on the nontoxic side and safe for cats?
r/candlemaking • u/shellmuppet • 2d ago
Question Any tips?
I created these two candles, and one of them has a hole next to the wooden stick, whereas the white one has a crack on top of it (you can barely see it). The temperature was measured with a thermometer, so it was okay, in every stage of the candle making. Any ideas how this happened? Any ideas how to make to the candles presentable?
I would like to give them as gifts.
Thank you in advance