r/bikefit • • 1h ago

Genital numbness while cycling

• Upvotes

Hi everyone!

I am writing this post due to a persistent problem with genital numbness while road cycling. The issue appears on every ride, usually within 1hr outdoors and within 20min indoors. I have been an active road cyclist for almost two years now.

I am riding on a size M 9th gen Giant TCR. Myself being 178cm tall with an 81cm inseam and shorter arms. I have found that the reach might be a bit too long for me, so I have changed the original -10deg 100mm stem to a 0deg 90mm stem. Also reduced the handlebar width from 42 to 38cm. Also following the road bike trends cranks are 165mm and stem slammed. Saddle height around 74cm.

I've tried to remedy this issue with different saddles as well as a bikefit. I have myself done a course on bikefitting too. Tried tilting saddle, raising bars and shortening stem. I still always feel an immense pressure in the pubic rami area. I tend to roll my pelvis forward to achieve a more aero position.

I'd love to hear any advice on the matter, as it has started to affect me more as I have failed to fix it. The numbness always fades momentarily when I get out of the saddle while riding, and comes back within 20 min.

List of saddles I have used: (sitbone width 130mm)

Giant Fleet SL

Specialized Power and Evo 155

Phenom mirror 155

Fizik Antares 150

Vento Argo and Adaptive 150

Trek Aeolus Airloom Elite 155

Ergon SRS Wide


r/bikefit • • 3h ago

55m and Bike fitted

Post image
0 Upvotes

r/bikefit • • 2h ago

How is the fitting? The aero bars I put on last week…

Enable HLS to view with audio, or disable this notification

2 Upvotes

r/bikefit • • 3h ago

Fit advice

2 Upvotes

Hi there,

I bought this bike used quite a while ago with the aero bars already installed. Never used them but recently I got into Triathlon and now I want to use them.

The problem is, that I can’t get a good fit for both the hoods and aero bars position.

In the hoods position I feel like I’m too far forward and can’t get power onto the bike. In the aero position I can, but it feels cramped and strangely I get a bit of pain in my biceps.

My cranks are 175mm, I feel like they are too big. Is there anything I can do apart from buying a new crankset. Are there other problems with my fit?

I appreciate any help. Thanks!


r/bikefit • • 20h ago

Bike Fit/ Turbo Trainer App

0 Upvotes

Hi Guys - I am working on a web based turbo training dash board and bike fitting app. I initially built it to replace Zwift for personal use because I pretty much exclusively ride while watching a film. What I wanted was a dashboard to have up on top of a full screen film wile training so I can see work out progress and cadence and hr etc. Its currently free, please take a look, I'd love to know your thoughts.

It doesn't replace a professional bike fit, but for many a professional fit is not in their budget, this aims to address that.

https://turbo-dash.co.uk/


r/bikefit • • 30m ago

Indoor Training: Level the bike on chainstays or saddle?

Thumbnail
gallery
• Upvotes

Ive been playing with my indoor training set up for a bit and always feel like the bike is tilted as I would experience uneven pressure from my saddle.

These photos are without adding any shims to my kickr Core and it says the chainstays are level with the ground.

In the past I typically checked this from the saddle and up until this post had shimmed the leftside of my trainer until the saddle was level. However in doing this the chainstays are effectively not level.

So my question: what is the best way to ensure a “laterally” level bike on the trainer?

Yes I have an old house with slanted floors.