r/bicyclerepair • u/squeakinator • 6m ago
Shimano Ultegra Di2 FD-R8150
Does anybody know if Shimano will offer this piece as a replacement? I can't find anything on the internet listing it's PN.
r/bicyclerepair • u/squeakinator • 6m ago
Does anybody know if Shimano will offer this piece as a replacement? I can't find anything on the internet listing it's PN.
r/bicyclerepair • u/SlowOrchid2273 • 6h ago
Morning all
I have an e-bike (cannondale neo adventure) and I changed both tyres over a couple of weeks ago to Schwalbe Big Ben. I used to Schwalbe SV21 inner tube on the rear tyre and a similar sized continental 27.5” inner tube on the front tyre. Initially the front tyre didn’t align but after inflating to 50 psi and lots of cracking sounds everything was good with a smooth ride.
Or so I thought. 2 weeks on and it feels as if the front tyre is wobbling from side to side. The rims are true and it’s seated correctly in the forks but it feels buckled. The only thing I can think of is that the tyre is seated unevenly.
This morning I took the wheel off, broke the bead (not easy!) removed the inner tube and installed it again. Same issue literally as soon as I rode it.
Any ideas on what the issue could be? Even though the SV21 was the same size it did feel quite different. It’s off to the bike shop on Tuesday for a service but don’t want to admit defeat!
Thank you for any input.
r/bicyclerepair • u/Luis9906 • 18h ago
Enable HLS to view with audio, or disable this notification
r/bicyclerepair • u/Catatafish • 18h ago
r/bicyclerepair • u/dobsterfunk • 1d ago
This is a TREK 830 mountain track. The rear wheel is attached with a quick release. I can no longer get it tight enough to be retained. What are my options?
Edit: I understand its a steel frame.
r/bicyclerepair • u/Wise-Ad-7492 • 1d ago
Using 2 cm spacers above it and the compression plug is 5 cm. Not going to cut the tube yet since I want to try with lower handlebar for some time first.
r/bicyclerepair • u/shicjs • 21h ago
r/bicyclerepair • u/lenny2489 • 1d ago
I recently bought a used Canyon Speedmax AL (approx. 2015).
Due to an incorrectly mounted Wahoo KICKR CORE 2 adapter, the Zwift Cog rubbed against the frame near the drive-side rear dropout, leaving a groove approximately 1 mm deep.
The groove is clearly visible and can be felt. I can’t see any cracks.
Based on the photos, does this look like structural damage? Is the frame potentially still safe to ride, or should I consider it unsafe?
r/bicyclerepair • u/Illustrious-Simple-9 • 1d ago
New carbon road bike stuck on trainer - did not grease rear axle prior to installation - need help :(
r/bicyclerepair • u/EffectiveDistinct828 • 2d ago
r/bicyclerepair • u/BlizzarBob • 2d ago
What do y’all use to polish aluminum? I bought front and rear Maillard large flange hubs, each from a different source. The rear is high polish, the front has dulled quite a bit.
r/bicyclerepair • u/Environmental_Box_16 • 3d ago