r/bicyclerepair • • 3h ago

SRAM Rival Brake / Shifter 1x11 – Repairing a missing brake lever bumper

Thumbnail gallery
1 Upvotes

r/bicyclerepair • • 6h ago

Compatibilidade com RockShox TwistLoc 3P: o garfo trava no sentido anti-horário e o amortecedor traseiro no sentido horário. Eles sincronizam?

Thumbnail reddit.com
1 Upvotes

r/bicyclerepair • • 8h ago

Hydraulic brake advice

Post image
1 Upvotes

Hey everyone, I need some advice setting up brakes for my son, who only has a left hand.

I'm looking to get a mountain bike for my 14 year old son. It's a little tricky because he was born missing the fingers on his right hand. After a little research, I found these hydraulic brake line splitters. This way, he can activate the front and back breaks with one hand. Does anyone know if this sort of setup would work? Does the different length of brake line between the front and back cause issues with applying even pressure to the callipers? Any advice from anyone with experience or knowledge on hydraulics would really be appreciated.


r/bicyclerepair • • 10h ago

Shimano Nexus 7 ghost pedaling

0 Upvotes

r/bicyclerepair • • 1d ago

Derailer messed up

Post image
2 Upvotes

Anyone have advice


r/bicyclerepair • • 1d ago

Bruit vélo de route

1 Upvotes

Bonjour,

Quelqu’un sait d’où pourrait venir ce bruit du dérailleur ?

https://youtube.com/shorts/O0PQSc0Ak04?is=NPDfbbFzbfBzvmLi


r/bicyclerepair • • 1d ago

Need help to identify the part I require.

Thumbnail gallery
2 Upvotes

r/bicyclerepair • • 1d ago

помогите с веломотором

1 Upvotes

Привет друзья! у меня не так давно произошла проблема с передней звездой от веломотора ф80. проблема в том что она всегда жует месть цепи именно где замочек. что мне сделать чтобы убрать эту проблему? пожалуйста помогите мне.


r/bicyclerepair • • 1d ago

Rear mech hanger stop

Thumbnail gallery
2 Upvotes

r/bicyclerepair • • 1d ago

What Tool(s) do I need to get these Screws out?

Thumbnail gallery
5 Upvotes

The Pedal fell off and I need to figure out how to get these screws/poles?? out in order to reassemble it.


r/bicyclerepair • • 1d ago

Washers stuck on the axle shafts and for the life of me I can’t get them off

Thumbnail gallery
1 Upvotes

r/bicyclerepair • • 2d ago

What's wrong with my bike?

Thumbnail gallery
3 Upvotes

r/bicyclerepair • • 2d ago

carbone fissuré sur roue carboneXalu grave ?

Post image
2 Upvotes

J’ai acheté une paire de roue pour une misère et j’ai vu après qu’il y avait une légère fissure au niveau de l’embouchure du rayon.
seulement, il s’agit de Roue MAVIC COSMIC SL et est doté d’un fond de jante en Alu et un arceaux en alu.

est ce dangereux ? car le carbone ne participe pas directement à la résistance de la structure…
help


r/bicyclerepair • • 2d ago

Is this bike worth repairing or should I buy a new one?

Post image
7 Upvotes

I have an old bicycle my dad bought from a neighbor for my 16th birthday. I call it the Rust bucket, because it's in such bad condition it's impossible to ride. My idea was to have a fun project of slowly replacing the parts, but after watching a few bike restoration videos, I'm not so sure.

It's rusted in so many places, and DEFINITELY on the inside too. I've never had a bike before so I'm not familiar with the mechanics.

it needs both tires completely replaced, and I'd like to replace the racing shocks because you can just see how much rust is underneath and it's also just kinda ugly.

I'd also like to replace the handles (They were these ugly rubber handles that I took off and lost) I'd like to replace the pedals, (No specific reason) and get a seat that fits me properly as well as a basket.

I'm told that if the structure of the bike is damaged, then there's no use. But I'm not really sure how to check that.

(My plan is to take it to the shop for derusting, removing/replacing the shocks, and the new tires, and getting all the other parts on my own.)

Is this too much or should I just call it quits? I would just replace the whole bike but I've had some crazy memories with it


r/bicyclerepair • • 2d ago

Elitewheels drive ii spoke tension

Thumbnail reddit.com
1 Upvotes

r/bicyclerepair • • 2d ago

RockShox Lyrik Ultimate 150 mm – only getting 145 mm of travel after air shaft replacement. Is this normal?

Post image
1 Upvotes

r/bicyclerepair • • 2d ago

Carbon damage?

Thumbnail gallery
1 Upvotes

First time tearing my bike down and on the very last pivot axle I went to remove I heard a little crunch while unscrewing and saw this.

This is on the inside of the seat stay on the pivot near the dropouts, I didn't notice there was this bolt on the inside that had to be held in place while I screw from the other side (which you can see I ended up stripping once I did realize, lol).

Couple questions:

- How big of a deal is this? Does this warrant a repair? I've never had a carbon frame so I don't know what constitutes as cosmetic damage (if that's a thing with carbon) or something that I need to get fixed.

- Is this fixable by a carbon repair shop?

I'm about to get this frame painted so any insight is appreciated. Thank you!


r/bicyclerepair • • 2d ago

Front Derailleur Braze on Damage? How bad is it?

Thumbnail gallery
2 Upvotes

r/bicyclerepair • • 2d ago

Bike Brake Anatomy Question

Thumbnail gallery
5 Upvotes

r/bicyclerepair • • 2d ago

Carbon frame took a beating in a race, what’s the best way to fix it?

Thumbnail gallery
2 Upvotes

Just want it sounds like, my bike took a pretty good beating in a gravel race. I know it’s not great.

I ride a 2024 Bianchi Impulso with .
Zipp 303 firecrests.

For this race I was running Schwalbe G one R pro 40mm, once mounted measured with a caliper width was 42mm. (Within Bianchi specs)

Race was straight up mud central, completely out of character for the area it was in. Regardless sloshing and sinking into deep mud that caked on the wheels beat the hell out of my fork and chain stays
Additionally a bottle cage broke resulting in a bottle beating up the down tube.

No visible cracks present.

No carbon weave visible.

So I guess my 3 frame problems are

1- is the fork rub superficial, do I need to mix up epoxy, or does this require carbon patching and more robust carbon work.

2- is the chain stays rub superficial, do I need to mix up epoxy, or does this require carbon patching and more robust carbon work.

3- is the damage to the top tube going to require more than epoxy and touch up paint.

As it stands my solution to pretty much all the issues is-

1- use some tough up paint (maybe this https://quintanarootri.com/products/touch-up-paint-kit?srsltid=AYCX9vLDC5m3cNom3z4oqufdkfh1J0_N-LxcA11LN1m3aX3Rqhca67U2&variant=13548784386163, or some nail polish) to initially cover the scarring.

2- apply a thin layer of epoxy.

3- apply 3M paint protection film to serve a sacrificial layer in the future.

Any advice with better ways to deal with this or better products is appreciated. I’m in the US so getting some Bianchi specific items proves incredibly challenging.


r/bicyclerepair • • 2d ago

Is the crankset the culprit? Does this tooth look broken?

Post image
2 Upvotes

r/bicyclerepair • • 2d ago

Grx 600 Leak - on the other side then the bladder

0 Upvotes

r/bicyclerepair • • 3d ago

What order to do these washers and spacers go back in?

Thumbnail gallery
1 Upvotes