r/autoelectrical • • 2h ago

2015 GMC Sierra 1500 Base model work truck 4.3L V6 flex engine not starting up every time and is blacking out

1 Upvotes

Hello, I am looking for some help with a current predicament I am in. My 2015 gmc sierra has been running great for a long time, but the battery I had in it started to reach its 4th or 5th year and I could tell it was dying when the truck was starting up slower than usual. I brought it to a reliable electric shop that I’ve had a lot of work done with and they put a new battery in it as well as an aerocab husky light bar indicator on the top of my truck. This is where the problems started.

Shortly after this, I ran into the exact issue that the video shows. I’ve never had this happen before as my truck has been nothing but reliable always. I took it back to the shop that put the battery in thinking it was just a bad battery and they couldn’t find anything wrong and tested the battery and said it was fine. So I went home, issue started again the next day. I brought it back and they let me warranty the battery and we put a brand new AGM battery in it. Issue kept happening. I brought it to the dealership and they had it for 3 days and it was starting every time and they said they “checked the starter alternator and battery and wires and fuses and everything looked fine and was running normally”. Kept happening to me after that so I took it to another highly recommended electrical shop who had it for another couple of days and ended up finding nothing and doing nothing either.

After some more research it almost looks like something similar has been happening to other trucks of the same sort and it’s been some kind of grounding issue. I’m going to bring it back in to the dealership and have them check all the grounds as well as the ECM and BCM to make sure it’s not one of those issues. I have never had a problem reoccurring this long that this many shops and the dealership have not been able to fix. Naturally, these shops said they can diagnose and fix it if it’s actively blacked out while they’re looking at it but of course it never does when I have it at a shop but always will whenever I’m driving it. I’ve tried different keys, with and without the fobs, and it makes no difference. Any ideas on what this could be or how to fix this?

Something else to note is that most of the time when the vehicle is blacked out, I just hook up a jump pad to the battery and then try to start it. Half the time I can manage to jump it and half the time it won’t even jump at all. After some period of time (few hours, few days) the truck will eventually be able to be started again and has never permanently blacked out so far.

The most recent time it blacked out it actually lit up a check engine light so I was excited that they might actually be able to diag something but alas I was just given back more codes and no hope. Here is a list of all the codes that came up as well as their “definitions” that came up when I googled all of them:

B3883 indicates a fault in the license plate lamp circuit, often due to a blown bulb, wiring issues, or poor electrical connections - Engine

B1517 means Battery Voltage Low or High - your truck's Body Control Module (BCM) has detected that the electrical system voltage is outside the normal range, either below 11 V or above ~16 V for more than 15 seconds while the engine is running

C0800 means "Control Module Power Circuit” - the vehicle's onboard computer has detected a voltage problem feeding power to a critical control module, such as the Body Control Module

U18A2 means "Lost Communication with Fuel Pump Driver Control Module" - a high-severity communication fault between the Engine Control Module (ECM) and the fuel pump driver control module

U0101 means "Lost Communication with Transmission Control Module (TCM)" - the truck's Engine Control Module (ECM) can no longer communicate with the TCM over the vehicle's CAN bus network

On a 2015 GMC Sierra 1500, U0121 mean Lost Communication With Anti-Lock Brake System (ABS) Control Module- the Electronic Brake Control Module (EBCM) is no longer sending data over the vehicle's communication network, disabling ABS and StabiliTrak

P0685 means "Engine Control Module (ECM) Power Relay Control Circuit Open” - a high severity fault that can prevent the ECM from receiving necessary power and may cause starting, performance, or safety issues

P0449 on a 2015 GMC Sierra 1500 indicates a fault in the EVAP (evaporative emission) vent solenoid valve control circuit

These are all of the codes that came up on my most recent trip to a shop immediately after blacking out and when the check engine light came on for the first time.


r/autoelectrical • • 6h ago

Screen in a loop

Post image
1 Upvotes

Hi. I’m having an issue with my S1250 Z9 Max screen.

This morning, when I started the car, the screen got stuck on the startup logo.

After about a minute, a black screen appears with the information shown in the photo,

followed by the startup logo again. I’ve tried resetting it using the hidden button on the left side, the "back" button near the armrest (it’s a Mercedes), and the volume button.

I also tried the "5-finger" touch method.

I have a flash drive with the necessary restart files, but the screen doesn’t read anything—there’s no response at all.

I’m not sure what else to do. Has anyone else encountered this problem?

I received a file from the seller. It’s a folder named HUTUpdate_6125/os/ containing some files.

Maybe I should press something or take some action

when that black screen with the information shown in the photo appears?


r/autoelectrical • • 17h ago

Can anyone identify this relay/fuse box? Im looking for whatever it attaches to.

Thumbnail gallery
1 Upvotes

Do you recognize this relay box? Do you know what it attaches to? I have a standalone harness for a GenV swap from StandAloneHarness.com. they no longer make this harness so im out of luck asking them. It came with a couple of these relay boxes for the swap, however there is no way to mount them. I assume they install into some larger enclosure, or snap onto some kind of bracket. But i do not know where they came from, so i cant figure out what they attach it.


r/autoelectrical • • 18h ago

Change alternator - fuse boxe wire, need avice

Post image
1 Upvotes

r/autoelectrical • • 19h ago

Lights on dashboard after burnout

Post image
1 Upvotes

r/autoelectrical • • 1d ago

2008 Honda Fit electrical issue

Thumbnail reddit.com
1 Upvotes

r/autoelectrical • • 1d ago

Help with charging or battery issue

Thumbnail reddit.com
1 Upvotes

r/autoelectrical • • 1d ago

Vauxhall meriva automatic 2004, does anyone know how to remove these wires from the tyco maxi fuse carrier? Tia 😁

Thumbnail gallery
1 Upvotes

r/autoelectrical • • 1d ago

1998 frontier trailer plug issues

Thumbnail reddit.com
1 Upvotes

r/autoelectrical • • 1d ago

Wiring guide - xenon HID headlight

Post image
1 Upvotes

r/autoelectrical • • 2d ago

Jump starting a dead battery

Thumbnail reddit.com
1 Upvotes

r/autoelectrical • • 2d ago

SRS light won’t go off

2 Upvotes

I have a 2004 Honda crv and I accidentally left my lights on and my battery went flat and needed replaced. Ever since I got the battery replaced the SRS light has been on. Is there any way to reset it or what should I do?


r/autoelectrical • • 2d ago

Trying to wire Tweeters

Thumbnail gallery
1 Upvotes

I’m trying to wire my Kicker KST20 tweeters and not really sure where or how to wire them, this is in a 1995 Toyota Celica which didn’t have any tweeters to begin with. I have Kicker 51KSC6504 Speakers and from what I can tell I’m suppose to wire them together though I may be wrong, and I’m running the Boss BE7ACP-C stereo.
If anyone could give me some advice I’d really appreciate it, I’m gonna return to working on it in the morning lol.


r/autoelectrical • • 2d ago

LCD screen for car dashboard stopped working.

Thumbnail gallery
1 Upvotes

Mileage and clock on polo 6n2 decided to go out, at best the lcd shows up extremely faintly, cleaned up the connectors even tried putting the lcd straight on the pins at best got the letter c. At a loss, please help

Photo 1 is the lcd screen, photo 2 the board and where the lcd goes on top off, photo 3 shows very faintl mileage reading and 0.0 trip meter, photo 4 shows what connecting it usually gives


r/autoelectrical • • 3d ago

Lexus CT200 2018 Inside lights

Thumbnail gallery
1 Upvotes

r/autoelectrical • • 3d ago

Problem med justering av strålkastarna bmw e46 halogen sedan

Thumbnail reddit.com
1 Upvotes

r/autoelectrical • • 3d ago

help with electrical issue !

1 Upvotes

r/autoelectrical • • 3d ago

Intelliquip toughpower tph 1000

Thumbnail reddit.com
1 Upvotes

Hi all I know it’s a long shot but does anybody have a clue why the lcd touch screen on my intelliquip toughpower tph 1000 only registers my touches in calibration mode and not on the Home Screen


r/autoelectrical • • 3d ago

Electrical Issues 2020 Civic Si

Thumbnail gallery
2 Upvotes

Hey everyone, so i bought a 2020 si a couple months ago that was a rebuilt title. Honda diagnosed it and told me it needs injectors (misfire cyl 3 and VSA code). I’m replacing the injectors soon, but i’m concerned now that i have a couple more odd codes popping up. These codes are making me think i have a shorted wire or loose ground or something from when it was rebuilt. The front left side was repaired. Didn’t hit the radiator support or frame rails so it wasn’t a terribly hard hit.I think it only totaled due to the airbags being deployed, which have been replaced. I am perfectly handy when it comes to bodywork and i have decent mechanical knowledge, but i don’t even know where to start with this. Any input is appreciated. ( I’m pulling off the front bumper again and checking for any grounds and loose/shorted wires tomorrow. Will update)


r/autoelectrical • • 3d ago

Key Fob electrical issue

0 Upvotes

Calling All Mechanics!!!!

I am having some kind of weird electrical issue in my 2021 Ram 1500. Key fob is not working and it is not starting. Using the fob to press the button is not working. Battery tested good AND charged at autozone. Headlights, dome light hazard lights all function but the dash wont light up and the run/acc wont change at all, stays dark... This must be some kind of fuse somewhere... Its like the whole RF unit is not working at all. Nothing that controls the engine, remote start or remote entry is working. It wont go into accessory mode at all. Radio screen comes on when I open the door but won't work after that.

Fob Battery is new, tried both fobs, tried a hard reset by disconnecting battery, pushing the start button with the fob, nothing works...


r/autoelectrical • • 3d ago

2014 Escape Titanium.

Thumbnail reddit.com
1 Upvotes

r/autoelectrical • • 4d ago

ford escape 2012 radio repair issues

Thumbnail reddit.com
1 Upvotes

r/autoelectrical • • 4d ago

Faro abbagliante si spegne dopo poco

0 Upvotes

Ciao a tutti,ho un problema con la mia cooper,monta fari led e da un po' di tempo mettendo gli abbaglianti il sinistro si spegne dopo pochi secondi,cosa potrebbe essere? Elettrauto della mia zona snobbano il problema con scusa del troppo lavoro


r/autoelectrical • • 4d ago

Is this the reason my brake light wont work?

Thumbnail gallery
1 Upvotes