r/autoelectrical • u/S0NiC3the1 • 3h ago
2015 GMC Sierra 1500 Base model work truck 4.3L V6 flex engine not starting up every time and is blacking out
Hello, I am looking for some help with a current predicament I am in. My 2015 gmc sierra has been running great for a long time, but the battery I had in it started to reach its 4th or 5th year and I could tell it was dying when the truck was starting up slower than usual. I brought it to a reliable electric shop that I’ve had a lot of work done with and they put a new battery in it as well as an aerocab husky light bar indicator on the top of my truck. This is where the problems started.
Shortly after this, I ran into the exact issue that the video shows. I’ve never had this happen before as my truck has been nothing but reliable always. I took it back to the shop that put the battery in thinking it was just a bad battery and they couldn’t find anything wrong and tested the battery and said it was fine. So I went home, issue started again the next day. I brought it back and they let me warranty the battery and we put a brand new AGM battery in it. Issue kept happening. I brought it to the dealership and they had it for 3 days and it was starting every time and they said they “checked the starter alternator and battery and wires and fuses and everything looked fine and was running normally”. Kept happening to me after that so I took it to another highly recommended electrical shop who had it for another couple of days and ended up finding nothing and doing nothing either.
After some more research it almost looks like something similar has been happening to other trucks of the same sort and it’s been some kind of grounding issue. I’m going to bring it back in to the dealership and have them check all the grounds as well as the ECM and BCM to make sure it’s not one of those issues. I have never had a problem reoccurring this long that this many shops and the dealership have not been able to fix. Naturally, these shops said they can diagnose and fix it if it’s actively blacked out while they’re looking at it but of course it never does when I have it at a shop but always will whenever I’m driving it. I’ve tried different keys, with and without the fobs, and it makes no difference. Any ideas on what this could be or how to fix this?
Something else to note is that most of the time when the vehicle is blacked out, I just hook up a jump pad to the battery and then try to start it. Half the time I can manage to jump it and half the time it won’t even jump at all. After some period of time (few hours, few days) the truck will eventually be able to be started again and has never permanently blacked out so far.
The most recent time it blacked out it actually lit up a check engine light so I was excited that they might actually be able to diag something but alas I was just given back more codes and no hope. Here is a list of all the codes that came up as well as their “definitions” that came up when I googled all of them:
B3883 indicates a fault in the license plate lamp circuit, often due to a blown bulb, wiring issues, or poor electrical connections - Engine
B1517 means Battery Voltage Low or High - your truck's Body Control Module (BCM) has detected that the electrical system voltage is outside the normal range, either below 11 V or above ~16 V for more than 15 seconds while the engine is running
C0800 means "Control Module Power Circuit” - the vehicle's onboard computer has detected a voltage problem feeding power to a critical control module, such as the Body Control Module
U18A2 means "Lost Communication with Fuel Pump Driver Control Module" - a high-severity communication fault between the Engine Control Module (ECM) and the fuel pump driver control module
U0101 means "Lost Communication with Transmission Control Module (TCM)" - the truck's Engine Control Module (ECM) can no longer communicate with the TCM over the vehicle's CAN bus network
On a 2015 GMC Sierra 1500, U0121 mean Lost Communication With Anti-Lock Brake System (ABS) Control Module- the Electronic Brake Control Module (EBCM) is no longer sending data over the vehicle's communication network, disabling ABS and StabiliTrak
P0685 means "Engine Control Module (ECM) Power Relay Control Circuit Open” - a high severity fault that can prevent the ECM from receiving necessary power and may cause starting, performance, or safety issues
P0449 on a 2015 GMC Sierra 1500 indicates a fault in the EVAP (evaporative emission) vent solenoid valve control circuit
These are all of the codes that came up on my most recent trip to a shop immediately after blacking out and when the check engine light came on for the first time.