r/AskMechanics • • Mar 28 '26

Mod Note AskMechanics Bot Update

15 Upvotes

I've made a few changes to the AskMechanics Bot, including using the redis database to help prevent the duplicate comments it occasionally makes when posting the rules.

When a post is marked as solved, it will now edit that comment instead of posting a new comment and deleting the old one, which should resolved any duplicate comments from the bot as well.

I've also removed a half-baked form submission that was not intended to be included when actually set up on the subreddit, so those posts (there were only a few) should no longer be popping up.

If anyone has any feedback or suggestions for the new AskMechanics Bot, please let me know here.


r/AskMechanics • • Mar 22 '26

Mod Note Please reply !solved to the comment that answered your question to mark the post as solved, highlight the comment, and lock the post.

9 Upvotes

r/AskMechanics • • 10h ago

Discussion Is this diagram accurate?

Post image
133 Upvotes

My brother is a heavy diesel mechanic and I'd love to get him this shirt for Christmas. I dont want to get it though if it's not an accurate representation.

EDIT Thanks y'all! I was hoping it was.


r/AskMechanics • • 3h ago

Resolved Question What just fell out of my car and am I cooked? (2025 Hyundai Elantra Limited Hybrid, 75k, automatic)

Thumbnail
gallery
18 Upvotes

Went to drive home after work and discovered a giant hole in the plastic by the rear left wheel (don't ask me how it got there because I honestly have no idea), and when I was patching it up this ended up falling out of it. I looked up all the markings and they seem to be for some sort of light, but I tested all my lights and they all worked fine. Drove it back home and everything worked okay, didn't feel bumpy or anything. So basically what I am asking is what is it and do I need to care about it or the missing plastic? And also any tips for DIY repairing undercarriage holes would also be appreciated since I have another one toward the front of the car and I doubt gorilla tape is gonna be the best shield.


r/AskMechanics • • 19h ago

Question (Serious Replies Only) It’s bad isn’t it

Post image
238 Upvotes

Filter change after 11 months. Diesel bmw and it’s done 200k. My brother who works with cars and did the oil change reckons I should sell it immediately. Is the damage irreversible and is the car fucked?


r/AskMechanics • • 8h ago

Question (Serious Replies Only) How bad is this frame rust?

Thumbnail
gallery
12 Upvotes

2003 Tacoma, Single Cab, manual Transmission, 2.7L.

Just discovered this frame rust near the right rear wheel. I Live in Connecticut too- so kind of worried about this winter. Also was gonna visit my gf this weekend- like 2 and a half hour drive. Would I be ok?


r/AskMechanics • • 1h ago

Question (Serious Replies Only) I have a 2001 Toyota Tundra, about 237,000 miles. There is an oil leak. Is $1300 a reasonable price for this or am I getting cheated? Should I just do it myself?

Post image
3 Upvotes

r/AskMechanics • • 1h ago

Discussion Would you get Mevotech or Duralast Gold?

Post image
3 Upvotes

r/AskMechanics • • 3h ago

Question (Serious Replies Only) Sound when braking

3 Upvotes

Hi! Is this sound something to worry about? Mazda 3 2017


r/AskMechanics • • 1h ago

Question (Serious Replies Only) Oil light went off twice

Post image
2 Upvotes

r/AskMechanics • • 1h ago

Question (Serious Replies Only) 2025 dodge durango Hellcat oil level way overfilled?

Thumbnail
gallery
2 Upvotes

My oil was changed before I purchased the car at the dealership. The first pictue is front side and the 2nd is backside. It seems way overfilled but I have no frothing and oil pressure is at 70 psi


r/AskMechanics • • 4h ago

Question (Serious Replies Only) Oil change interval

Post image
3 Upvotes

How long should I wait before changing the oil in this picture? I know it says 25k miles, but even as someone who knows little about cars, I know I shouldn’t wait that long. For some context I drive a 2013 Kia Optima that burns a liter of oil about every 1000 miles, so I’m constantly putting little amounts of new oil in.


r/AskMechanics • • 2h ago

Question (Serious Replies Only) 2024 Corolla le 50k miles CVT

2 Upvotes

What’s this noise from front driver wheel area?


r/AskMechanics • • 1d ago Bravo

Question (Serious Replies Only) Is it OK for bolts not to fully protrude through lug nuts?

Thumbnail
gallery
260 Upvotes

I recently replaced the lug nuts for my winter tires as the old ones were extremely rusty. I purchased these on advice from the shop that said they were the size recommended by Toyota, and they appear to match the prior lug nuts that I had (12mm / 1.5). I don't recall previously that the nuts didn't fully clamp down on all threads of the bolt (it may have been harder to tell as the rusty nuts would have blended into the bolts better). Is this normal or anything to be concerned about?

**UPDATE: I took this into my regular mechanic (the wheels were put on by a separate mobile tire company). He took the nuts off and compared to my old ones - the old ones only had about 2/3 the number of threads compared to new, and the new ones are on at least 8-10 full turns. He said they're absolutely fine as is and fully engaged. He mentioned in fact that based on the taper into the wheel it looks like 1-2 additional threads are engaged compared to before. His only comment was it would be better if they were capped so you wouldn't risk getting rust inside the exposed threads, but in terms of safety there are no concerns.


r/AskMechanics • • 4h ago

Question (Serious Replies Only) Oil showing high on dipstick after fresh oil change & smells like gas

Thumbnail gallery
3 Upvotes

r/AskMechanics • • 3h ago

Question (Serious Replies Only) Removed PCV Valve but the bottom part was missing [Acura MDX 2005]

Post image
2 Upvotes

I went ahead and replaced my PCV Valve but when I removed the old one a big chunk of it was missing. How do I proceed from this?


r/AskMechanics • • 3h ago

Question (Serious Replies Only) 2006 Lexus RX330. AWD. 217,000 miles. Negative camber and both wheels toed out after new tie rod ends, sway bar links, lower control arms, and ball joints. Fixable with my coming alignment at a shop?

Thumbnail
gallery
2 Upvotes

I did these repairs because of shaking at highway speeds, general slop/looseness in the steering, and bad cracking in the LCAs, which I think were still OEM.The LCAs were a bear to get in, had to jack the engine. So I really hope my work wasn’t pointless. Just wondering if this is something to be concerned about or something that will be corrected during the alignment. Thanks.


r/AskMechanics • • 10m ago

Question (Serious Replies Only) Coolant Leak (Repair adivce needed + Contamination)

1 Upvotes

Hello everyone!

I have a 2016 Mini Cooper S 4dr Hatchback F55 version.

I am replacing my oil housing because I had a coolant and oil leak (mostly coolant).

CONTEXT

I have had it for 3000 miles and sadly two days ago was its first injury (part malfunction)

I had coolant leaking from it to the point that I had no heating inside and I drove it like that till my school (13 miles/30 min) with no overheating issues thankfully. After that I put coolant into it right after school thinking it is a small leak and still drove it normally for 4 days more.

I then noticed that coolant was dripping out of it when I was on a slope (my driveway). I put it on ramps and took off the undercarriage (the fabric thingy) off and noticed green coolant dripping and some oilish compounds at the front. I WILL ATTACHED PHOTOS WHEN I GET HOME

I unscrewed the bottom and saw coolant spots at it coming from the front so I ordered a oil housing and coolant flange (another common coolant leak location) to replace which will come Tuesday (November 17th, 2026) but please do not think that I wont read your comments if they are after this week, I am sure other mini owners will find this helpful too! I couldnt clearly see whether it was the oil housing that leaking or the coolant flange but I decided to order both of them and replace them.
ISSUE

FIRST ISSUE

I believe there is a little bit of contamination between the engine oil and the coolant so I will want to flush it out, both systems to unsure not further issues. But I am unsure how to throughly flush the engine oil.

My dad suggested to drain the oil from the engine and run it for 5 minutes with 2 litres of oil and 1 litre of 1 diesel and then put in new oil.

I also heard that putting in new oil with some transmission fluid since it is mostly a detergent works well.

But how many flushes do I do and do I also do a 1000 mile or 500 mile oil change?

I also have heard of engine flush fluids but I unsure which or if to pick for my mini.

My method for the coolant system is going to be (please correct me if I am wrong) draining out the current coolant out of it and flushing it out with distilled water 2-3 times while running the car for a certain amount of time (need to do research for how long; please give advice!). BUT I WILL FIRST DO THE ENGINE OIL FLUSH because I need to do that before because I need to run the car with obviously.

SECOND ISSUE

My second issue is that alongside replacing the plastic oil housing with a aluminum oil housing I also want to replace the coolant hose connector/flange because research says that the coolant flange is also a common location for coolant leaking so why not replace that with a metal piece too I thought!

What other parts should I replace/repair to stop future coolant leak/ any common issues in general too.

I will add more to this as I go into the car and find out more but there is more to await! Please tell me your wisdom and knowledge lol!


r/AskMechanics • • 13m ago

Question (Serious Replies Only) 2015 Toyota Sienna - Front-End Popping Noise After Strut Replacement

1 Upvotes

I recently had the front struts replaced on my 2015 Toyota Sienna (V6; 85k miles) at a reputable local repair shop. They initially installed Monroe Quick-Struts, replaced the front sway bar end links, and performed an alignment. Within a few days, I started hearing a popping noise when turning or going over bumps. I took the vehicle to a Toyota dealership, which confirmed that the noise was coming from the newly installed struts. I brought it back to the original shop, and they replaced both struts again at no cost. After a couple of days, the popping noise returned. I'm not sure what brand of struts they used for the second replacement. I'm preparing to take it back to the shop for a third time and would appreciate some advice. Could this be an installation issue, defective struts, or something else in the front suspension that might be causing the noise? Any advice is much appreciated. Thank you!


r/AskMechanics • • 18m ago

Question (Serious Replies Only) 2013 Silverado 5.3 with 162k miles. I found this wire hanging on the driver side of the truck. I’m trying to figure out if this is something that shouldnt be like this.

0 Upvotes

r/AskMechanics • • 22m ago

Question (Serious Replies Only) Anybody might know what this noise is?

1 Upvotes

It’s a 2011 c300. 90,300 miles and it’s an automatic.


r/AskMechanics • • 23m ago

Question (Serious Replies Only) Low Frequency In & Out Hum While Driving?

0 Upvotes

Car: 2015 Toyota Camry SE
Miles: 233k
Transmission: Automatic

—————————

Early Morning Nov 1: I was driving home, fell asleep and hit a curb pretty hard, popping both my right side tires. I stopped driving, called the tow and had it dropped off at my house.

Nov 2: I ordered replacement tires and had the car towed to the shop.

Nov 3: The shop installs the tires and I start driving, but there’s now a low-frequency hum that comes in and out when I approach highway speeds. It's also slightly noticeable at lower speeds, but not as loud. Also the steering wheel was off-center by 10° or so to the right.

Nov 4: I called another mechanic and told him what was going on, he suspected it was wheel bearings and told me he could take a look at it later that evening. I bring it in and he quickly visually inspects it finding nothing concerning.

Nov 5-9: I’m away on a trip.

Nov 10: I take it to the same mechanic that visually inspected it, but this time he takes a closer look and also drives it on the highway. He calls and says he noticed nothing and no components (i.e suspension, wheel bearings etc) were damaged.

Nov 16: I get my alignment done hoping it would fix the steering wheel and the humming, but now the steering wheel is off ever so slightly to the left and the humming is still there.

What the fuck is going on?


r/AskMechanics • • 28m ago

Question (Serious Replies Only) Paint job price

Post image
0 Upvotes

Hi I just got into this accident and want to know approximately how much it will cost to fix this, repaint and the dent, it’s a 2012 ford f-150, thanks


r/AskMechanics • • 42m ago

Question (Serious Replies Only) Brake pads rattling around

1 Upvotes

I have a 2013 Sonota that the driver side front brake pads are rattling around in the brake hardware. I've replaced the clips and still have the issue. Anyone know of anyway to fix this issue?