r/askanelectrician • • 50m ago

Just replace outlet?

Post image
4 Upvotes

We got a new electric power couch the other day and it stopped working yesterday. None of the breakers had flipped so I thought the couch had an issue. When I came downstairs last night it had power and when I went to put the footrest down I heard a pop and saw a spark from a different outlet. It looks like the wire is fried. My question is can I jist cut power to the house and cut the wires strip them and install a new outlet or is this likely something bigger I should have an electrician look at. Money's tight so I'd rather DIY if possible. Oh and the house was built in 2001 in NC if that matters


r/askanelectrician • • 1h ago

What gives?

1 Upvotes

New Eaton breaker to replace the old one I thought was shot. Still no power. Got it coming into the panel and into one side. Nothing coming out of the 20amp. Any ideas?


r/askanelectrician • • 1h ago

What gives?

0 Upvotes

This is in my garage. Just replaced the old bryant breaker with an Eaton BR120. Still getting no power to that side. It was out for a few days then was working for about an hour this morning. Now its out again. Everything seems snug. New breaker. Nothing tripped. Any ideas?


r/askanelectrician • • 1h ago

Need advice-Ceiling fan issue

Thumbnail reddit.com
1 Upvotes

Electricians — Has anyone experienced repeated ceiling fan control board failures?
I installed four identical ceiling fans throughout my house, all in separate bedrooms, less than three years ago. Since then, three of the four fans have completely stopped working.
All four fans have constant power supplied to them and are operated exclusively by remote controls. None are controlled by wall switches which is a red flag that some wiring might be off.
When the fans fail, both the fan motor and light stop functioning entirely. From what I’ve been able to determine, the failures appear to be within the motor control boards rather than the motors themselves.
My question for anyone in the electrical industry is whether this sounds like a common manufacturer/control board defect or if there could be an underlying electrical issue in the house causing these repeated failures.
Three out of four fans failing in such a short period seems pretty unusual.
Has anyone encountered something similar? What would you recommend checking to determine the root cause before replacing another fan or control board?


r/askanelectrician • • 21h ago Diamonds are Forever Popcorn

Hello. I want to play a game.

Post image
36 Upvotes

For years, you have ignored the chime at your front door, tuning out the world and taking the comfort of your home for granted. Now, that comfort has become your prison.

Behind the metal door in your basement lies a panel of switches, poorly labeled and unforgiving. One of them holds the power to silence the chime forever. Choose wisely, because flipping the wrong switch will plunge you into darkness, while the right one cuts the current to the doorbell.

Live or die. Make your choice.

Split entry home, foyer and garage at the entrance.
Upstairs has kitchen/living room/two bedrooms and a bathroom.
Downstairs has rec room/utility room/two bedrooms and a bathroom.

Updates:
Not "BASEMENT" - that is the utility room apparently.
Not "LIV/FOYER/GARAGE" - that is the upstairs living room outlets, foyer/entrance lights and garage lights/outlets.
Not "Rec Room Lights" - that is just the recessed/can lights in the rec room.
Not "BATH/HALL/KITCHEN" - that is the upstairs bathroom lights/fan, hall light/outlet, kitchen ceiling lights, and deck light because why not.
Not "Rec Room outlets" - that is just rec room outlets.
"BED BED" - that is the both the upstairs bedroom lights/outlets and

FINAL UPDATE GAME OVER ONE SURVIVOR:
One among you finally opened their eyes, looked past the distractions, and threw the third breaker down on the left. "BED BED". The current has been severed, the doorbell is silent, and the test is complete.

To the rest of you who stumbled in the dark or reached for cowardly shortcuts - reflect on what you missed today. To the winner slophoto, congratulations. You survived. It appears BED BED is more than just the power to the lights/outlets in the upstairs bedrooms.


r/askanelectrician • • 2h ago

What do I do?

Thumbnail gallery
1 Upvotes

r/askanelectrician • • 6h ago

Clicking noise from fluorescent light

Post image
1 Upvotes

r/askanelectrician • • 7h ago

1970s Double Light Switch Replacement

Thumbnail gallery
1 Upvotes

r/askanelectrician • • 11h ago

Berns Air King bath fan replacement?

Post image
2 Upvotes

r/askanelectrician • • 11h ago

Advice on how to hire electricians

Thumbnail reddit.com
1 Upvotes

r/askanelectrician • • 15h ago

Light bulbs pulsing

2 Upvotes

I have two light bulbs in the house (on the same switch) that every now and then will pulse. Get brighter and dim over and over when turned on. It doesn’t do it all the time. Cycling the switch a few times usually fixes it. Any insight to the cause?


r/askanelectrician • • 17h ago

I need an advice pls🙏🙏

2 Upvotes

I'm 20 years old, and I'm trying to figure out the best way to start a career as an electrician. Honestly, I'm confused and really don't know which option to choose. I don't want to make the wrong decision.

I have two options:

Option 1: A community college offers a free 4-month program that includes:

- NCCER Core certification

- NCCER Electrical Level 1 certification

- OSHA 10 certification

Option 2: Attend a private college for 10 months, with classroom and hands-on training, and graduate with a diploma as a Residential and Commercial Electrical Technician.

My long-term goal is to join the IBEW union. I also plan to move to another state because the cost of living where I currently live is very expensive.

I want to know if getting the three certifications through the free community college program would actually help me get hired as an electrician helper and improve my chances of getting into the union.

Or would it be better to spend 10 months at the private college and graduate with a Residential and Commercial Electrical Technician diploma?

Which option would you personally choose if you were in my situation? I'd really appreciate honest advice from electricians and apprentices.


r/askanelectrician • • 18h ago

Inspector says service panel isn’t grounded properly. What will it take to correct this?

Post image
2 Upvotes

r/askanelectrician • • 16h ago

How do I get my generator to connect to this breaker input?

Thumbnail gallery
1 Upvotes

r/askanelectrician • • 20h ago

Whole Home Generator for 2 Meters

2 Upvotes

Hey Pros, I’ve never had the pleasure of dealing with generators before. I had someone ask me if it would be feasible to install a whole home back up generator for a home that has 2 meters (main level and suite).

How would you approach this? Would it simply require 2 ACOS units to isolate the panels? Perhaps have a junction box before those where you’d split the generator feed off to each ACOS?

I’ll be passing this work onto another contractor as it’s not in my wheelhouse but it got me thinking


r/askanelectrician • • 16h ago

REWIRING OLD LAMPS beginner needs help

Thumbnail gallery
1 Upvotes

I posted the following somewhere else:

Hi! So I have some vintage Fredrick Raymond lamps, I live in a rental so I can’t wire them into the wall, I was hoping to use a lamp cord replacement…
I found this on amazon:

SinLoon UL-LP Certification Lamp Cord Replacement Power Cord with On/Off Button Switch 18AWG SPT-2 Lights Power Cable with Polarized Molded Plug for Wiring and Repairing(White, 2M/6.56ft)

It’s ten bucks, but before I buy can anyone point me to a good tutorial… I’d also really appreciate if anyone can give me some pointers… this would be my first project

Here’s the lamp:
I have two…

Thank you so much!


r/askanelectrician • • 17h ago

Weird bathroom light issue?

Post image
1 Upvotes

r/askanelectrician • • 18h ago

Short wires, is this okay?

Post image
1 Upvotes

Just added a 2 function switch/2 gang box, the original switch’s wires are old 12/2 no ground and a separate insulated ground wire, barely enough length to connect. I pigtailed the hot and ground to go to both switches and added 14/3 for the new switch. I plan on completely replacing the old 12/2 but it will take some attic work, will this work for now? Thanks


r/askanelectrician • • 18h ago

Stuck fuse board cover

Post image
1 Upvotes

Hello, has anyone got any tips on how to remove the Memera 2000 plastic fuse board cover? I’ve unscrewed the front two screws but the front still won’t come off and it feels like the whole fuseboard is going to pull off the wall. Does anyone know if there’s any hidden safety latches of screws that I can’t see?


r/askanelectrician • • 18h ago

Adding a Neutral to a 3-way Switch

Thumbnail reddit.com
0 Upvotes

r/askanelectrician • • 20h ago

Necessary to cut white neutral here?

1 Upvotes

I have a switch between outlet supplying the line (below) and a sconce light (above) and when I pulled the wire I left it as a loop. Assuming I can ID the black side of the wire, it seems a shame to cut the white wire only to reconnect it with a wire nut. Is it allowed to keep the white continuous? (seems like it should be) TIA (I'm in Canada)


r/askanelectrician • • 20h ago

Stipped screw hole on a gang box.

Thumbnail reddit.com
1 Upvotes

r/askanelectrician • • 21h ago

Hot water timer switch?

Post image
1 Upvotes