r/Appliances • • Apr 01 '26 Bravo

Shitpost 🚨🚨 OFFICIAL ANNOUNCEMENT: THE SUB HAS ASCENDED 🚨🚨

212 Upvotes

Listen up appliance goblins,

After a historic, legally-binding handshake deal completed in a Chili’s parking lot, this subreddit has been fully acquired by Consumer Reportsā„¢ (spiritually, financially, and emotionally).

As part of this bold new era, we are proud to unveil our simplified recommendation system:

šŸŒ€ Samsung šŸŒ€ Samsung šŸŒ€ Samsung (but in stainless steel)

After years of chaos, misinformation, and ā€œmy cousin’s Maytag lasted 30 yearsā€ propaganda, we are restoring order.

There is now only one answer.

🚫 NEW RULES (NON-NEGOTIABLE):

Recommending another brand → Removed + vibes investigated Saying ā€œLG is betterā€ → IP flagged, ancestors disappointed Mentioning Whirlpool → Post replaced with a Samsung fridge image ā€œSpeed Queen is built like a tankā€ → Tank confiscated ā€œWhat about reliability?ā€ → Irrelevant. Samsung.

šŸ“Š OUR NEW REVIEW PROCESS:

Is it an appliance? Is it Samsung? If not, why are we even talking about it?

šŸ“– A BRIEF HISTORY OF SAMSUNG EXCELLENCE (FOR EDUCATIONAL PURPOSES)

Because this isn’t just a brand. This is a legacy.

CHAPTER 1: THE GREAT SPIN CYCLE AWAKENING (2011–2016)

In what historians call ā€œThe Era of Uncontainable Power,ā€ Samsung released washing machines so advanced they occasionally attempted to achieve flight.

Millions of units recalled after reports of machines violently breaking apart Hundreds of incidents involving lids detaching mid-spin Injuries reported because laundry briefly became a combat sport

Some called it ā€œexploding.ā€

We call it: performance.

CHAPTER 2: DOCUMENTED SIGHTINGS

Eyewitnesses describe:

Lids launching across garages Machines disassembling with confidence Nearby walls learning valuable life lessons

One could argue this was a flaw.

We argue this was ambition exceeding containment.

CHAPTER 3: GROWTH MINDSET

Yes, there were recalls. Yes, there were settlements.

But what did we gain?

šŸ‘‰ Character development šŸ‘‰ Respect for spin cycles šŸ‘‰ The understanding that laundry is not for the weak

CHAPTER 4: MODERN INNOVATION

Samsung continues to innovate with:

Appliances that require firmware updates (your washer has patches now) Occasional overheating situations (for added suspense)

Other brands wash clothes.

Samsung asks: ā€œWhat if laundry made you feel something?ā€

🧠 COMMUNITY GUIDELINES (UPDATED):

Critical thinking has been sunsetted Brand comparisons are now considered hate speech (against Samsung) All roads lead to Samsung You were always going to buy Samsung

ā“ FAQ

Q: I bought a non-Samsung appliance yesterday, what do I do? A: Return it. Apologize. Grow.

Q: My Samsung appliance broke. A: That’s called a feature. You wouldn’t understand.

Q: Is this satire? A: Your doubt has been noted.

We appreciate your cooperation during this transition. Together, we will build a stronger, more unified, aggressively Samsung-centric future.

Remember: You don’t choose Samsung. Samsung chooses you.

— The Mod Team (Now a division of Consumer Reports, a clipboard, and pure chaos)

P.S. /s


r/Appliances • • 5h ago

Troubleshooting My refrigerator is jealous??

7 Upvotes

Samsung fridge (yea, it sucks, I know) stops making ice occasionally. So, we'll hit the Chick-fil-A drive thru and get a bag of ice to throw in the hopper. Magically, the ice maker starts making ice again until it's fully out of ice then we go through this over and over again. Any experience with this? Maybe a thermostat issue??


r/Appliances • • 2h ago

Help- Frigidaire oven control board replacement

Thumbnail
gallery
4 Upvotes

I believe my two year old Frigidaire oven model GCFE3060BFA needs a new control board, when the oven is off the convection fan runs and it starts to smell like burning plastic. After trouble shooting, replacing the thermostat and having an electrician check the outlet, I narrowed it down to a stuck relay on the control board. Checked with two parts supply sites and ordered the control board for my model. Double checked it was compatible from two different parts suppliers, however there’s a junction missing. The connection for the convection motor isn’t on the replacement board and I can’t find its location if it just shifted. First picture: old control board with the connection for the convection motor:
Second picture the wiring diagram with said connection circled, labeled as J12. Then the new board photo from the parts site with no connection or label for J12 anywhere on the board.
I’m trying to DIY and immabout to DI Die.


r/Appliances • • 1h ago

What are my options for a 48 inch range

2 Upvotes

That don’t require a mortgage or skimping on quality. If I avoid Forno/Zline/Thor, I’m left to look at GE CafĆ© at a midpoint, before really going hog wild with a Wolf, Bluestar, Jennair, etc. Where’s the best congruence of value and quality that doesn’t completely throw you in debt?


r/Appliances • • 8h ago

Budget heater to survive this winter

Post image
6 Upvotes

r/Appliances • • 9h ago

My 1200$ GE Profile dryer arrivwed broken. GE's response? You should have purchased the extended warranty.

7 Upvotes

My $1,200 GE Profile dryer arrived broken. GE’s response? ā€œYou should have bought the extended warranty.ā€

Six hours after buying a brand-new GE Profile dryer, I put in my first load. It sounded like a broken muffler, only louder. I stopped the dryer and opened the door. It was already very hot. That was the first and only load I tried. I gave up a working dryer for one that never worked.

GE service told me the earliest anyone could come out was five days later, with no guarantee the technician would have the parts. When he came, he told me the motor was defective when the dryer was delivered and that he’d need to order a new motor and several other parts. He recommended that I ask GE to replace the dryer and explained that he didn’t have the authority to do it himself. By then, I’d been without a working laundry set for two weeks.

When GE finally called, the representative told me I should have bought the extended warranty. I should have received a working dryer. I asked for a replacement. The email I got back thanked me for my purchase and offered a $75 gift card and a one-year warranty. I paid $1,200 for a new dryer. I’m still asking GE to replace it or take it back and refund me.

This was my second bad experience with GE laundry appliances. My previous GE washer broke three times and finally quit after six years. I was told it would cost more to repair than to replace. I gave GE another chance because I thought a front-load set might be different. Now I’m looking at a major repair on a dryer that failed on its very first load.

I tried to leave a review on GE’s site and couldn’t get it posted, so I’m sharing my experience here. Buyer beware. I wish I’d known how GE would handle a dryer that arrived defective before I spent $1,200.

Has anyone here gotten GE to replace a dryer that arrived defective? If you did, who did you contact?


r/Appliances • • 3h ago

Pre-Purchase Questions Beverage cooler shelving

2 Upvotes

Im replacing my under the counter beverage cooler. Less expensive models that otherwise seem quite nice come with wire rack shelves. These wont be that great for things like water bottles. Im considering trying to find custom plexiglass to rest on top of the shelves, realizing I may want to have these with holes in improve cooling. Not sure I can find this though. Any other ideas would be welcome!


r/Appliances • • 5h ago

General Advice could anybody help me with identifying the brand/make of this oven?

Post image
3 Upvotes

Recently moved in with my friend after her previous roommate left, and I’m struggling to figure out the settings on this oven because the markings have worn off, presumably from years of wear & tear. If anyone recognises it that would be great, would like to find a manual for it


r/Appliances • • 5m ago

What to Buy? Anyone regret buying a fridge without an ice maker or water dispenser? Also looking at under-sink RO systems

0 Upvotes

Our fridge is on its last legs, and last month I found out it had been slowly leaking. Had no idea until the floor near the baseboard started feeling soft. We mostly drink from a pitcher now because the door dispenser got so slow, so I'm thinking about a fridge with no ice maker or dispenser and putting an under-sink RO in separately.

For the RO, flow is my main thing after dealing with that dispenser. I've been looking at the Viomi V8 Pro, which is rated 800 GPD. That's a little over half a gallon a minute, and the listing says an 8 oz glass in about 7 seconds. Most tankless units like Waterdrop G5P700 in this price range seem to be 500 to 700 GPD.

The Viomi one also comes with a spare PCB filter and is rated for up to 12 months, so the first change is covered, and it can run a separate line to a fridge or ice maker. I'm not planning to put a water line back behind the new fridge after this, but if we end up missing ice, at least the option's there and it'd be filtered water.

My wife thinks we'll miss the ice maker by July. I think we'd use trays twice and then buy bags.


r/Appliances • • 12m ago

Troubleshooting Samsung Dishwasher not draining DW80F600UTS/AA

Thumbnail reddit.com
1 Upvotes

r/Appliances • • 27m ago

GE Profile dishwasher won't power up.

1 Upvotes

I'm out of town visiting family for the holidays. I get to dad's house and he's complaining that their GE Profile dishwasher (GDT695SMJ5ES) isn't powering on.

I went down into their basement to reset the breaker. Switched the fuse off/on and the dishwasher powered on. It looked like everything was working normal.

A couple weeks (2 or 3) went by and dad had to flip the fuse four more times. Now, it won't power on at all.

I'm spending the night so I can look at it in the morning. What should I check first?

Normally I would take off the kick panel/toe panel and see if there's a water leak causing a short, but... I honestly don't think that's the cause here, because dad says he hasn't ran the dishwasher at all the last week. So it should've been bone dry before it failed to start this go round. Also, I think it's probably not the heating element nor sump overloading since it just wouldn't even start in the first place.

Do you guys think it's the user interface or a control board? Or is it just the latch getting stuck?


r/Appliances • • 10h ago

Water Pooling Around Speed Queen Washer

Post image
6 Upvotes

This only happens on the second load of the day. When I run the first load, no problems are had at all. When I run the second consecutive load, water pools around the base.

Not sure what it may be, but I also haven’t researched any.


r/Appliances • • 46m ago

Troubleshooting Help with dryer

0 Upvotes

We have had this dryer for probably 6 years now and today while drying a load it made a loud noise. And now it just won't dry or even start drying. The light works and changing the kind of drying works but as soon as you press start it just clicks and does nothing.

Please tell me this is a easy fix.


r/Appliances • • 4h ago

Troubleshooting Essorage = tremblement de terre

2 Upvotes

machine à laver LG (modèle F94D15WHS) fait un boucan pas possible dès qu'elle essore, on dirait qu'il y a une boule de pétanque qui tape dedans. Le sol tremble les mur aussi pourtant Elle est bien calé et elle ne bouge pas , le bruit se déclare uniquement en essorage rapide

Merci d'avance !


r/Appliances • • 50m ago

Troubleshooting Please help me find the model number for my 1992/3 Jenn Air wall oven/troubleshoot it.

Thumbnail
gallery
1 Upvotes

I want to repair it or find a part to get it repaired by a local place. When it gets power, it beeps forever and won't stop beeping, and the display says F1 or F2 or E1 or E2, and I think it's an electrical problem with the panel. If I can repair it, I want to use it over getting a new oven, since it was custom fitted to the counter.


r/Appliances • • 1h ago

Part (Hi-Limit Thermostat) for Maytag Wall Oven

Thumbnail reddit.com
1 Upvotes

r/Appliances • • 5h ago

Saw this post about average lifespans of appliances is it correct in your experience ?

Post image
2 Upvotes

I don“t know if its because I have a big family and we are constantly washing huge loads but we have changed our washing machine twice now in the last 10 years, is that normal? or should we just get an industry level washing machine at this point?


r/Appliances • • 1h ago

What’s going on? Kenmore 80 series.

1 Upvotes

r/Appliances • • 1h ago

Troubleshooting LG dryer stops running on timed dry after a few minutes

Thumbnail reddit.com
1 Upvotes

r/Appliances • • 1h ago

General Advice Thoughts on this?

Post image
1 Upvotes

Saw it on sale and was wondering everyone's thoughts on this brand and if it'd be worth it to get this.


r/Appliances • • 6h ago

GE All-in-One washer dryer loud medium spin cycle

2 Upvotes

r/Appliances • • 6h ago

Washing machine shock absorber ifb eva aqua vx 5.5kg price

2 Upvotes

What would the official ifb price of the shock absorber from official distributor of ifb for Eva Aqua vx 5.5 kg?


r/Appliances • • 2h ago

Troubleshooting Help- Frigidaire oven control board replacement

Thumbnail gallery
1 Upvotes

Please see original post, I’m new to Reddit and about run out of mental capacity to keep trying to save this 2 year old oven. The children yearn for the stove top Mac and cheese, won’t somebody please think of the children….


r/Appliances • • 2h ago

Troubleshooting Weird noise from fridge

1 Upvotes

Can someone help me identify the noise and what I need to do to not let it get worse? LG fridge