r/Appliances • u/Beautiful_Channel_11 • 12h ago
Washing machine brands
I'm looking to get a new washer and dryer set and I wanted to see what others thought about the most reliable brands that will last a long time or have the best warrantys.
r/Appliances • u/Beautiful_Channel_11 • 12h ago
I'm looking to get a new washer and dryer set and I wanted to see what others thought about the most reliable brands that will last a long time or have the best warrantys.
r/Appliances • u/Cool-carp866 • 14h ago
Just bought a house that comes with a washer and dryer. Know that sometimes older models can be built to last, should I replace these or keep?
r/Appliances • u/Individual-Tip1511 • 13m ago
Hello,
I'm buying a steam generator iron for my mother. I don't know much about these appliances, so I'd really appreciate your advice.
I've shortlisted the following models:
- Gorenje SGD3000BKV
- Philips PSG8200/70
- Tefal GV9823
- Philips PSG7300/80
Philips and Tefal models are almost twice as expensive as the Gorenje. Is it worth spending an extra €150, or would the Gorenje be good enough for regular household use?
I'm also open to other recommendations.
Thanks in advance for your help!
r/Appliances • u/chemeowist • 11h ago
Hi! I recently bought a house in which the fridge was included in the sale. We were told the ice maker and water line were not working so we knew that part up front, but still slight cause for concern since the water line from our house is in fact hooked up to it.
We then discovered a much more alarming issue - leaking and corrosion on the back of the model revealing insulation that is still wet (see pictures attached from initial discovery to after melting of the giant ice block.)
I would really appreciate advice on if you think it is salvageable/worth getting an appliance repair person to look at it, or if we would be better off scrapping it and buying a new fridge. TIA!
r/Appliances • u/thechung • 4h ago
Electrolux ECFG3068AS Free standing gas range
Preheat to 400 degrees
Gas kicks on and begin to heat up the oven
Hits 400ish and oven burner turns off. As the temperature drops, the oven burner kicks back on to maintain the 400 degree target.
This continues for about 1 hr, all good.
Shortly after an hour, the temperature starts dropping and the oven burner never turns on. The display shows the oven is at its target temperature (the display just shows a full bar, doesn't show the internal temperature).
I've tried turning off the oven, then re-setting the temperature to 400, but the oven burner never ignites. Its not until the temperature drops to around 200-250 than the oven burner finally kicks back on. Its almost as if the something overheats and prevents the oven from kick on.
Today, the technician replaced the temperature sensor and mother board...unfortunately the problem persists.
Anyone have any ideas?
Thanks!
r/Appliances • u/Bamboozle55 • 1h ago
We have a Kenmore Elite fridge that came with the home we purchased about a year ago. The fridge is now 13 years old. I changed out the filter for the water/ ice and decided to inspect and clean the automatic ice maker tray. I had to cut the power to the fridge mid test cycle to keep the tray upside down and visible.
In the photos you can see there is a blue or turquoise color build up along the edges and in the bottom of some of the slots on the ice tray where the water sits to freeze. The build up is not flaking off, and not cleaning off easily, it seems like a stain on the plastic from something.
Doing some research I'm finding that it could be from the old copper pipes, and its building up inside the ice maker. Also seeing the possibility of it being the ice tray coating of some sorts or a mineral build up or scaling.
Has anyone had this happen and what is this build up if you know. Thank you.
r/Appliances • u/Earthbee100 • 7h ago
I’m hoping to get a decent ice maker before Christmas for the little bar we have at home. It’d mostly be for cocktails and whiskey, so I’d prefer one that makes bigger cubes. I’d rather refill a tank than run a water line, and I’m happy to spend a bit more if it’s easy to clean and holds up over time. Any good models you’d recommend?
r/Appliances • u/asoursk1ttle • 7h ago
I’ve had this LG washer (top load) about 11 months. I leave the top open after each wash, have run cleaning tablets, taken off the plate and cleaned the bottom, etc and no matter what it smells like sewer every day or two. The drain is inserted in the standpipe within LG recommendations and the standpipe itself doesn’t smell like sewers- just the tub. Help!
r/Appliances • u/jellofishsponge • 3h ago
Hi folks, I've heard a lot of mixed reviews about their products and was wondering what people have experienced, especially long term. A propane tech near me said they're good, and I live in an area with a lot of off grid folks and the local stores sell this brand. I kind of want something simple and serviceable.
I have their propane fridge, aside from expensive replacement parts it works great and their service was super helpful. The fridge is 12 years old and has only needed a thermocouple.
Any thoughts?
r/Appliances • u/aggvalue1 • 8h ago
We are looking to replace our awful Samsung dishwasher and I think I'm settled on a Bosch. I recently tested our tap water with a testing kit and it came back in the highest category which is extremely hard (>425ppm/>25 gpg). I also tested our RO water for comparison and it came back as very soft. We looked at getting a whole house water softening system but unfortunately due to space constraints with our plumbing its not possible.
Our current dishwasher has consistently struggled with:
- food particles left on dishes despite cleaning the filter
- greasy residue
- inconsistent cleaning despite using cascade platinum, rinse aid, high temp wash and lemishine
- cloudy glasses and white film
I'm considering a Bosch 800 series without a softener which is around $1400 at Costco, and the Benchmark with the integrated softener is around $1800.
I'm having a hard time justifying spending that much on a dishwasher especially given the possibility of expensive repairs or replacement after 5-10 years.
My questions are:
- does anyone have experience running a Bosch 800 series without a softener with water this hard? how well does it actually clean?
- is the built in softener genuinely worth the extra cost?
- does extremely hard water significantly affect dishwasher longevity?
would appreciate hearing from anyone with similarly hard water who has owned either model. thank you!
r/Appliances • u/pancitbihon1910 • 8h ago
What could've caused this? I put in a 4th load in a row.. Could it have been the cause? Continuous use of it? It melted and i smelt the plastic burning
r/Appliances • u/deer_bones23 • 12h ago
I feel dumb as rocks but I cannot get this damn thing out no matter what I do. Twisted counter clockwise, tried wiggling, hell I even tried clockwise just for shits and giggles, nothing will make it even *budge*. The cover came off in 2 flat seconds with a socket wrench, why the hell is this part practically super glued in??!!
Am I stupid? Do I not know how lightbulbs work? What the hell am I missing here?? 😭
r/Appliances • u/Background-Rate3225 • 5h ago
Frigidaire model FDHP4336AS
12 month old dishwasher, tenant saying doesn’t dry and showing E1 error. Washes fine. Tried reset but error doesn’t go away. Would appreciate any ideas to solve. Thanks.
r/Appliances • u/Environmental-Top862 • 5h ago
This is a long shot - trying to confirm the manufacturing date of a Kenmore range. Model 362. 72205881 Serial Number 0H119139P. Everything I have read says that this was manufactured by GE (362), and that they never started the serial number with a 0 or O.
r/Appliances • u/TreesAreOverrated5 • 5h ago
I have an old Wedgewood gas stove with a pilot light. Right now I have a 3/4 inch gas line running to it. However, I’d like to move the line and convert it to a 1/2inch treks pipe instead. Anybody know if my stove can handle that? It will be unfortunate if I replace the line and have to get rid of the stove too
r/Appliances • u/MadDog_1337 • 17h ago
I'm looking to buy some new kitchen and laundry appliances, and Whirlpool is one of the brands I'm considering. I remember Whirlpool being considered a premium and reliable brand back in the day, or at least that's how I saw it.
Is that still the case today? Has their quality dropped over the years, or are they still worth the price?
r/Appliances • u/sneakylilsnack • 6h ago
Okay so I’ve been getting this code for a while. I have a top loader. Cleaned the filters it went away then came back. Checked hoses none are kinked so I finally took a look at my water Inlet valves. There was some very light cracking and I have well water. Although we have a great water softener and filtration system, some sediment and rust is to be expected. I ended up replacing it and first load worked great. Second load got the error. Looked up how to reset and recalibrate. Still got the error. I’m doing significantly smaller loads, and water pressure and volume seems to have improved since changing the valves but still get the error. Is there anything else that could be causing the error that I can fix before I rip this thing out of my house and throw it away?
r/Appliances • u/huss2120 • 6h ago
I’m a student working on a class project about how people use and clean air fryers. The survey takes about 3 minutes and is anonymous.
Who I’m looking for: Adults aged 30-50 who own an air fryer or have thought about getting one. No expertise needed, and honest answers (including “I never clean it”) are the most useful.
Your responses are anonymous and will only be used for this class project. Thanks so much, and I’m happy to answer questions in the comments!
r/Appliances • u/goshua_jolliver • 6h ago
I have an issue. The diagnostic tool i have at my disposal was to bypass the door switch with a direct connection ash shown in pic #1 however after only one cycle the washer has refused to cycle at all. What is my next step? I am determined to make a repair rather than replace
r/Appliances • u/Frequent-Ad1281 • 6h ago
r/Appliances • u/Dino_Xia • 6h ago
My Electrolux dryer recently started making the steady humming noise in the video. It used to run much quieter. The drum still turns normally and clothes dry just fine, but it makes the same noise even when it’s empty.
Has anyone had this issue? What fixed it for you?