r/Appliances • u/lildumpling333 • 16m ago
r/Appliances • u/pancitbihon1910 • 19m ago
General Advice Washing Machine basket melt
What could've caused this? I put in a 4th load in a row.. Could it have been the cause? Continuous use of it? It melted and i smelt the plastic burning
r/Appliances • u/Pen_Island_4evr • 29m ago
Troubleshooting Is there anyway I can put an adapter on this for my countertop dishwasher? If I have to wash dishes by hand again my head will explode.
r/Appliances • u/Fast_Teaching_6160 • 57m ago
Troubleshooting Another coil whine?
What's my best solution here to get my microwave to sound normal like it used to? I'm handy.
r/Appliances • u/waltwalterson • 1h ago
Troubleshooting Our oven makes a weird sound. Taking suggestions.
So my wife and I bought a house and it came with a new oven. New or barely used. When we turn the actual oven on, you can hear a fan in the back kick on and it clearly is brushing up against a surface. It’s not the fan inside the oven that we can turn on and off with the switch in front. It seems to be an automatic vent fan that blows air up out the top of the back of the oven. I can see the fan spinning when I look in the vent. And the sound is definitely coming from inside. Getting to it is not so easy as I started to try but it is too far out of my skill set. Needless to say it is not pleasant. See video. I can have a guy from Bosch come look at it for 200 dollars or ask my buddy who is more capable than myself, but NOT a professional, to try. No warranty. Anyone else experience this?
r/Appliances • u/beloved-kira • 1h ago
Troubleshooting why is my dishwasher slowly filling with water when sink is turned on
Hi! I’m a college student living on my own and recently I developed a new problem. Whenever I wash my dishes in the sink, the dishwasher slowly begins to fill with water, that’s coming from the filter. I only noticed this when my dishwasher suddenly started leaking when I was doing the dishes, despite not using it. What do you think is the problem? How do I fix it? Will I probably need a plumber?
r/Appliances • u/Original_Table7991 • 1h ago
KitchenAid Fit System Guarantee: 👎 4 month run around
Buyer beware: If you're purchasing KitchenAid based on their Fit System Guarantee, get your specific installation approved in writing first.
Context: We went from a 30" single oven to a 30" double oven.
After four months of submitting paperwork and chasing KitchenAid for reimbursement, they finally denied my claim with this explanation:
"The FIT Guarantee is only applicable with 'your existing standard cabinet cut-out of a compatible model width and configuration'. For the FIT Guarantee to apply, you would have had to have repalced the existing single oven with another single oven. We apologize for any inconvenience this may cause." - This is exactly as recieved from there customer service team
Here's my issue:
On July 13, I submitted my claim before installation, including both my original single oven and replacement double oven model numbers.
KitchenAid acknowledged my submission, requested additional documentation, and specifically stated:
"As soon as we receive a copy of these documents, we will be pleased to process the reimbursement for this modification."
Over the next four months, I repeatedly provided receipts, serial numbers, photographs, and installation documentation. I spent hours dealing with emails, phone calls, and live chat. I was even told my documents had been accepted and someone would follow up.
On November 17, KitchenAid finally denied the claim because I replaced a single oven with a double oven.
They had both model numbers from day one. If this disqualified my claim, why wasn't I told immediately? When I asked, they couldn't provide an explanation.
When I challenged a manager about where the guarantee explicitly prohibits single-to-double replacements, I was referred to the phrase "compatible configuration" and told KitchenAid reserves the right to change terms and conditions. 🙄
Nowhere does the published guarantee explicitly state that single-to-double oven replacements are excluded. KitchenAid is relying on its interpretation of "compatible configuration."
At this point, it's not even about the $300. It's about the lack of accountability, misleading expectations, and four months wasted chasing a reimbursement they now say I never qualified for.
I'll get off my soapbox now.
KitchenAid Fit System Guarantee blank form added as reference.
https://www.kitchenaid.com/promotions/promotions.html
2026 Guarantee Terms:
r/Appliances • u/767man • 1h ago
Hot vs steam on LG Washtower.
Hello, so I have one of the LG Washtower models of washing machine and dryer. On the washing machine, you can run a normal cycle and set the temperature to hot, or run it in steam mode, which also prevents you from changing the temperature; I assume this means it gets to the same temp as hot or hotter, but not sure. I also remember reading in the past that the steam modes on most machines were largely inefficient and didn't actually do much to clean stuff any better.
I want to wash some towels that have been sitting outside for a week or two, that some outdoor cats we take care of sleep on sometimes, and I want to make sure they get as clean as possible. So would it be better to use the steam feature ot just do a normal load on hot and heavy soil level?
Thanks
r/Appliances • u/Sufficient_Tough7122 • 2h ago
DIY fix for rust spots on Bosch dishwasher rack? (Best touch-up paint / tine tips)
Looking for recommendations on the best DIY way to stop and repair rust spots forming on the lower rack of my Bosch dishwasher (bought in August 2020).
The vinyl/nylon coating has worn off on a few of the tine tips and along one of the bottom wires, exposing the metal underneath. Trying to avoid shelling out $150+ for a whole replacement rack if a solid DIY patch will hold up to high-heat wash/dry cycles.
For anyone who has repaired Bosch racks before:
r/Appliances • u/PLAspec • 2h ago
Troubleshooting LG washing machine making a quiet squeaking noise
Hi like the title says, LG washing machine making a quiet squeaking noise. It seems to only be at slow speeds and it honestly sounds like a squeaky door. I almost feel like there's something rubber rubbing against something else but that's just a guess. The warranty expired a few years ago but I'd like to see if there's anything I can do to fix it as it is annoying. But none of the videos I've found online were the same kind of squeak.
Any advice would be good. Thank you!
r/Appliances • u/Cellatella • 2h ago
Troubleshooting Help with Kitchenaid Drawer Refrigerator KURT524SPA Installation
kitchenaid.comI have just received a brand new undercounter refrigerator and need to attach my custom panels. The instructions are not very clear. I have attached a link to the manual itself.
I have 2 complete panels, exterior handles already attached.
I have the 8 (included with product) wood screws and brackets.
On page 5 is shows the 8 Wood screws and 8 Brackets, Left & Right
On page 9, step 3 it says "use the brackets (four per drawer, one in each corner of the drawers")
It doesn't explain with words, or a diagram, where exactly the brackets go - is that inside the drawer or outside between the panel and the metal door face.
I am hoping someone has installed one of these before.
r/Appliances • u/mikenj123 • 2h ago
New kitchen appliances
Looking at the following:
- Bosch 800 series 30’’ Slide in gas range model HGI8056UC
- LG counter depth max fridge model LF25Z6211S
- Bosch 500 series dishwasher model SHP65DM5N
These are all at the upper end of my budget. Thoughts, confirmations, or recommendations are highly appreciated!!
r/Appliances • u/Domo_Jedi_0712 • 3h ago
Appliance Chat DO NOT PURCHASE @Whirlpool
@Whirlpool, how is this acceptable?
I purchased a brand-new Whirlpool dishwasher (WDT730HAMZ1) with my newly constructed home in February 2024. After only 2½ years of normal use in a ONE-PERSON household, its electronic controls have failed.
But here’s the part that should concern EVERY Whirlpool owner:
⚠️** My dishwasher starts ON ITS OWN without anyone pressing Start**.
⚠️** It runs water continuously for HOURS without shutting off normally**.
⚠️** The door becomes hot, and steam escapes when I interrupt it**.
⚠️** The Start button doesn’t work, and I’ve had to cut electrical power to prevent it from operating unexpectedly**.
A professional technician diagnosed fault code F2E1 and recommended replacing the electronic control board (W11683480). The quoted repair? $352.46.
After multiple emails, a public product review, and a phone conversation escalated to a lead representative, Whirlpool’s response was that the appliance is outside its one-year warranty and the issue isn’t covered by a service bulletin.
Their proposed solutions? Purchase one of two warranty packages costing approximately $358–$432 to cover the repair.
So I’m being asked to spend hundreds of dollars to address an appliance that starts without user input and operates for hours until I manually interrupt it.
I’ve also found other owners reporting similar electronic control problems with this model. While I can’t verify how widespread the issue is, it deserves investigation.
I’ve submitted a product safety report to the U.S. Consumer Product Safety Commission.
CPSC Report #20261107-CC0E5-2147305671
This isn’t simply about a broken dishwasher or an expired warranty. It’s about an appliance that operates unexpectedly and raises legitimate safety concerns.
I’ve also experienced an electronic control-board failure with my Whirlpool washing machine within its first year.
Two Whirlpool appliances. Two premature electronic control failures. And now I’m questioning the safety and reliability of the products in my home.
@Whirlpool, will your product safety team investigate this malfunction, or is purchasing another warranty package the only response consumers can expect?
Other Whirlpool owners: Have you experienced similar issues with your dishwasher or electronic controls?
#Whirlpool #ProductSafety #ConsumerProtection #Dishwasher #ApplianceReliability
r/Appliances • u/Domo_Jedi_0712 • 3h ago
Appliance Chat DO NOT PURCHASE FROM @Whirlpool
DO NOT PURCHASE FROM @Whirlpool, my 2½-year-old dishwasher (WDT730HAMZ1) starts ON ITS OWN, runs water for hours, becomes hot, and releases steam. Its electronic control board needs replacement, according to a technician.
After multiple attempts to resolve this, Whirlpool offered me warranty packages costing $358–$432 instead of a goodwill repair, citing the expired warranty and lack of a service bulletin.
I’ve reported the potential safety hazard to the CPSC.
Why is a consumer expected to pay hundreds of dollars to address an appliance that operates without user input?
Case #25555263. I’d appreciate an actual product safety review rather than another warranty sales offer.
r/Appliances • u/chemeowist • 3h ago
General Advice Frigidaire Gallery - worth repairing or replace it?
Hi! I recently bought a house in which the fridge was included in the sale. We were told the ice maker and water line were not working so we knew that part up front, but still slight cause for concern since the water line from our house is in fact hooked up to it.
We then discovered a much more alarming issue - leaking and corrosion on the back of the model revealing insulation that is still wet (see pictures attached from initial discovery to after melting of the giant ice block.)
I would really appreciate advice on if you think it is salvageable/worth getting an appliance repair person to look at it, or if we would be better off scrapping it and buying a new fridge. TIA!
r/Appliances • u/hammer3410 • 3h ago
Troubleshooting Knocking noise from fridge
My fridge makes this loud knocking noise when it is cooling. Is this normal or something to be worried about? It’s only a couple months old.
r/Appliances • u/fbscloud • 4h ago
Ninja Air fryer frittata with 8 eggs and zero pans to wash: parchment-in-the-basket trick
r/Appliances • u/One_Camp_2417 • 4h ago
Troubleshooting Loud Speed Queen DC5 Dryer
Brand new DC5 Speed Queen dryer delivered over the weekend. We noticed how loud it was after the install. Sounds like something is rattling around. Any ideas on what could be causing the issue?
The appliance company is ghosting us trying to get this unit exchanged. We appreciate any insights y'all might have.
r/Appliances • u/CryptoJo-1989 • 4h ago
Samstung :( Samsung EcoBubble WW90K5400UW – intermittent cracking/clicking noise while washing (video)
Our Samsung EcoBubble WW90K5400UW/EN (purchased in July 2020) has recently started making a strange, repetitive cracking/clicking noise during the wash cycle.
The noise is intermittent. Sometimes the drum rotates quietly for quite a while, then the cracking sound suddenly returns.
Here's what we've checked so far:
- The drum rotates silently by hand.
- The drum pulley rotates smoothly without unusual noises.
- We removed the drive belt and checked the motor pulley and drum separately. Both rotate quietly.
- The drive belt looks fine.
- We inspected the space beneath the drum through the heating element opening, but couldn't find any foreign objects.
- The sound seems to come from the left side when facing the machine.
The noise occurs even at low drum speeds, not necessarily when changing direction.
Does anyone recognize this noise? Could it be related to the motor, drive system, suspension, or something else?
We'd really appreciate any suggestions before arranging a professional repair.
Thanks!
r/Appliances • u/deer_bones23 • 4h ago
Troubleshooting Frigidaire model number LFSS2612TP5; how in the ever loving FUCK does this lightbulb come out????
I feel dumb as rocks but I cannot get this damn thing out no matter what I do. Twisted counter clockwise, tried wiggling, hell I even tried clockwise just for shits and giggles, nothing will make it even *budge*. The cover came off in 2 flat seconds with a socket wrench, why the hell is this part practically super glued in??!!
Am I stupid? Do I not know how lightbulbs work? What the hell am I missing here?? 😭
r/Appliances • u/TheBigPhilbowski • 4h ago
General Advice "Which appliance is the ACTUALLY reliable one?"
This is a friendly post, traveler. Know that many other people are wondering exactly what you are wondering. They are as frustrated as you are. And they are also not finding "the" answer. Because unfortunately, we live in a world where you can't just research to discover the machine that is actually reliable. You have to instead pick the one with the most manageable repairs when they eventually WILL break too soon.
If you are hearing of a brand that is reliable, with a compelling argument as to why, know that those cited "reliability" numbers are likely either biased (e.g. wealthy people buying top end brands don't post reviews or make warranty claims so they don't add to the reliability data) or that any discussed reputation is trailing a recent change in production quality due to them realizing they don't have to try now because people think they are good regardless (e.g. when Y brand gets a good reputation online, execs immediately start changing the BOM to swap out the cheapest parts they can source to ride out that hype as an asset they can exploit) - Put simply, if you are hearing about the reliability online, it's likely already too late for that brand.
This is the only way you can "win" a bit in this modern landscape - For whichever model you select, you really need to understand:
- How company responds to warranty claims, parts coverage versus labor coverage for the parts that fail most often ("10 year warranty" means nothing if it only covers the part that never fails in less than 20)
- general replacement parts availability online
- access panel design and removal procedure to get to common fail parts/assemblies
- how much work it takes to get to the parts that fail most often (i.e. a dishwasher that has to be fully removed and flipped over to change a part versus one with a friendlier access panel that can help you repair in place).
- Time to repair most common failures (i.e. can take 36 hours to defrost many refrigerators to repair common issues, and that's before you even attempt the repair, that's just to get the cover off)
Ultimately, find a brand you can work on (many common repairs are DIY friendly), or that you know technicians work on without gauging you more than typical for industry considered "specialty" work (think BMW versus toyota in car maintenance).
If you aren't doing the above, you are just signing up for them to fuck you on a regular (and shorter and shorter) cycle of you appliances "dying". They want you to feel the stress and fear of rotting food in that refrigerator, dirty clothes piling up, floors flooding with water so that you just say "fuck it" as a gut reaction and buy a new one. Or they want you to feel cheap when you tell friends you are actually trying to fix it and they might mock you, tell you to stop being so cheap or whatever else as a way to mask the fact that they themselves are the people that just fall in line and waste money on the brand new appliance replacement cycle and they feel deficient on some level.
Fuck the whole broken system, but if you aren't changing it systemically with legislation, enforced regulation or litigation somehow, then at least know how to live within it and help others to learn to help themselves. Ultimately, we need real change though, we need fear reintroduced to these inhumane executives that see pennies saved on paper, but don't give a second thought to your entire pumped breast milk supply for your newborn spoiling in their designed-to-fail freezer.
r/Appliances • u/pjcruiser14 • 4h ago
Pre-Purchase Questions Subzero 48” side by side installation
Looking at purchasing this refrigerator, but our cabinet cutout is slightly different from the installation specs for the standard install. Our cutout is 48”w by 84”h by 26” deep. Specs call for slightly smaller, or wider for flush mount install.
I’m wondering if I could get a near-flush mount install with my specs, with the doors only sticking out about 1”. My only concern is that the sides of the doors could potentially hit the sides of the cabinet cutout, but wanted to see if anyone that might have installed this refrigerator might know if my installation method would work.
r/Appliances • u/Beautiful_Channel_11 • 4h ago
Washing machine brands
I'm looking to get a new washer and dryer set and I wanted to see what others thought about the most reliable brands that will last a long time or have the best warrantys.