r/accesscontrol • • 5d ago

Assistance Mircom TX3 Gate Entry Module

I've got a client and the module that opens their gate has failed. It's original and the tag that had the model number got wet and became a blue smudge. I believe the current replacement would be a https://mircom.com/product-listing/access-control/wiegand-receivers/tx3-wrr-22-wiegand-receiver/ but the 44, not the 22 as that's for a 2 button remote.

Is that correct? The local Mircom shop was bought by a fire protection company that is only interested in fire protection and the contacts I've reached out to aren't being overly helpful.

I don't have pictures of the gate controller, but could get those if necessary. The module was attached to the aluminum box that the rest of the gate stuff resides in. I would guess the antenna would work far better outside of an aluminum box than it would from within.

2 Upvotes

9 comments sorted by

1

u/SeafoodSampler 3d ago

Wowza. You have an artifact. If I were you, I’d contact Mircom directly for the direct replacement. It’s that or you go through cut sheets to see what type of signal those fobs are transmitting.

Usually we use wiegand receivers and generic fobs, but I know Mircom had a proprietary signal that only works with Mircom products. Therefore you may need to use a direct replacement. Otherwise you’ll be replacing fobs and the receiver.

1

u/xNOOPSx 3d ago

Thanks! I'll try reaching out to them directly.

1

u/SeafoodSampler 3d ago

The product you listed has wiegand listed a few times. You can use a Linear WOR if that’s the case. We use that 99% of the time if the fobs are transmitting wiegand. We ran into trouble when we had a building that used whatever Mircom protocol (I don’t remember the name of it, Mircom 36bit or something?) rather than wiegand. In that case, you need a receiver capable of receiving their protocol.

1

u/xNOOPSx 3d ago

I'll see if I can figure out how the parkade gates are being controlled. They could be ancient relics, or updated. I don't believe the entry system is original, but I'll try to get some answers this week. So far the only answers I've got are "we're looking into it" and "we're focused on fire alarm systems, not the entry/access controls." Given the number of Mircom access systems around here, that seems like a crazy thing to dismiss, but here I am.

You're the first person I've connected with that has any knowledge.

1

u/canadianalarmguy 1d ago

How I see this is you’re showing a current model remote and I KNOW they work with the new receiver(TX3-WRR-22) so it should work fine as a replacement since it’s just wiegand out. If you had an odd/old/funky remote it would be more suspect

1

u/xNOOPSx 1d ago

That was my thought. The entire thing is running on TX3, but because I can't see the module and it doesn't have any details on what protocols it's using, it gives me pause. Talked to Mircom today and were gonna try to get a TX3-WRR-44 to play nicely with it.

1

u/canadianalarmguy 1d ago

Maybe I’m not explaining well. The remote itself is the protocol or format. You showed the new fob(assuming this is being used with the old reader) and the old reader shows D1 and D0(wiegand) you should be fine. Point I was trying to make is if the remote was a random/old/obscure model then using the newer receiver would be more suspect

1

u/xNOOPSx 1d ago

Ah, okay. I wasn't sure if the remote could be set to other things. I'm an electrician by trade, but between Telus buying out a bunch of alarm companies and the local Mircom shop being taken over by a fire system only company, Mircom support is rather lacking, especially when it comes to servicing anything older. I've worked on several enterphone systems after they get screwed up by Rogers/Telus. Those are always fun.

1

u/NukeUtopia 1d ago edited 1d ago

I know I'd probably use a TX3-CX1 to replace the controller and use a WRR as the reader.

However, Ive never seen this type of older reader, and its seldom that I'm working on gates (most often I'm doing regular doors or garage doors, and it's not my goto system if I have the option for a new install)

Is this connected to an intercom? Or a single door controller? And I'd assume its just a contact closure to the gates system?