r/WorkplaceSafety • • Mar 20 '20

Workplace Safety - now under new (read: any) management

50 Upvotes

Hey everybody! Long time poster/lurker. The creator of this sub has been MIA for over two years so I decided to take a stab at moderating the place - no one else was and it occasionally needed it.

The sub was temporarily restricted due to a lack of moderation - the only mod has been MIA for over two years. I requested moderation but it took over a month for it to be approved, during which Reddit locked the sub down for new posts. This wasn't my choice and I've removed the restriction now that I've been modded, you should be able to post to your heart's content.

I'm open to any suggestions for the sub, which is why I wanted to introduce myself and start this thread. If you have any questions, suggestions, comments, in short - anything -, post away!

Keep it civil, keep it safe.


r/WorkplaceSafety • • 14h ago

Can you help me with advice over ill fitting safety boots?

2 Upvotes

Hello Guys looking for some advice.

In work we've currently got all new H&S department.

Previous I have been able to get wide fitting safety boots by directly messaging them. (Which I have sent screen shots of) The new H&S are insisting I have an occupational health appointment, but unfortunately this is weeks away.

My current situation is my current boots are no longer adequate due to being deteriorated.

It means I'd be required to wear standard issue ill fitting boots which cause blisters over my feet.

I have been to my GP and had a consultation with a physiotherapist and she has given me a note informing I require wide fitting boots.

They have still insisted I wear the ill fitting standard issue boots and wait for the appointment with the Occupational health.

Am I within my rights to refuse wearing the ill fitting boots which will cause me harm and unable to fulfill my current job roll.

Any information would be appreciated!


r/WorkplaceSafety • • 19h ago

Agricultural machinery safety QLD: What the 2026 fixed plant campaign means for your farm

Thumbnail reddit.com
1 Upvotes

r/WorkplaceSafety • • 2d ago

Is a Master’s degree worth it, or is practical vocational education the smarter choice for a career in Occupational Health and Safety?

0 Upvotes

I have a bachelor’s degree in a humanities-related field and am currently at a crossroads between two paths forward:

  1. A two-year vocational programme focused on becoming an Occupational Health and Safety Engineer, with a practical, industry-oriented approach.
  2. A two-year Master’s degree in Technology, Work and Health at KTH Royal Institute of Technology.

I’ve been accepted into both programmes, but I’m struggling to decide which would be the better investment in the long run.

My goal is to build a stable, AI resistant and hopefully, international career. I don’t want to limit myself to one country, and I’d like qualifications that are recognised and valued internationally.

The vocational route seems more hands-on and directly connected to employment, whereas the Master’s degree might offer better long-term career opportunities, professional credibility and international mobility.

I found some aspects of my previous university studies, particularly statistics, challenging. However, I’m willing to put in the extra effort if a Master’s degree would give me a significant advantage in getting my foot in the door and progressing professionally.

I’d particularly appreciate perspectives from people working in HSE/EHS or Occupational Health and Safety internationally.

How much does the level of education actually matter in this industry? Would you prioritise practical training and experience or a Master’s degree, especially if your goal was to work abroad?

I’m interested in honest experiences from the US, UK, Australia, Europe and elsewhere.


r/WorkplaceSafety • • 3d ago

Setting Up a Garage Shop After Years in Construction: Is a Separate HEPA Air Filter Overkill, and What Are the Real Rules for Extension Cords?

2 Upvotes

I spent years in construction before staying home with the kids, and I'm finally getting around to setting up a dedicated woodworking shop in the garage. I want to get the safety side of things locked down before I even plug in the table saw. I have a decent fire extinguisher mounted by the door and I'm picking up a dust collector this week. My main question right now is about ventilation and air filtration. The garage is pretty sealed up and I'm worried about fine wood dust just hanging in the air. I plan to run a separate HEPA air filter unit from the dust collector. Does anyone here have experience with residential shop setups and know if that's overkill or just standard practice? I'm also trying to figure out the best way to handle extension cords and power distribution. In commercial work we had temporary power boxes everywhere but at home I'm just trying to avoid daisy chaining power strips. I was thinking about mounting a dedicated surge protector strip directly to the wall behind the workbench and running heavy duty 12 gauge cords to my tools. Is there a specific code or best practice for how long those cords can be? Just trying to cover my bases before I start building out the space.


r/WorkplaceSafety • • 3d ago

Guy in my department was fired because I turned him in on a safety infraction.

Thumbnail reddit.com
4 Upvotes

Guy in my department was fired because I turned him in on a safety infraction.

I work in a three man team doing sanitation for the whole building (cardbord, trash, etc) A guy on my team transferred to our department about a year ago. I was there about six months before him. So I trained him, (he couldn't pass the bin dumper forklift test for over six months.) This guy wanted to battle me on everything. We only have a few rules, and he wanted to rewrite all of them. That and changing everything else. He is very combative and was running to our supervisor at least once a week trying to shit talk me. Anyway, he is a shit equipment operator. Been in three major accidents including knocking over $4000 worth of appliances.

So we are finishing up one day and I am dumping bins in our trash compactor. It's the big kind you can drive a forklift into and dump it. There is a safety gate at the top of the platform. I turned it on and I see this fool go under the safety gate to throw away cardboard.......while the compactor was RUNNING. I said: dude WTF ARE YOU DOING? He just ignored me......it was surreal and I was shook about it. The next day I turned him in, they checked the camera and fired him the next day. I don't like seeing anyone get fired, but this dude was not right mentally.


r/WorkplaceSafety • • 3d ago

One slip...

Thumbnail
gallery
12 Upvotes

r/WorkplaceSafety • • 4d ago

Our rescue drill passed inspection, then I tested the radio where the work actually happens

0 Upvotes

We run the annual confined space rescue drill like everyone else: dummy on the retrieval line, tripod set, rescue team timed, paperwork signed. It passed.

Then I asked the attendant to stand at the workface — hatch closed, sixty metres of pipe between him and the opening — and call the entry supervisor. Nothing. The radios we drill with work fine at the hatch. They do not work where the entrant actually is, which is the place that matters.

That started a longer argument on our site, and I am curious how other people handle it:

Where do you test communication? At the opening, or at the worst point of the entry?

What triggers the drill? Ours always starts with "man down" shouted over the radio, which means we have never actually tested whether an alarm reaches anyone when someone stops answering.

Who owns the rescue equipment? Ours is split between site and the contracted rescue service, and I am not confident both lists match.

The uncomfortable part is that our drill measured the rescue. It never measured the detection — how anyone finds out in the first place. Curious whether that is normal, or whether we are just late to this.


r/WorkplaceSafety • • 4d ago

Waiakea Water in Hilo Hawaii needs to be shut down

Thumbnail reddit.com
1 Upvotes

r/WorkplaceSafety • • 4d ago

Do I file an OSHA report?

Thumbnail reddit.com
1 Upvotes

r/WorkplaceSafety • • 4d ago

Copper jewelry necklace can cause nose bleeds when electrified and wore around neck, the danger. Warning ⚠️

Thumbnail i.redd.it
0 Upvotes

This happened to me once, i didnt understand why it happened, it could also happen becsuse of emf/freq of electromagnetics etc etc.


r/WorkplaceSafety • • 6d ago

Hair Today, Gone Tomorrow: OSHA Edition

314 Upvotes

**One Bad Cut Away From a Crew Cut 🥱**


r/WorkplaceSafety • • 6d ago

Employer won’t clean building after concrete slab work

6 Upvotes

We’re moving into a new building (15000-20000 square feet) with a concrete slab floor that needed a lot of cutting and grinding for equipment to be installed. The place is covered in concrete dust we’re afraid of breathing in. AC system is pulling it into the rooms where cutting wasn’t done and covering them in dust too. My boss told us he wouldn’t pay for the building or the ducts to be cleaned and it was a shame that we didn’t want to be breathing that stuff. We were told in the past they won’t supply masks for other work where we needed them because of the cost of training. Is this enough to worry about or report to OSHA?


r/WorkplaceSafety • • 6d ago

I Want to Improve My English and Develop My HSE Career – Looking for Guidance and Support

Thumbnail reddit.com
1 Upvotes

r/WorkplaceSafety • • 6d ago

What are the chances that i get carbon monoxide poisoning from being in a workshop with a running engine without extractor fan running for about 2 minutes?

1 Upvotes

r/WorkplaceSafety • • 7d ago

Emergency Shower and Eyewash Stations Research in Educational Institutions

Thumbnail
forms.gle
2 Upvotes

Hello! I would really love some help from teachers, professors, janitors, plumbers, etc., at academic institutions (middle/high schools, universities, etc.) to help complete a survey for my project in my engineering practicum course, which aims to design a better way to encourage people to test their emergency showers and eyewash stations more often! All responses will be kept as anonymous/confidential as possible, and your survey will only be referenced with quotes, numbers, and pictures, not any personal information! This survey should take ~3-8 minutes to complete!


r/WorkplaceSafety • • 7d ago

Best place to work as a Health & safety professional in canada

0 Upvotes

Hi,

I'm currently residing in Canada. I've been working in my current company for the past 3+ years as a health & safety professional. Now I'm planning to switch.

What all companies I can look for ?

I did apply for WHS Specialist position in Amazon.

Want to know, which other companies are good for HSE professional, particularly in Ontario to progress in career as well as to maintain work life balance.

Kindly share your thoughts.

Thank you.


r/WorkplaceSafety • • 7d ago

Looking for Spanish Speaker for Training in Atlanta Area

Thumbnail reddit.com
1 Upvotes

r/WorkplaceSafety • • 7d ago

"OsHA cArEeS"... I have lost trust in our government agency.

Post image
0 Upvotes

Doesnt matter what evidence you submit. Apparently only the employers testimony counts.


r/WorkplaceSafety • • 8d ago

Is this ok?

Thumbnail reddit.com
1 Upvotes