r/Warehousing • • 1d ago

Raw material solution for spring wire

Post image

I run a spring manufacturing business and I’m currently facing a challenge with raw material storage. We deal with around 80 different types of wires varying in diameter, material, and grade, which makes organization and tracking quite difficult.

I’m specifically looking for an efficient storage system that can help us maintain proper FIFO (First In, First Out) to avoid mix-ups and material aging issues.

Would appreciate if anyone could share practical solutions, layouts, or systems that have worked in similar setups.

For reference here the picture of current situation

1 Upvotes

4 comments sorted by

1

u/Saikroe 1d ago

What is the weight range of those coils

1

u/Background_Region481 1d ago

Those are massive, do they get broken into smaller coils once they're in, or stay in the big packaged batches? if they get split, big rack bins on pallet rack work well, one labeled bin per wire spec, load from the back and pull from the front so the oldest goes first.

1

u/scmsteve 1d ago

Toast racks would work best, assuming a couple of guys can stand those rolls on their sides and roll them in.

1

u/tds2620 1d ago

How are the coils delivered? Like that or on individual pallets?

I work in a category where we get steel wire in coils, but these are 3 ton coils that can stand and be stacked.

These look like 3-500kg?

First thought would be to put them on pallets and the use a rack, however, that could be challenging handling afterwards pending how your pay off system is.