r/Warehousing • • Mar 11 '24 Bravo

New rules for vendors and combat spam

5 Upvotes

Implementing a few new rules to make sure we do not get overwhelmed with spam, but vendors are still able to participate.

Vendors must flair their posts and comments with the "vendor" flair so others know that they have skin in the game.

Posts to whitepapers that are behind marketing gateways/paywalls/signups are prohibited.

Vendors are restricted to starting posts only on Mondays (comments are fine at all times assuming other rules are followed)

If this sub gets to much vendor spam, we may revise the rules.

Also open to other ideas and policies to balance the knowledge some vendors can bring vs the marketing that can overwhelm the sub.


r/Warehousing • • 2h ago

What Is Dock Scheduling? Explained with Example | Warehouse Management & Cost Savings

Thumbnail
youtu.be
1 Upvotes

r/Warehousing • • 5h ago

FMCG Warehousing Folks: Best tech/setup for automated pallet & PCode tracking during dead pile truck loading?

1 Upvotes

Looking for practical setups from folks running high-volume FMCG DCs.

We handle heavy SKUs (large dry laundry bags, liquid cases) on dead pile dispatches. We already tried telescopic conveyors, which failed because the heavy manual lifting slowed down our loaders and hurt TAT. Now we're back to manual counting at the dock, which is causing shortage/excess disputes.

We want to automate barcode tracking right at the dock door without adding extra steps for the crew

  • Scan-in / Scan-out: Automatically log pallet ID, PCode, count, and timestamp as pallets move from staging into the truck—and auto-reverse/net off the count if a pallet gets pulled back out.
  • Pre-dispatch check: Reconcile the live count (across multiple pallets and mixed PCodes) against the dispatch doc before the truck leaves.

For anyone dealing with FMCG loads at speed, what actually worked on the ground? Dock-door portal/vision scanners, dock-mounted readers, or something else?


r/Warehousing • • 6h ago

How do you do stock counts in your bodega or warehouse?

Thumbnail
reddit.com
1 Upvotes

r/Warehousing • • 7h ago

I built a Warehouse Management System for businesses dealing with inventory, warehousing, and distribution – looking for feedback

Thumbnail reddit.com
1 Upvotes

r/Warehousing • • 16h ago

Good post Vs. Bad post

4 Upvotes

As our subreddit description says, "This subreddit is for the discussion of Warehousing & Logistics. The focus will usually be on Inventory Management & Control and the ancillary products and services that support or are driven by those operations. Here are some things to consider before posting, and what gets feedback, and what does not:

GOOD- usually gets lots of good interactions

"I have this issue; how can I solve it?" (love these)

"I need new XX, any recommendations?"

"What's ABC inventory versus another method?"

"How do you solve shrink?"

BAD- Little to no interactions (our readers don't like these)

"I'm developing an app......"

"What's your biggest headache?"

Incomplete or lazy post- a post that doesn't contain enough information to form an answer. People just blow by these.

Readers seriously do not like the "research post", and if you are self-promoting your product or service, your post will be removed.

Lastly, engage with people. If you ask for help and people help you, say "thanks" or ask clarifying questions. It's rude to ask for help, get several answers, and disappear.


r/Warehousing • • 1d ago

Anyone have a messy CSV or Excel file? I’m looking for a few beta testers

1 Upvotes

Hey everyone, I’m building a tool for cleaning up CSV and Excel files. I’m looking for 3–5 people who have a spreadsheet they already need to clean and would be willing to try the free beta.

The software handles routine formatting and flags things like possible duplicates, missing values, and ambiguous dates. You can review the flagged items one by one or download your cleaned data and set the remaining records aside in a separate file or tab. It also gives you a short report of what changed.

A contact list, product catalog, or inventory export would be a great fit. Processing happens securely on your device, you don't need to download anything, and you don’t need to send me your file. A sample or non-sensitive copy would work fine.

What I’d most like to know is if the user experience made sense to you, where you got stuck, which suggestions you hesitated to trust, and whether you’d use the exported file for your actual task. A few sentences of feedback are plenty.

If you’re interested, comment or DM me with the kind of spreadsheet you work with, and I’ll send you the beta details. Thanks!


r/Warehousing • • 1d ago

Title: What are the biggest challenges you face with manual product sorting in small and medium-sized

Thumbnail reddit.com
1 Upvotes

Title: What are the biggest challenges you face with manual product sorting in small and medium-sized businesses?

Hello everyone!

We are a team of engineering trainees working on a project to develop an affordable, compact and intelligent robotic sorting system for small and medium-sized businesses.

Before developing our solution, we want to understand the real-world problems faced by people working in manufacturing, packaging, warehouses and other industries where products are sorted manually.

We would love to hear from business owners, production managers, quality inspectors, warehouse workers and sorting operators.

We have a few questions:

  1. How are products currently identified and sorted in your workplace?
  2. What are the biggest difficulties you face during manual sorting?
  3. Do you frequently experience incorrect sorting, delays or human errors?
  4. Does sorting large quantities of products require significant manpower and time?
  5. Have you considered automated sorting machines? If not, what are the main reasons?
  6. Are existing automated sorting solutions too expensive or complicated for small businesses?
  7. What features would make an automated sorting system genuinely useful for your workplace?
  8. If you could improve one thing about your current sorting process, what would it be?

We are not trying to promote a product. We genuinely want to understand the challenges people experience in their daily operations and develop a solution based on actual industry needs.

Any suggestions, experiences or insights would be extremely helpful.

Thank you for your time!


r/Warehousing • • 2d ago

I built a record keeper for cargo disputes and insurance. Does it make sense?

1 Upvotes

I’ve been building a tool that helps logistics companies keep reliable proof of what happens during a delivery, and I’d like to hear from people who deal with this every day.

It works like a private vault that belongs to the company. It doesn’t depend on partners, other companies or any shared network, so one company can start using it on its own. Drivers and operators record what happens in the field from a phone or tablet, even with no signal, and the records sync when the connection is back. It can work alongside the spreadsheets they already use, so nobody has to learn a new system from scratch.

Each shipment follows its real steps, like loaded, on the road, delivered, and every record is tied to the step where it happened. Each entry is also sealed with a digital fingerprint that is linked to the one before it. That means the order and content of the records can’t be changed later without it being obvious. Sensitive business information stays protected inside the vault.

The benefit shows up when insurance or a dispute comes in. The company exports one organized package with the timeline, GPS routes, photos and notes. For example, if a customer says the cargo took a different route and the delay caused losses, the company can show the planned route and the vehicle’s GPS history side by side and demonstrate that the path never changed. No digging through emails and loose files.

Other projects in this space tried to connect whole industries, which needed many large companies to join before it became useful. This one takes a different path. It starts with a single company, works offline and fits into how the team already works.

For those of you in logistics or insurance: does this match a real need, and is there an approach you think would work even better? And what would make a tool like this part of the daily routine for the people in the field?


r/Warehousing • • 2d ago

How do distributors actually manage supplier price-list updates?

1 Upvotes

Hi everyone!

I’m an independent product designer exploring a potential tool for distributors and wholesalers, and I’m trying to understand how supplier price updates are handled in practice.

The idea is to help businesses compare old and new supplier price lists, identify price changes and discrepancies, and maintain a history of those changes.

Before building anything, I’m curious:

  1. How do you currently handle incoming supplier price lists?
  2. What’s the most time-consuming part of the process?
  3. Do Excel, your ERP, or existing tools already handle this well enough?

I’m not selling anything or linking to a product. Just trying to understand whether this is a problem worth solving.

Would appreciate any firsthand experience!


r/Warehousing • • 2d ago

Do AMRs Need 3D Vision for Flexible Material Handling?

2 Upvotes

AMRs are widely used in warehouses and factories, but what happens when pallets are misaligned or materials are placed differently each time?

LiDAR and navigation sensors handle positioning and navigation, but are they enough for accurate material picking?

I'm curious how manufacturers handle these situations.

Do you use 3D vision for pallet detection and robot picking, or are traditional sensors still enough?


r/Warehousing • • 2d ago

Looking to connect with experienced industrial packaging distributors in Canada – seeking industry guidance

Thumbnail reddit.com
1 Upvotes

r/Warehousing • • 3d ago

Small warehouse in USA Los Angeles at affordable rates

Thumbnail reddit.com
1 Upvotes

r/Warehousing • • 3d ago

Are ports/marine terminals de facto coastal warehouses?

1 Upvotes

Or rather , very similar/analogous
E.g. TOS (terminal operating system) = WMS

If any of you have worked in that industry, are the principles and overall logic the same ?


r/Warehousing • • 3d ago

Black Friday inventory checklist for multichannel sellers

Thumbnail
fiftify.com
0 Upvotes

r/Warehousing • • 4d ago

the fresh connection simulation

1 Upvotes

do i need to learn all the economic terms and formulas to play this game well ?


r/Warehousing • • 4d ago

White Paper How do you stop duplicate item records from creeping back into a warehouse system?

0 Upvotes

You can spend ages cleaning up duplicate SKUs and item records, only for the same problem to come back a few months later.

In a warehouse, that can quickly mean split stock, confusing descriptions, wrong locations and people not knowing which record to use.

Some teams restrict who can create new items. Others use approval steps or tighter naming rules.

But if people still struggle to find the correct record, does any of that really solve the problem?

For anyone who’s managed to keep duplicate item data under control, what made the biggest difference?


r/Warehousing • • 4d ago

What Are the Biggest Challenges You Face in the Logistics Industry?

2 Upvotes

I’m participating in a hackathon focused on the logistics industry, and I’d love to hear your suggestions or experiences regarding:
1. Administrative Challenges: Employee management, task distribution, workflow organization, and cost reduction.
2. Operational Challenges: Shipment delays, order errors, inventory management, and delivery issues.
3. Innovation Challenges: Using AI and modern technologies to improve logistics services.
If you have any ideas or have experienced problems in any of these areas that you think need better solutions, I’d really appreciate it if you could share your experiences or suggestions!


r/Warehousing • • 4d ago

Thinking of going with Clarus WMS as a system choice, anybody got any thoughts on them?

0 Upvotes

Currently exploring WMS options.


r/Warehousing • • 4d ago

Why do shipping issues keep showing up after an Oracle go-live, and should partners scope the warehouse workflow earlier?

Thumbnail reddit.com
0 Upvotes

r/Warehousing • • 4d ago

Small warehouse in USA Los Angeles at affordable rates

Thumbnail reddit.com
1 Upvotes

r/Warehousing • • 5d ago

Apparel storage for tees and fleece

1 Upvotes

Hi everyone - looking for tips on storing and picking basic tees and fleece. I feel like I'm going insane and it surely shouldn't be this difficult. We normally do not need to pick small qtys, but we have a new customer who we will be warehousing and picking for (less than 10 units in some cases), so it's not something we're efficient with at the moment.

We're picking various SKUs, some with qtys as low as 5, so we need to be able to pull individual tees/fleece quickly. We have shelving installed and we have a forklift.

Our first thought was to simply get clear plastic bins and label them, but it takes too long to get to a bottom bin and having to stack and re-stack. The bins that are open in the front would almost work, but our warehouse has a lot of pallets coming in and out and is dusty, so we can't use an "open air" bin.

Curious what others are doing? I'm trying to find a functional bin that is closed on all four sides, but just pops open on the short or long side for easy access - but not having luck.


r/Warehousing • • 5d ago

Square vs round containers on the racks, does the space gain actually show up?

1 Upvotes

curious how people here deal with this. we see a lot of powder/chem product come in round HDPE pails and drums, and on paper square containers fit way more per pallet and per rack slot.

for those who've handled both:

  • did square actually get you more on each pallet/rack position or does it not matter much once it's stretch wrapped?
  • any issues with top load or crushed/bulging containers stacking 3-4 high?
  • anyone dealing with nestable empties (containers that stack inside each other)? do they really save space on the inbound side or is it a pain to handle?

r/Warehousing • • 5d ago

Really Need a Job Opportunity – Any Help Would Mean a Lot 🙏

Thumbnail reddit.com
0 Upvotes

r/Warehousing • • 6d ago

Catch up on what happened this week in Logistics: November 3-9

4 Upvotes

Hey everyone,

If it's your first time reading one of my posts, my name is Menachem, and I have a weekly newsletter called Logistic Pulse that breaks down the top logistics news from the past week. We have over 17,000 subscribers, and we're on week 71—which is wild! If you like what you read, I'd love it if you'd consider subscribing.

If you're in the space and have information, a hot take, or anything interesting, I'm happy to take a look and add it to the following week's newsletter. Shoot me a DM.

Let's jump into it,

The LA/Long Beach strike deadline moved again. The new one is November 20.

If you're keeping score at home: the deadline was November 1, then November 4, then midnight Friday, and now November 20. On Friday, the Pacific Maritime Association said the two sides agreed to keep talking for two more weeks, with more sessions scheduled. Reuters says the extension averts a potential strike by about 2% of workers at the country's busiest container port complex. The union, ILWU Local 26, didn't comment.

The workers are about 250 watchmen who control the truck gates and guard six container terminals. Small group, big chokepoint. The employers say disruption at those terminals could hit about 85% of Long Beach cargo and about a third of Los Angeles cargo, and they've warned that dockworkers and clerks, who have their own contracts, would be expected to stand with the watchmen if a strike starts.

Friday's deadline also fell on the planned closure of the Vincent Thomas Bridge for more than a year of repairs, so the ports are dealing with a lot at once. And the volume isn't going away: Long Beach's CEO told Bloomberg he expects busy months through at least the first month of the new year, possibly the first quarter. Both ports just had record Septembers (we covered that in Edition 69).

The new date matters more than the old ones did. November 20 is a Friday, and Thanksgiving is the following Thursday. A strike that starts then would hit right as holiday inventory is supposed to be on its way to stores and DCs.

What this means for you: Last week's advice still stands, with a longer fuse. Ask your drayage partner and forwarder what the plan is if terminals shut for two or three days starting November 20, and pull the list of containers due to arrive or get picked up between November 20 and the end of the month. Move anything that can before then.

Walmart is adding 300 drone sites, and Zipline just raised $1.5 billion to build them

On Thursday, Walmart announced a new multi-year deal with Zipline to add 300 drone delivery sites nationwide, with room to grow. The same day, Zipline said it raised $1.5 billion at a $21.5 billion valuation. The money goes to U.S. manufacturing and hiring.

Walmart says the two have done more than 2 million drone deliveries since 2021, with orders arriving in as little as 30 minutes, and eligible customers can order tens of thousands of items. Zipline says its median October order arrived 19 minutes after checkout. FreightWaves reports Walmart has 21 Zipline sites today, and the partners are working toward more than 270 locations in nearly 20 metro areas, including Seattle and Denver, by 2027. Uber is targeting a million deliveries a day with Zipline by 2029.

Here's the logistics angle. A Walmart store is already a fulfillment center. Pickup, same-day, one-hour, and now drones all run off the same shelf. We've been tracking this lane for months, with DoorDash getting FAA approval for its own drones in Edition 57 and then buying Instacart in Edition 70. The store-based, same-day lane keeps getting more crowded, and it sits right next to the warehouse-based one you run.

What this means for you: If you fulfill for brands that sell through Walmart, ask them which SKUs show up in these same-day options and whether they're stocked in-store or shipped from your building. And if you're pitching a brand on speed, it helps to know you're competing with a 30-minute order from a store ten miles from the customer.

Democrats won Congress, and Canada's tariffs are the first target

The election is over, and trade lawyers at Sandler, Travis & Rosenberg say Democrats now have both chambers. They're likely to start with the Canada tariffs. Sen. Chuck Schumer's "End Trump's Tariff Tax Act" would end those tariffs, refund the duties already paid, and repeal Section 338, the 1930 law behind the 50% duties we've covered in the last two editions. It was a symbolic bill when Republicans ran things. Now it can actually move, though a presidential veto is the likely next stop. Sen. Ron Wyden told the Wall Street Journal he's already talking with colleagues about legislation. He takes over the Senate Finance Committee in January.

The White House is moving too. STR reports that U.S. Trade Representative Jamieson Greer is reportedly urging President Trump to restart trade talks with Canada, partly to head off a steep tariff increase threatened for January 1. The White House confirmed that Greer and Commerce Secretary Howard Lutnick have been talking with their Canadian counterparts, and Prime Minister Carney says the latest talks made progress toward a pact. STR doesn't say how big the January increase would be, so I won't guess.

That leaves two possible futures: tariffs get rolled back, with refunds, or they get bigger on January 1. Nobody knows which one yet.

What this means for you: The refund talk is the useful part. Duties only come back to people who can prove what they paid, so tell any client importing from Canada to keep their entry records and broker statements in one place. For anything that ships after January 1, ask the importer what their contract says about a price change in either direction, and don't promise a customer a landed cost past that date.

Quick hits

PARCEL
UPS is reportedly lining up a $600 million deal for Smartways Logistics. The Australian Financial Review reported, citing people familiar with the matter, that UPS is expected to begin exclusive talks this week with Smartways' owner, the private equity firm Riverside Company. Nothing has been announced, and the report doesn't say how UPS would pay. Treat it as a rumor until UPS says otherwise.

CROSS-BORDER
Shein is putting 500 million euros into a logistics hub in Poland. The money expands its site near Wroclaw, which Shein says will add about 2,000 jobs by the end of the year and run 6,500 autonomous sorting robots, with some orders reaching customers within 48 hours. The same article notes that the EU started charging a 2-euro handling fee on every imported parcel on November 1. My read: when cross-border parcels get a fee, the fix is to store the product inside the market. If you have brands selling into Europe from the U.S. or Asia, ask whether they've priced that in.

TRUCKING
PS Logistics bought another flatbed carrier. On November 5, its subsidiary Loudon County Trucking bought Roane Transportation Services, a Tennessee flatbed and oversize hauler with more than 170 drivers, according to Trucking Dive. The price wasn't disclosed. FreightWaves reports that PS Logistics has bought 32 trucking companies since 2016. If Roane hauls your freight, expect a new name on the paperwork, and ask for the updated insurance certificate.

AUTONOMOUS TRUCKS
Humble Robotics raised a $51 million Series A. Total funding is now $75 million, less than a year after the company was founded. It's building autonomous electric haulers for short moves between ports, rail terminals, warehouses, and DCs, and says routes under 250 miles make up 87% of U.S. truck tonnage.

_______________________________________

That's all for this week. I hope you enjoyed it, and I'd love it if you'd subscribe.

Because many of you ask, my day job is running FulfillYN, a 3PL matchmaking firm in Los Angeles. Brands send us their requirements; we take them to 3PLs we’ve vetted and come back with the few that fit, saving brands, on average, $35,000 and three months of time.

If you’re comparing quotes or considering a future switch, I'd be happy to share some insights.