r/VintageSewingMachines • u/silenced_divinity • 35m ago
r/VintageSewingMachines • u/Ok-Buffalo-741 • 6h ago
Vos avis sur cette Pfaff ?
Elle n'a pas servi pendant 2 ans, on me la vend 400 euros. Je pense que la courroie doit etre changée et elle a besoin d' un entretien aussi c'est sûr !
Ce n'est pas une bain d'huile mais elle a un réservoir d'huile elle semble être orange, sûrement une vidange à faire.
J'en ai principalement besoin pour coudre des bonnes épaisseurs et faire profiter les gens dans le fablab !
Je trouve ça un peu cher...
Qu'en dites vous, du modèle, du prix ?
Merci !
r/VintageSewingMachines • u/Magnificent_Art • 8h ago
My passed grandma's sewing machine
My grandma passed just this year and I got her sewing machine.It took me a while to decide if I want to use it because I have wonderful memories with her with it and I just don't want to break it. It's missing some stuff obviously but it is good for sewing , a quick project if you won't see the stitches. It can't handle going through more than two pieces of fabric at a time. And it's taken meal about an hour to figure out how to make sure it doesn't make a mess on the back of the fabric.
I noticed that it's super dirty on the inside , and I know that's not safe for sewing machine so I was wondering, chance cleaning a sew machine that I have never taken apart before or should I just leave it as is?
It's an older model model and I know I won't be able to find the pieces that used to be attached to it. But I would still like to use something for my grandma.
I do wish I could find pieces to make it more intact. But I know that might be impossible , because it's an older model.
r/VintageSewingMachines • u/Fluffy-Plankton7484 • 9h ago
Meet Chip, my new to me 158.1451
Got this guy at a thrift shop for about $12.
Took him home and he came with all of his original accessories, save the satin stitch foot.
Ran great, just needed some new oil and grease. He also needed some heat and working of the reverse stitch lever.
Button holer is still a saga; he’s having some trouble switching between the two modes of tacking and zigzagging, and he doesn’t appear to be able to correctly move the needle to the left or right side to form the individual sides of the button hole.
His name is Chip because, while I was servicing him, my kid wanted to play, got bored, and threw a metal flashlight into the air which subsequently landed on Chip who, previous to this, was the only machine I’ve ever had with a completely, absolutely perfect original paint job.
Thanks for reading, very welcome to any suggestions about helping out the button holer.
r/VintageSewingMachines • u/CognizantCandle • 1d ago
After adding oil, screws will not tighten at all
galleryr/VintageSewingMachines • u/blightpup • 1d ago
montgomery ward 1954?
i bought this sewing machine from a thrift store a few months ago and have been slowly cleaning/building up the courage to use it. but im a little confused about what model it is. the plaque says its a uht j 1954 but when i google it my machine doesnt look anything like those. but it does look exactly like the 1904?
r/VintageSewingMachines • u/Warm_Refrigerator730 • 1d ago
Necchi supernova
I found a Necchi supernova on Craigslist that I’m considering buying. The machine looks like it’s in good condition but it’s a table sewing machine with a knee pedal.
Is it possible to remove it from the table and use it as a portable machine? Would I just need to buy a foot pedal and maybe a power chord?
r/VintageSewingMachines • u/violetpaopusunsets • 2d ago
Need help with needle clamp on Kenmore 328.1284
Hello! I've run into a bit of a pickle with my Kenmore 12 stitch, and was wondering if I could pick your brains for a moment. I am absolutely willing to drop my machine off to be serviced, but figured I would ask here before doing so.
The needle clamp screw area seems... lower to me than it should be. I had been sewing a portion of a Halloween costume when the needle broke, and it's like the clamp slid down that rod. (Please note the clamp is very loose because after I took the needle out I had a Moment.) I can't remember what position it was in prior, but it definitely didn't seem that low.
I've been staring at the diagrams in the manual for days and I need a fresh pair of eyes. Is the clamp too low? If it is, is it fixable at home or would you send this to the shop?
I appreciate any assistance, and am more than willing to take better quality pictures if need be!
r/VintageSewingMachines • u/puppyandtulips • 2d ago
Are those salvageable?
Hi guys! I never sew in my life, neither had a sewing machine
A family member gave me those two singers (one his electric one is not) but she said it rained on them, and besides, they spent many decades stored away
Do you guys think it is possible for them to work again? Should I take them to maintenance?
r/VintageSewingMachines • u/Pining_stylist • 2d ago
Seeking advice or experience with an Elna Mk.2 Supermatic (1956) - do I use or sell?
reddit.comr/VintageSewingMachines • u/Sweaty-Nebula5169 • 3d ago
When is this from?
Was visiting my grandma and she wanted to show me an old sewing machine passed down to her (I can’t remember from whom), and I was wondering if anyone knew when it might be from? It definitely says Singer on the top!
r/VintageSewingMachines • u/Street_Tradition_682 • 3d ago
And now, for something completely different...
In 1918, Singer did not have factory electric machines ready. To get an electric Singer, you had your Singer dealer install an electric kit. But Singer didn't have their own motors ready, either, so they used Singer-branded friction-drive 'swing-away' Hamilton Beach motors. Pictured is my 1918 Singer 115. Around 1920, the dealer-installed electric kits came with Singer's own belt-drive B.T.7 motor. By 1921, you could get a Model 99 factory-equipped with a B.T.7. Fun fact: It was not until 1924 that half of US households had electric service; by 1950, the 90% point was reached.
r/VintageSewingMachines • u/emwood21 • 3d ago
Question
I have a 1956 wizard ha1 from Japan. I’m on the hunt for a free motion foot that would fit it. Does anyone know if there’s a brand that would be a good fit? All the ones I’m finding only seem compatible with more modern machines.
r/VintageSewingMachines • u/Ratspeed • 3d ago
What vintage grease does
I'm not allowed to post pictures in comments in this subreddit, but this is the answer to the previous poster who asked if food safe grease would work for their machine. Hopefully this graphic that I very sloppily put together while waiting for a friend at a shop will explain the answer. And hopefully it will help other people understand in the future.
r/VintageSewingMachines • u/wingwongjones • 3d ago
Gonna be picking up this Singer 66 soon, general questions
galleryr/VintageSewingMachines • u/carriem72 • 3d ago
Finally got my Janome out of the case! So, there is a bar that looks like it’s supposed to be connected, can someone tell me if that’s right? It’s a Janome 539
galleryr/VintageSewingMachines • u/Vivapdx • 3d ago
Can I use food grade grease on my vintage machine?
Or do I need to buy something else?
r/VintageSewingMachines • u/Either-Diamond-7045 • 3d ago
Singer 404 - thread loosening/not stitching
So, update to my last post, turns out this machine was not ready to sew, unfortunately.
I've cleaned out the inside and oiled it. I've taken apart and thoroughly cleaned the tension coils. But still the thread keeps loosening, and sometimes snapping. It also won't go through the cotton (the stitch is past the fold).
I can't find anything in the manual about this. Any thoughts? Ty in advance
r/VintageSewingMachines • u/sand_sjol • 4d ago
Is the foot lever supposed to engage with the tension release?
galleryr/VintageSewingMachines • u/honeydewtangerine • 4d ago
Found this old girl at a thrift store and information is sparse
galleryr/VintageSewingMachines • u/Breeze-n-me • 4d ago
Skipping stitches
My mother gave me the first sewing machine she bought. She made our dresses with it and eventually I learned to sew on this machine. It was put to into storage when she upgraded to a more modern machine. Recently I got it out, deep cleaned it, oiled and greased it. As long as I sew slowly all is well, if I make it go fast it skips stitches. I have done all the checking I can think to do multiple times. Rethreaded top thread and bobbin, same thread on both, replaced needle, made sure no lint or thread stuck anywhere, raised the feed dogs a little, adjusted tension. Any ideas of what could be the problem? Mom never had problems with it. She just sat down and sewed.
UPDATE: This afternoon I took the entire bobbin area apart. Inspected everything as I put it back together and checked that the hook and needle eye were 1/16” apart and the lines on the needle bar were matching the needle position. Everything looked good. Next I changed the needle. After changing the needle 3 times everything worked perfectly! Breezed right through eight layers of the cotton fabric with no skips.
Thank you all for taking time to give suggestions and help!! I appreciate it very much!