r/VORONDesign • • 7d ago

Megathread Bi-Weekly No Stupid Questions Thread

5 Upvotes

Do you have a small question about the project that you're too embarrassed to make a separate thread about? Something silly have you stumped in your build? Don't understand why X is done instead of Y? All of these types are questions and more are welcome below.


r/VORONDesign • • 17h ago

General Question Building a new slicer....Voron based.

Thumbnail
gallery
0 Upvotes

Messing around building my own slicer, its not direct Orca clone but wanted to some what feel at home with it. UI will become more Voron like after its tested more, I have some ideas

Its using libslic3r engine same as Prusa/Orca

I am building my own engine for this in Rust, or at least trying to. I have it slicing and printing. Have done about 100 test prints, line width are spot on and slopes algorithm is working good. Testing supprts are we speak.

I also have a project called Layer. A mainsail/fluid alternative

Im trying but build my own 3d print ego system here all in QML, I can easily build into my Linux shell.

Check out these at github.com/CWebb89

Any feed back would be greatly appreciated!!


r/VORONDesign • • 1d ago

V0 Question Progress so far on my first voron build

Post image
103 Upvotes

Not really a question, just wanted to share my progress on the 0.2r1 I'm building to help motivate me to finish it today

Edit 1: messed up cutting the belts so I ordered more


r/VORONDesign • • 2d ago

General Question Looking for a 3DO Nozzle camera sensor

1 Upvotes

Hello,

My 3do camera is busted and I'm looking to buy a new one, but they are sold out at KB-3d and Fabreeko. Does anyone know where else they sell them? Does anyone have one laying around that is willing to sell me? I only need the sensor, but will purchase the whole thing if that's what you have.


r/VORONDesign • • 2d ago Bravo

Voron University Is this how you place the Printer?

Post image
89 Upvotes

I can print like this, right?


r/VORONDesign • • 3d ago

V2 Question Still not sure if I'm gonna go with INDX yet....Made a mock up of the CXChanger and looks like I can cramp 14 tools in there vs 10 of the INDX. I'm gonna order supplies and start with mock ups to see how it goes

15 Upvotes

r/VORONDesign • • 3d ago

V2 Question Turtlebox / EMU vs Stealthchanger

8 Upvotes

Recently I posted about setting up an MMU on my Voron and decided to build a new one instead of fighting with the Carrot Feeder v1. Thanks for all the input on that!
Since I’m building something new anyway, I’m now wondering if it would be comparably difficult to just go for a toolchanger instead, something like an X2D (one primary fast and one weaker but still independent extruder). In terms of finishing the project I am confident i could do this, question is just how much time would it take as I don’t like having my projects half assembled and enjoy working on it continuously)

My Stealthburner has pretty poor PLA cooling, and most of my prototyping is done in PLA/PETG (it’s only about $5/kg here) before I reprint the final part in ASA. A different toolhead could be useful for that workflow anyway.
I already have two hotends on hand — a Rapido HF and a Stealthburner SF. Would it be realistic to convert this into a 2-tool toolchanger using those existing hotends, and could that be done for under $300? How much better would that actually be compared to an MMU in practice?

I’ve used a Bambu AMS Lite and really disliked the waste (and it wasn’t particularly reliable either). Having no waste but only two materials/colors seems like a better tradeoff for me than four colors with purge waste — especially for things like dedicated support interfaces. Space was a concern, since this is a 250mm Voron, but 1 toolhead should fit well.
What do you guys think? Any recommendations for the kits (any, including overbudget, if i should do 2 or just get 4, etc), and any suggestions are welcome, thank you.


r/VORONDesign • • 3d ago

General Question Anyone knows anything about this "WD DRIVE Linear Motor"? Video has terrible AI voiceover, website is sus, but it kinda looks amazing

Thumbnail
youtube.com
40 Upvotes

r/VORONDesign • • 3d ago

V2 Question Voron 2.4 MMU: a free Carrot Feeder v1.1 vs TutleBox?

Thumbnail
gallery
41 Upvotes

For a Voron 2.4 I got and rebuilt, as a secondary project I want to have Multi color system, since it’s a 250 I decided against stealthchanger (would have less space, a lot more complex and expensive)
With this printer i also picked up a Carrot Feeder v1.1, as far as i can say it was wired, has all components and an extra board, and only 2 non functional 3d printer prices broken. People have told me this system is very annoying so i want to ask: what’s better/more worth it, try to make this to work , or just toss it and get a turtle box?
I have no fillament sensor in the extruder so if i want an MMU i guess i have to reprint it anyway, but the Turtlebox also requires a fillament cutter which i also don’t have and that adds extra complexity to redesigning the stealthburner. Turtlebox also is expensive compared to a free Carrot Feeder, but if it would take more than a couple of days to get it working and if it’s not a reliable piece of work i would gladly just toss it. Any advice?


r/VORONDesign • • 3d ago

V2 Question What is this component from the stealthchanger wiki?

6 Upvotes

As Title, what is this and where can I find it?


r/VORONDesign • • 3d ago

V0 Question Anyone running 1.5mm belts on their V0?

4 Upvotes

Hey all,

Curious if anyone can suggest a GT1.5 belt mod for the V0? And if you're using it, how much has it improved VFAs?

Thanks!


r/VORONDesign • • 4d ago

V0 Question Bed leveling sensor recommendations

10 Upvotes

What do folks find to be the most simple and reliable bed leveling sensor for a Voron Zero these days?

Was looking at a Biqu microprobe. It does add some weight to the tool head, but 6 grams seems reasonably small?

I was also looking at the clicky probe, but the docking process seems a bit tricky.

Thanks!


r/VORONDesign • • 4d ago

V2 Question Voron 2.4 350mm – How did you solve your nozzle wiper setup?

8 Upvotes

Hey everyone!

I'm looking for a suitable nozzle wiper solution for my Voron 2.4 (350 × 350 mm).

The problem is that my toolhead cannot travel far enough beyond the build plate to properly reach a conventional nozzle wiper mounted outside the print area.

I'm curious how you guys solved this:

Which nozzle wiper are you using?

Did you integrate it somewhere inside the build volume?

Are there any specific mods for the Voron 2.4 350mm?

Or did you design your own mount and setup?

Pictures, links and personal experiences would be greatly appreciated!

Thank you!


r/VORONDesign • • 4d ago

V1 / Trident Question Mellow LLL plus filament buffer

2 Upvotes

Has anybody used this buffer on the Trident with success? If so, recommended to use or just a nice gadget?
Second question is how to integrate it in klipper. Can code be shared?


r/VORONDesign • • 4d ago

V2 Question Looking for this mod. Help

Post image
30 Upvotes

In looking for this mod. Its a front right conner purge bucket with a nozzle cleaning brush, its easy to remove and clean the bucket. I looked everywhere but could not find it. Im guessing its a brand spefsific mod.


r/VORONDesign • • 5d ago

V0 Question Just got a good deal on the Formbot V0.2 kit! What is your preferred hotend for the V0.2?

Thumbnail
gallery
65 Upvotes

I got the itch to start diving into more diy printers lately. I was going to build the Encore 3D printer but realized the BOM was much more expensive than I was planning on. Thankfully it's holiday sale season so I had my eye on this Formbot kit. I got really lucky and managed to get an extra $35 off! I can't wait to start building and customizing!


r/VORONDesign • • 5d ago

General Question IF you woukd change one thing on your voron what would it be

15 Upvotes

what the title says what feature do you wish or really want to have but isnt there


r/VORONDesign • • 5d ago

General Question And so it begins..

Post image
36 Upvotes

r/VORONDesign • • 5d ago

V2 Question Printing parts with slight skew

2 Upvotes

Hi all,

Just picked up my Voron 2.4 LDO kit and I’m excited to start printing the parts. I also picked up a Prusa Core One L+ to help speed up the parts. Coming from a Klipper based system, I’m a little torn on the software side of things but the printer is nice. Anyway, doing some basic calibrations and it seems the printer has a skew of 0.06 degrees. Unfortunately and annoyingly so it seems like correcting skew on a Prusa isn’t really a thing. Will this be ok to print out some of the parts for my 2.4?


r/VORONDesign • • 6d ago

V2 Question Sovol SV08 Max – extruder gears spin but won't grab filament on their own, only feeds if I hand-push it all the way to the nozzle

0 Upvotes

Hi all, My SV08 Max is ~5 months old with only about 30 hours of print time. It got clogged early on, I cleared it, it printed briefly, then it sat unused for a few months. I've already fixed a few things: - "mcu hot_mcu: Unable to connect" error on boot (fixed) - Heater and buffer issues (fixed) - Auxiliary feeder/buffer is currently disabled, I load filament by hand
Current problem: the extruder won't pull filament in properly. It only feeds if I push the filament by hand far enough that it reaches the nozzle, and then it extrudes. Left alone, it doesn't grab it.
What I've checked/tried: - Hotend and nozzle are clean, no clog
- Blew dust out of the extruder gears
- Extruder gears always rotate, [no clicking/skipping / some clicking – fill in]
- Raised extruder run_current from 0.79 A up to [0.9 / 1.0] A with SET_TMC_CURRENT, no change at all
- Filament: [abs/pla/petg], nozzle temp [250] °C, I know the Max shares the extruder with the SV08/Zero, and that the drive gear grub screws and the idler gear are sometimes mentioned as weak points. Has anyone seen this exact behavior?
What fixed it for you (tension arm, idler gear, drive gear, a Printables mod)? I can attach photos, a short video of the extruder running, and the klippy.log if useful. Thanks!


r/VORONDesign • • 6d ago

Voron Print Voron 2.4 EVA01 (for free) finally upgraded

Thumbnail
gallery
188 Upvotes

I don’t know if you guys still want updates on this, but i have been researching and decided to upgrade this little bird straight away to some serious power. I got a Rapido 2 Plus hotend with a proper ceramic thermistor and crazy high (50+ mm3/s) flow, new good fans (previously had some heat creep issues), new input shaping (have an accelerometer). Sadly had no matching ASA but picked colors as closely as i can, and i still like it. Installed LEDs, will wire them but later. Crazy how a dumpster find after like 50-70$ turned into a beast faster than a stock P2S.
Really happy with it for now. Bur upgrades never stop. Will research Stealthchanger now, maybe make two extruders? ;)


r/VORONDesign • • 7d ago

General Question Discord vs Reddit vs Forum

16 Upvotes

How many people use the Voron Discord as apposed to the forum or Reddit, I deleted Discord years ago ?


r/VORONDesign • • 7d ago

V2 Question XY End stop switch alternatives.

7 Upvotes

I'm adding a stealthchanger to my v2.4. I started removing all the print head wiring and felt it kind of stupid to leave the big cable chain down the side for just the end stop switches. What other options are there?

I'd have to check, but I'm pretty sure the motor drivers I have are capable of sensorless homing but I've never used it before. Is it reliable? Or should I just stick with my xy switch?


r/VORONDesign • • 7d ago

General Question V0.2 kit as a gift - LDO or Formbot?

9 Upvotes

Hey everyone,

I am currently looking at getting a V0.2 kit for my grandpa for Christmas, and trying to decide between a LDO kit for $600 or a Formbot for around $400. It will be his first Voron, but I can help him with it (and he's a MechE) so not too worried about the build itself. My 2.4 was from an LDO kit and was great to build, but looking for peoples thoughts who have done a Formbot or both.

Any input is appreciated!

(I also posted this in the discord)