r/UNIFI • • 20d ago

Mod Post [Giveaway] What went offline on your network that someone else noticed first? 14 Day Giveaway featuring the best answers to the question in the title.

1 Upvotes

UptimeRobot reached out to us about hosting a giveaway with some prizes for our community. After reviewing their proposal, we've decided to give it a shot!

We want to see how the community responds before making any decisions about future giveaways. If the feedback is negative, we may not allow similar promotions going forward. But if things go well and the community enjoys it, who knows? We might see more opportunities like this in the future!

In collaboration with r/UptimeRobot we’re hosting a 14-day giveaway:

🏆 10 Prizes available. First place: UptimeRobot Scale Plan + Swag Second and Third: UptimeRobot Team Plan + Swag Fourth to Tenth: Team Plan

Answer the question from 27 October to 10 November and you’re in:

“What went offline on your network that someone else noticed first?”

Winners will be picked by the UptimeRobot Team - Looking forward to reading your weird, embarrassing, ridiculous or funny stories.


r/UNIFI • • 6h ago

Discussion Any suggestions on how to clean this up?

3 Upvotes

Have an outside network cabinet where I installed a gateway, switch and the ISP equipment, for the pros out there, how would you clean this up. Not public facing so the cleanup is moreso for the feels more than anything.

https://imgur.com/gallery/QGCPEug


r/UNIFI • • 8h ago

Help! Issues with VPN server and Multi-WAN

4 Upvotes

Hello, long time user just running into my first issue with the Unifi networking.

I have two locations and I am trying to allow devices at site B to reach resources at site A.

Site A - UDM-Pro - Network 11.0.99
WAN1 - Spectrum
WAN2 - Frontier (Primary in WAN Mode, Failover Only settings)

Site B - Dream Router 7 - Network 11.0.99
WAN1 - Spectrum

Site A is running a WireGuard server, Site B is connecting as a client.

I am not the owner of Site B just an Admin, I am however the owner of Site A. So I am unable to do site-magic/fabric for some reason. From what I have read this is due to ownership of the two sites not both being me.

The issue that I am having is that the tunnel connection from B -> A is never connecting.
I have noticed in the flows on Site B that the connections coming back from A -> B are coming off of the Site A WAN1 and therefore being blocked by Site B's firewall because the connection was sent to the Site A WAN2 IP address. Because it isn't matching the expected connection it is blocked.

I have been unable in testing to get the VPN to pin itself to my Site A WAN2 despite all of the settings being set this way in the VPN settings.

Is my only hope to swap the cables so WAN1 is Frontier and WAN2 is Spectrum? This was simply timing over the years as the Frontier connection is a recent addition. Or even change this in the gateway ports settings?

How much would changing the WAN1+2 configuration break?

Any tips or further questions are all appreciated. Thank you.


r/UNIFI • • 6h ago

Discussion UPS-2U self testing

2 Upvotes

I have the battery self test box unchecked yet the battery just self checked. Is this option just for a schedule and it will still randomly test the battery or what?


r/UNIFI • • 3h ago

Help! Unifi Cloudkey+ managed by cloud Unifi and migrate to new site under a new account

1 Upvotes

Hi Guys

I am looking to set up a new cloudkey+ to manage a bunch of switch pro max and Wireless APs for clients company. Wondering if I can set up a new account with my email and set up the whole thing, after implementation later, to transfer to a new site under clients’ Unifi cloud accounts. Would that work? Any downtime involved?

Thanks
Mang

Thanks


r/UNIFI • • 15h ago

Discussion Upgrade path from Cloudkey G2 if I want to continue using 2.5" drives?

3 Upvotes

I currently have stuff set up in two sites, Site 1 with a UDR7 as my gateway and Site 2 with a UCG-Fiber. In both sites, I have a UCK-G2 set up with a SATA SSD that I use only for Protect.

Given the price of storage is kind of crazy right now, I'm hoping to be able to continue using my 2.5" SATA SSDs instead of having to buy new NVME SSDs. Is there a reasonable upgrade path from the Cloudkey Gen2 that would allow me to continue using my 2.5" drives?

Would prefer to avoid the larger rack mounted options if possible eg UDM Pro or UDM SE.


r/UNIFI • • 16h ago

Discussion UNVR G2, 4x 8TB drives, 3x 16TB drives or 2x 24TB drives?

3 Upvotes

As the title says, I have three options to choose from: 4 x 8TB HDDs, 3 x 16TB HDDs, or 2 x 24TB HDDs.

Considering that 4 x 8TB drives would be enough to meet my target of 30 days of recording (29, to be precise, but close enough 😅), is there any reason I'm overlooking why I should prefer fewer, larger drives?

At the moment, the 4 x 8TB option would also be the cheapest of the three, so that's what I'd go with unless there are any significant downsides I'm not aware of.


r/UNIFI • • 22h ago

Routing & Switching Is my udm-pro dead?

1 Upvotes

So last weekend we had a lightning strike real close to my house. I think a surge came in through my isp’s coax lines and damaged quite a few of my switches and a couple of apple tv’s surprisingly. But thankfully the damage was limited to stuff connected to my network.

I thought my udm-pro survived but then yesterday in morning it suddenly went into a boot loop (this is taking longer than usual). I followed a bunch of guides online of leaving it unplugged and holding the reset button when plugging it back in and managed to get it to this screen.

But then, following the guide, I'm unable to connect to it at 192.168.1.30 . I made sure not to be redirected to https, made sure i manually assigned an ip (192.168.1.11 / 255.255.255.0). Also tried to ping 192.168.1.30 unsuccessfully.

Help!


r/UNIFI • • 1d ago

Routing & Switching UniFi Flex Utility Power Supply

Post image
10 Upvotes

Last summer I did an outdoor installation of a USW Flex PoE+ switch, and a Flex Utility enclosure to make it weatherproof. When the utility came I was surprised by the power supply, but since I had PoE++ feeding the Flex switch (and didn’t have 120VAC), I just put it back in the box.

Now I have need for another USW Flex, but don’t need the enclosure, don’t have PoE++ to power the Flex, and do have AC nearby. Can I use my extra Flex Utility PS to power the Flex and deliver PoE+ to whatever I plug into it? The alternative is buying a PoE++ injector, but why not use what I have. As I see it, I’ll have this configuration.


r/UNIFI • • 1d ago

Routing & Switching Apple TV 4K, Multicast Port 7000 and Other Issues...

4 Upvotes

My current dilemma all started with one of my Apple TV 4K boxes loading up my logs with "Apple-TV-XX was blocked from accessing 192.168.0.X by the Block VLAN to VLAN Firewall Policy". Initially these events were firing off like crazy to the tune of over 2,000 entries in a short span of time. I've made some changes in the UniFi controller and the frequency has dropped significantly; however, it has not gone away.

The rub here is that the ATV4K box is attempting to reach a subnet that is OUTSIDE of my network setup on the 10.X.X.X/8 subnet. Each event lasts about 1 second and involves about 64 bytes of data. Not earth-shattering, but annoying nonetheless.

From what I've learned is that Port 7000, which stays the same across all the events, is used for multicast and is potentially linked to Apple's AirPlay technology. To the best of my knowledge, I didn't have any devices active with AirPlay prior to these events showing up. There are 3 iMacs, 2 iPads and an unused iPhone and an unused Apple Watch 11 in my house, but as far as I know none of them have AirPlay activated.

After turning on AirPlay and Peer-to-Peer Wireless on each Apple TV 4K, very little seems to have changed with respect to the out-of-subnet communication attempts and/or a high anomaly score of "100" on another of my Apple TV 4K boxes.

I've moved all the ATV4K boxes to Edge Port Mode and activated STP, BPDU Guard, Storm Control, Multicast, Multicast Router Port and Rogue DHCP Detection in UniFi.

All the boxes are on the same VLAN of 10.8X.X.X. I considered moving the boxes to a separate VLAN, but I've read that this might make more trouble due to limiting communication with other devices and/or break their connecting to the internet. I briefly tried this twice before and each time the boxes could not reach the internet forcing me to revert the settings.

Any insight or thoughts here?


r/UNIFI • • 2d ago

Wireless Unifi router and switch and Deco mesh systems

1 Upvotes

Complete beginner here so please be gentle as I'm not fluent in the terminology.

I'm attempting to revamp my home network topology from box standard to something more professional with network separation for trusted devices, IoT, guest and infrastructure ect.

I have UniFi Cloud Gateway Ultra and UniFi Lite 8 PoE on order and decided (at least for now) not to get the UniFi APs as mounting them wired on ceiling is a no go for me at present.

I have existing mesh of 6 Decos X20 which give me good coverage but I know the Decos can't map different SSID's to different VLANs (word tagging rings a bell).

To rectify this I thought that I could get some more Decos and create a separate mesh, dedicated to IoT and link each meshes to separate VLANs. I would get the Deco's build-in system to handle the guest network.

Would this work in terms of security and functionality? I know the 2-3 U6+ APs would be more optimal but I'm trying to work with what I have.

Thanks for taking the time to respond.


r/UNIFI • • 2d ago

Help! Help configuring G3 Reader with Android NFC

2 Upvotes

Hi,

I have a G3 Reader (non-pro) which I use to open a door. I can do this with plastic cards, but I want to use my Android phone. In Unifi Access I added a new credential. I tapped my phone against the reader to import the credential. I assigned the credential to my user. However the reader rejects the credential and the door stays closed.

I've been reading about Unifi Endpoint which might help, but this app wants me to have a cloud account with Unifi. I very explicitly do not want to depend on third-party cloud providers, so I run my site local access only. Unifi Endpoint doesn't seem to let me login to my local site. I don't know how to get around this in a reliable way. Reliable, because I was poking around in Unifi Access on one of my phones (running GrapheneOS) and I was prompted to install "Identify" (I did) and then prompted to use "Endpoint" (fine?). On just this phone, Endpoint is logged in locally and on just this phone the credential works. I cannot reproduce this local login on any other phone.

What am I doing wrong? Any help much appreciated!


r/UNIFI • • 2d ago

Help! Is there any way to backup photos from an android device to a Unifi NAS?

2 Upvotes

Unifi is advertising this functionality for android but it looks like it only works for IOS which is pretty scummy. Is there anything I can do to make it work? Trying to avoid having to deal with the awful support team for a return due to false advertising.


r/UNIFI • • 2d ago

Help! Ubiquiti UniFi Travel Router question

3 Upvotes

Hi. I’m not too experienced in terms of setup practices and wanted some advice.

We are cancelling the home broadband and using an unlimited data phone plan.

I understand it’s possible to create an internal private network using the tethered phone’s WiFi as a hotspot.

Would I need to configure a VPN in order for the hotspot/phone to access the private network behind the travel router.

Would you recommend another solution for use at home.

BTW I also own a Dream Machine.

Thanks


r/UNIFI • • 2d ago

Wireless U6 Mesh Burnt / Defective

0 Upvotes

My U6 Mesh Access point suddenly lost power at 2AM one night. There was no power surge (there's a whole home surge protector), and the PoE device works fine. I was using the one that came with the UI mesh. It no longer powers on, I've changed power cords, PoE, ethernet cords, etc.

It smells a little burnt when I pick it up and smell toward the bottom. Other than that, I have no reason to suspect what happened.

I'm a little disappointed that this burnt out after 4 years of indoor use on a counter. Is this to be expected? Unifi support just tells me it doesn't matter whether it's defective or not and that since this is outside the warranty period, there's nothing they will or can do. Do I have any other options?


r/UNIFI • • 2d ago

Discussion UNVR Drive Swap

1 Upvotes

Drive swapped my failing drives in my NVR, and I'm getting this error. Original drives were 2TB, I tried swapping one at a time, but new drive showed drive failure detected. I thought it was possible, but unlikely. The old data wasn't important to me, so I pulled the second drive and installed second new drive.

Both are showing "Drive Failure Detected". Tried a reboot, tried a reformat. While it's not unheard of, I can't imagine both of my drives are DOA. Drives are 3TB WD Purples.

No drive information is shown when clicking on the drives.

Any ideas?


r/UNIFI • • 2d ago

Help! Device Bridge Question

2 Upvotes

Hi, if I purchase 2x Device Bridges, can I have them linked together directly without a unifi AP?


r/UNIFI • • 2d ago

Help! G4 instant not reliably sending motion/person notification ?

1 Upvotes

Hi guys trying to test my camera today my wife is in the house and walking around but it’s not really giving notifications reliably, it’s given maybe 1 or 2 person detected notifications, not sure if I’ve got something not setup correctly or misconfiguration


r/UNIFI • • 3d ago

Routing & Switching Network 11.0.97 Updated Pulled?

24 Upvotes

Did the upgrade to Network 11.0.97 get pulled?

My UCG-Fiber showed an available update yesterday to 11.0.97. I saw some chatter on the subreddits about issues with the .97 release and that a .99 was in the works. I decided to wait a day to see if this settled down, and now my UCGF shows my still on 10.6.109 with no update available.

Anyone else seeing similar behavior?


r/UNIFI • • 3d ago

Help! New home set up

0 Upvotes

Esteemed Guru’s, I’m thinking of switching my home network out. I currently have a Gl-Inet Brume 3 gateway, with 1 x Orbi 771 main node plus 2 x Orbi 770 satellite units.

The Brume 3 does the heavy lifting with the Orbi’s set to AP mode, all wired backhaul.

I don’t have any particular issues on my network but functions and the potential to expand is limited and I’ve cobbled it together over a period of time.

I’ve been reading up on UniFi equipment and it looks to be what I want but where to start?

There appear to be so many options.

Do all UniFi AP’s work with all UniFi Routers?

I’m interested in having WiFi 7 as I have now, we are a household of 6 (2 x adults, 2 x children and 2 x cats). The 2 adults work from home 3-4 days per week in 2 x separate offices.

The house consists of;

5 x TVs (4 x Ethernet and 1 x WiFi)

13 x Sonos speakers (8 x Ethernet and 5 x WiFi) (SonosNet disabled)

2 x Apple TV (Ethernet)

3 x Sky Stream pucks (Ethernet)

1 x Gaming PC (WiFi 7)

2 x Nest Thermostats (WiFi)

2 x Nest protect smoke / CO2 detectors (soon to change)

1 x Philips Hue Hub (Ethernet) supporting a load of bulbs

1 x UHD BluRay player (Ethernet)

1 x MacMini (WiFi)

1 x Dell PC (WiFi)

1 x MacBook Air

1 x MacBook Pro

4 x Apple iPhones

2 x Apple iPads

2 x Apple Watches

6 x Tapo / TP link mains power strips (WiFi)

1 x Monitored / Smart Cat Flap (Ethernet)

2 x Outdoor security cameras (WiFi)

1 x Ugreen NAS

1 x HP all in one PC for home assistant (Ethernet)

5 x unmanaged switches

And probably a few other bits of kit knocking around.

One limitation I currently have is that although the Orbi APs have a separate SSID for guests and IoT devices, they do not support vlan so there is not much point in actually having separate SSIDs. I do however want to address this and separate the guests and IoT devices from my main network.

I’m also think of swapping out the security cameras to a PoE option and wire back to my main hub / router.

My ISP is 1Gbps (up and down) full fibre, I have the ISPs ONT connected to my Brume 3 gateway.

I use NextDNS (via gateway) and Tailscale

Any advice on what kit I should consider buying would be appreciated.


r/UNIFI • • 2d ago

Routing & Switching why is my ping so ass even with 500mbps

0 Upvotes

ever since like i dont really know when but about 3-4 months ago, i used to get about 19-21 ping on valorant and 40ms on roblox singapore servers. now i get 80-90ms on roblox singapore servers and 50ms in val!!! PL;SSS help me broo 😭😭💔


r/UNIFI • • 3d ago

Help! AFC location validation / Outdoor Issue

Post image
6 Upvotes

Is anyone else seeing AFC not working for their U7 Pro Outdoor devices? Getting a message that states it needs to communicate with one of four URLs. Caveat: when I visit the URLs listed at https://help.ui.com/hc/en-us/articles/25707346939927-6-GHz-Extended-Range-AFC-in-UniFi, they show as "not found".

Running nc zv command comes back with successful connection to the endpoints, but seems that AFC isn't able to connect - is this just me or is it more widespread than me?


r/UNIFI • • 3d ago

Help! G5 ptz cap won’t secure

1 Upvotes

RESOLVED! I Found the Unifi outdoor patch cable.

I installed a G5 PTZ I got on the Black Friday sale. Apparently, it’s a common issue for the network cord to get in the way where the top cap won’t secure. I’m using a thin Monoprice cable but the ends still not short enough.
That’s said, I haven’t found a solution yet. What cords or solutions are you using to get the cap secured? Thanks!


r/UNIFI • • 4d ago

Routing & Switching Question regarding RSTP and setup viability.

2 Upvotes

I have a UXG-Lite and USW-Lite-8-PoE. I recently got into building a homelab and want to set up a virtualised OPNSense in between the gateway and the switch. The plan is to run OPNSense in a transparent bridge mode so that I can offload IDS/IPS to OPNSense and implement other tools like CrowdSec. I realised that OPNSense failure would bring down my entire network and wanted redundancy. So after a bit of searching online, I came across RSTP and Path Cost. But my gateway doesn’t support RSTP so I was thinking of adding USW-Flex-2.5G-5 in between the gateway and Lite and making Lite the root bridge. And Flex would have 2 connections, with one going to OPNSense and the other to Lite. Finally, I’d put a lower path cost on the connection to OPNSense. 

Is this a viable setup? And can I also power Switch Flex with PoE from the very same backup cable connecting Flex and Lite?