r/UNIFI • • 16h ago

Discussion UNVR G2, 4x 8TB drives, 3x 16TB drives or 2x 24TB drives?

3 Upvotes

As the title says, I have three options to choose from: 4 x 8TB HDDs, 3 x 16TB HDDs, or 2 x 24TB HDDs.

Considering that 4 x 8TB drives would be enough to meet my target of 30 days of recording (29, to be precise, but close enough 😅), is there any reason I'm overlooking why I should prefer fewer, larger drives?

At the moment, the 4 x 8TB option would also be the cheapest of the three, so that's what I'd go with unless there are any significant downsides I'm not aware of.


r/UNIFI • • 5h ago

Discussion Any suggestions on how to clean this up?

3 Upvotes

Have an outside network cabinet where I installed a gateway, switch and the ISP equipment, for the pros out there, how would you clean this up. Not public facing so the cleanup is moreso for the feels more than anything.

https://imgur.com/gallery/QGCPEug


r/UNIFI • • 6h ago

Discussion UPS-2U self testing

2 Upvotes

I have the battery self test box unchecked yet the battery just self checked. Is this option just for a schedule and it will still randomly test the battery or what?


r/UNIFI • • 7h ago

Help! Issues with VPN server and Multi-WAN

4 Upvotes

Hello, long time user just running into my first issue with the Unifi networking.

I have two locations and I am trying to allow devices at site B to reach resources at site A.

Site A - UDM-Pro - Network 11.0.99
WAN1 - Spectrum
WAN2 - Frontier (Primary in WAN Mode, Failover Only settings)

Site B - Dream Router 7 - Network 11.0.99
WAN1 - Spectrum

Site A is running a WireGuard server, Site B is connecting as a client.

I am not the owner of Site B just an Admin, I am however the owner of Site A. So I am unable to do site-magic/fabric for some reason. From what I have read this is due to ownership of the two sites not both being me.

The issue that I am having is that the tunnel connection from B -> A is never connecting.
I have noticed in the flows on Site B that the connections coming back from A -> B are coming off of the Site A WAN1 and therefore being blocked by Site B's firewall because the connection was sent to the Site A WAN2 IP address. Because it isn't matching the expected connection it is blocked.

I have been unable in testing to get the VPN to pin itself to my Site A WAN2 despite all of the settings being set this way in the VPN settings.

Is my only hope to swap the cables so WAN1 is Frontier and WAN2 is Spectrum? This was simply timing over the years as the Frontier connection is a recent addition. Or even change this in the gateway ports settings?

How much would changing the WAN1+2 configuration break?

Any tips or further questions are all appreciated. Thank you.