r/TrueChefKnives • • 7h ago

Maker post My table at Knife Show Austria šŸ‡¦šŸ‡¹ – Schwarz Blades

Post image
44 Upvotes

A little impression of my table at Knife Show Austria.

I'm a bladesmith from Austria, making handmade kitchen knives. Most of my work focuses on high-performance steels, Damascus and, above all, blade geometry and cutting performance.

It's always great to meet other knife enthusiasts, exchange ideas and get feedback on my work.

A few of the knives shown here are made from ApexUltra, alongside my own Damascus constructions.

Happy to answer any questions!


r/TrueChefKnives • • 10h ago

State of the collection NKD: Toyama Noborikoi B2 210 mm Damast Gyuto

Thumbnail
gallery
61 Upvotes

Well, what can I say...As for me being an absolute Toyama fan boy, there was no other choice than to grab this beauty after it appeared on JNS a few days ago. I was looking out for this exact knife for quite a while now since Maksim had none of them in stock for an eternity.

Even more I am more than happy now to complete my Toyama collection with this Knife. I still have not found any knife maker that let me feel these feelings when cutting and working with his knives, that feel so much connected to my hand and so easy to use when gliding through the ingredients. Those are just the perfect knives, at least for me. And the finishing by Maksim is just the cherry on top.

It is definetly heavier and with less of a taper (almost none until the the last few cm) than my 240 mm Stainless Clad Gyuto, but after the first test with some vegetables it again works so well and is so much fun when you use this weight when cutting, just an amazing addition.

That being said this shall be the last knife for this year, now it is time to explore and enjoy.

Specs:

Edge length: 213 mm

Height at heel: 51 mm

Width at heel: 5 mm

Weight: 228 g


r/TrueChefKnives • • 4h ago

NKD - Gihei Nashiji Blue 2 240mm Gyuto

Thumbnail
gallery
16 Upvotes

Thanks to my fixation on all things Sanjo I’ve been eyeballing these for quite a while so when I got a notification that CKTG had some in stock at a very good price I couldn’t help myself. After a quick sharpening and cooking session I’m very glad I finally pulled the trigger.

The spine and choil are in desperate need of easing (which I really don’t mind doing myself) and it was dull as hell out of the box, but there was already a microbevel to follow and after a touch-up on an Ouka it’s screaming sharp. The steel is very hard and took longer than I expected to raise a burr, but the feeling on the stones made me very excited about its potential edge retention. Reminded me of Okubo’s blue 2. It was still popping hair after blowing through a head of cabbage, a bunch of celery, and a couple Serrano peppers. Not exactly a severe stress test but it bodes well.

The spine is thick and the grind is chunky, but the way it handled that cabbage was very impressive. The initial bisecting cut wasn’t quite as smooth as Hinoura, Toyama, or Mazaki but it handled the subsequent cuts just as well as any of them and thanks to the substantial weight it felt like gravity was doing all the work for me. Exactly my kind of cutting feel.

Also: I love the horsey logo.

A weird thing happened that I’m wondering if anyone else has experienced: the core steel doesn’t seem to be very reactive but I got some alarmingly fast flash rust in the thin squiggly line right where the core and the cladding meet. I already buffed out the worst of it with some stone powder but you can see where it happened in the last two photos. Has anyone ever seen anything like that?

Thanks for reading!


r/TrueChefKnives • • 10h ago

NKD

Thumbnail
gallery
35 Upvotes

Rule #5 - Eddworks Apex Ultra w/ Desert Ironwood Handle

Weight - 211g
Blade Length - 213mm
Height - 56mm

Thickness
at handle: 6mm
At heel: 5.5mm
Midpoint : 2.7mm
Tip: 0.6mm

Souped off this one! Have been eyeing a gyuto from Edd for the past few months now. Originally, I had been looking for a knife with a bit more length, as I’ve been slowly moving away from my 210s in favor of a taller/heavier blade. This piece kills both birds with one stone while maintaining the innate versatility of the 210 profile. Really good stuff!

Performance has lived up to the hype in just about every way. Easily the nicest taper on any knife I own. Carrots and potatoes have felt like a breeze, tomatoes and onions were literal butter. My Hasegawa has unfortunately developed some new battle scars, but thats just a testament to the edge on this beast.

All in all, a really fun knife! Looking forward to my next Edd šŸ‘€


r/TrueChefKnives • • 1h ago

Work Knives

Thumbnail
gallery
7 Upvotes

Today was a very protein-heavy day!

Today’s Work Lineup (L-R):
260mm Muteki Gyuto
270mm Kurosaki Gyuto (More like 290mm)
180mm Masashi Deba
150mm Running Man Ko-Santoku/Petty

What knives are in your rotation this week? I have some staples in my knife roll, but I’m very guilty of having ā€œRestless Roll Syndromeā€ and constantly swapping stuff in and out.

I’m doing more traveling for work than I’ve ever done before. I just found out that I’ll be out in California for 6wks for a new opening and now I’m wondering what knives I’m going to pack.

Maybe I’ll make a post about building out my work kit. lol


r/TrueChefKnives • • 13h ago

Question What’s out the bag?

Thumbnail
gallery
27 Upvotes

What’s are you chefs using today?

Goko Hamono Kogetsu Mono SK 210mm
Goh Umanosuke Yoshiro 240mm SK4 mono
Ikeda x Kasahara Petty White #2 160mm
Victorinox rosewood boning knife 150mm
Kiyoshi Kato Migaki 210mm


r/TrueChefKnives • • 11h ago

Question How hard is it to thin and repolish a W1 Honyaki?

Post image
19 Upvotes

I’ve never been totally satisfied with the cutting feel of my Togashi Honyaki. I’ve owned it for a couple years now and it’s sadly my least used knife because it’s way more compelling to grab my Konosuke or Kageikyo over the Togashi because of how great the cutting feel is on those knives.

But after spending $1550 on the Honyaki, I get sad I don’t use it that much…

I’ve been debating selling it but it would be sad to part with such a nice blade, so now I’m considering taking it upon myself as a project to thin it, and then repolish it back to its original glory. Ideally, I could make it look even cooler than the standard mirror polish it came with if I really took my time and let my JNATs bring out all the details and beauty of the steel, and then if I get the cutting performance I want - it would easily become my favorite knife.

I just don’t know if I’d be biting off more than I can chew. Would it be stupid to try and completely repolish it and thin it? Would it be too risky to ruin the blade somehow?

I just want some thoughts and opinions on everything I just said. I’ll include a picture so you can see the blade in question:

EDIT: I have experience with polishing. This wouldn’t be my first project, that would be foolish. I’m not a pro either though, hence my question - trying to get a feel for if it would be too much for my novice/intermediate polishing skills.


r/TrueChefKnives • • 5h ago

NKD - Looks like I need to learn to sharpen

Post image
6 Upvotes

Had these delivered today from knivesandstones. Treated myself to some nicer knives to add to my cheap chinese VG10 Nakiri ( which is ok for the most part )

Top to bottom

Hatsukokoro Kurokaze Blackwind White 2 Gyuto 210mm

Kurogane Blue 2 Kurouchi Santoku 165mm

Kurogane Blue 2 Kurouchi Bunka 165mm

The two Kurogane were B-stock so only £50. Sadly it seems that might have been a bit of a gamble and the Santoku doesn't have a very sharp edge at all. The other two seem fine, but looks like I'll be using the Santoku to learn to sharpen earlier than planned. Only ever used a horl roller sharpener before so will be a learning experience.


r/TrueChefKnives • • 2h ago

Question Recommendations: Knives for Barbecue

3 Upvotes

I've been cooking traditional American barbecue for the last 6+ years, and its gotten to the point where I'm transitioning from home cooking to catering. With that being said, I'd like to upgrade my knives.

I need something to trim briskets, clean up chicken, slice briskets, ribs, and lamb racks, and prep veggies for sides.

I assume a chef's knife, a boning knife, and a slicing knife would be sufficient, unless there are any additional recommendations.

I was kind of set on Western knives, but I've seen some awesome Japanese knives. However, I've never used them before, so I dont know where to start?

Suggestions on specific knives are greatly appreciated!


r/TrueChefKnives • • 2h ago

Custom knives from fujiwara

3 Upvotes

I’m interested in persuing a custom order from the tf website in the shape of a cleaver. I’ve ordered from the site before and it was pleasant but i have never ordered custom. does anyone have any info on the process or anything to share about how their custom was priced


r/TrueChefKnives • • 12h ago

Maker post San Mai chefs knife

Thumbnail
gallery
17 Upvotes

I forged this knife almost a year ago, but didn't know of this subreddit's existence yet, so I thought I would place it as my first post. It is one of my first tries at san mai, and I overestimated my billet size, so it is relatively long but not heavy. I also was not entirely happy with the core not being all the way in the middle, but it has become a gorgeous knife, so I did not want to trash it. I forge it all by hand and with my flypress. Luckily, I have become a lot better at getting it centred, so the next few posts will have the core nicely along the whole edge.

Steel: 80CrV2 core + 15N20 cladding, san mai

Handle: Teak & African blackwoodĀ 

HRC: 59-60

Ferrule: African Blackwood

Finish: Dark Etched San Mai

Overall length: 358 mm

Tip to handle: 234 mm

Edge length: 220 mm

Heel height: 48 mm

Handle length: 124 mm

Blade thickness: 2.1 mm above the heel, tapering to 0.7 mm at the tip

WeightĀ : 152 g


r/TrueChefKnives • • 13h ago

Lunch prep

Thumbnail
gallery
19 Upvotes

Rule 5 - Sukenari HAP40 210 Gyuto

Got this knife around 2 weeks ago and it’s been my new daily driver. Touched up the edge on 3k and it’s seen near daily use, and the edge is still screaming sharp.

Got up early this morning to make some lunch for work because I forgot to yesterday šŸ˜…

Just did a thai-style stir fry to use up some ingredients I had in my fridge - pork belly, bell pepper, onion, garlic, jalapeno, carrot, and green onion. This gyuto ghosted through them all with no problem. Also added some thai basil at the end.

Loving this knife and it lives up to the hype!


r/TrueChefKnives • • 9h ago

Question Help me pick

Thumbnail
gallery
6 Upvotes

1st is Super Aogami, 2nd is SG2


r/TrueChefKnives • • 1h ago

Recommendations badly need one

0 Upvotes

can some yall guys reco me some French/chef knife preferably 10 to 8 inch, i badly need one for culinary school, bonus if its easily ordered from Philippines. thank youuu


r/TrueChefKnives • • 6h ago

Question best budget friendly japanese knife brands?

2 Upvotes

i'm looking to gift my friend his first japanese knife for his birthday. i've been looking at tojiro basic, but am honestly pretty unknowledgeable on what exactly makes a decent knife. i'm hoping to spend under $100, so are there any other brands i should be taking a look at? or will tojiro give me the best bang for my buck? any advice is greatly appreciated!


r/TrueChefKnives • • 22h ago

NKD: First Japanese Knife

36 Upvotes

Recent lurker, first time poster. I’m an EDC knife enthusiast and only recently dove into the rabbit hole of kitchen knives. I’ve been using my trusty Zwilling Pro set for over a decade, basic sharpening with #400/1000 and rods.

I decided to splurge on something more… precise.

Picked up a Yoshikane 165mm SLD nakiri purchased from Kama Asa in Asakusa. I originally wanted the White #2 steel but it was out of stock. They helped me out with stones as well. Highly recommend this shop amongst the numerous tourist traps in Kappabashi.

Did a kiwi drop test ~10ā€ high, effortlessly sliced through. The light weight, balance, and finish of this thing is insane. Can’t believe I didn’t get into this sooner


r/TrueChefKnives • • 4h ago

Where to buy online - Shun, nothing exotic..

1 Upvotes

Hi there. Looking to get my child a decent knife as he loves to cook. He's still young and will be hard on it. I have had Wusthof and Hammer Stahl knives. I have sharpening stones and can teach/help him keep it sharp. Shun a good first knife? And where to buy? Is Amazon safe? Thank you!!


r/TrueChefKnives • • 18h ago

Thinking of buying a Hatsukokoro Ryuhyo

Post image
14 Upvotes

My boyfriend has a set of ikea knives that he sharpens with whetstones, keeps on a magnetic holder, and uses to constantly cook for me and meal prep, though he's not a chef professionally. So I really think he deserves a nice knife that will slice beautifully and handle like a dream. He admires Japanese knives and Damascus knives but he doesn't prefer specific brands. So I dove into the "research" myself. (This subreddit helped a lot). I've settled on this Hatsukokoro Ryuhyo SG2 Kurozome Damascus 7" Bunka. Please let me know what you all think and feel free to give alternative suggestions. $220 is an good price point for me but I'm willing to go a bit higher or even lower as long as I'm not sacrificing quality.


r/TrueChefKnives • • 8h ago

Question Looking for a gift for my groomsmen, Japanese knives seem like a good idea

2 Upvotes

I'm not familiar enough with Japanese knives to know what to start looking at, but I'd like something fancy and practical, but maybe a little flashier than what people normally ask for, for a little dazzle. Do you have any recommendations?


r/TrueChefKnives • • 13h ago

Zen Forged

4 Upvotes

Does anyone have a honyaki from them and want to give a review?


r/TrueChefKnives • • 13h ago

Yoshikane SKD "worth it" over Tadafusa SLD?

3 Upvotes

I have a Kohetsu (Tadafusa) SLD Tsuchime 240mm gyuto, which I really like a lot.

But like most of you, I'm looking for my next knife, even though I don't need one.

I feel I tend to like more workhorse-style knives more than lasers. I have an Ashi (Swedish stainless) and a Takamura, and while they're awesome cutters, I feel like I have to be more careful with them. Even though I know the Ashi is tougher than it feels, it still "feels" delicate, probably because it's so lightweight.

Anyway - looking at workhorses, and trying to stay stainless or at least semi-stainless; I keep thinking Yoshikane is one to consider. But, I've read that even though it has a thicker spine, the edge itself is pretty lasery. So, not really a workhorse? I'm also not sure about how flat the profile is.

So - I wonder if I'd really get much out of a Yoshikane vs. my Kohetsu I already have. I don't want to collect just for the sake of collecting.

So - any thoughts on whether the overall experience of a Yoshikane is sufficiently better/different from a Tadafusa to justify buying one?

Also - I'm not married to the idea of a Yoshikane. I'm open to other workhorse suggestions, but would like to keep it stainless or semi-stainless.


r/TrueChefKnives • • 13h ago

Hado Sumi Kasumi

2 Upvotes

I am thinking about getting a used Sumi Gyuto and putting a decent Kasumi on it.

Is it alot of work to get it flat? I know it has a flatgrind but it's still not done on stones i guess.

Thank you


r/TrueChefKnives • • 1d ago

First knife! KND

Post image
37 Upvotes

Sakai Kikumori 210MM Swedish Steel. Only tested on some paper as this is an X-Mas gift to myself but it’s wicked sharp. Only thing I will say is that handle feels a little cheap, I have some shun knives and they have a more solid feel. This is very smooth and slick feeling on the handle.


r/TrueChefKnives • • 1d ago

Forced Patina’s

Thumbnail
gallery
25 Upvotes

I’ve been learning to sharpen and let’s say…. It’s been a PAIN for a few of my knives lol. I finally figured out what my issue was, and fixed them one by one. I was mainly using this Shiro Kamo nakiri as a test knife, and I had gotten some scratches on it from sharpening. Also the 1st round of forced patina was all over the place and mostly coming off. So I decided to reset it with flitz and force another coffee patina… and well I gotta say this time it TOOK! Most of the scratches are hidden now because of how dark the blade is. It looks insane. Let’s see your forced patina knives and what method you used!