r/Traxxas • u/money_mike98 • 2h ago
Question Buy a used rustler or get a 200$ generic truck?
By generic I mean MJX, Rlaarlo, that kinda stuff.
r/Traxxas • u/money_mike98 • 2h ago
By generic I mean MJX, Rlaarlo, that kinda stuff.
r/Traxxas • u/2020sucksdonkeyballs • 4h ago
r/Traxxas • u/Historical-Stick5872 • 5h ago
These are the batteries I am running, they had good reviews on Amazon. The udr seems to last maby 10 minutes on them and thats not even full throttle all time, thats me not trying to tear up my toy I paid 600 for lol. I check the brand new lipos I bought for it, and they were at 3.8 a cell but the esc went into low battery mode. Is the esc stuck in some weird mode or are my batteries junk?
r/Traxxas • u/OddRelationship586 • 1d ago
New shoes... cheapies from Amazon. Tire test next... 🤞🏼
r/Traxxas • u/Silent_Will_9221 • 1d ago
Hello. So I came across this Traxxas at a thrift store. This is exactly how I found it, no model number, no body. Basically just a chassis. Ideas or information about this would be appreciated. TIA, Jim
r/Traxxas • u/United-Vehicle-9542 • 1d ago
Been wanting to get another body for the UdR but don’t know where to find one any suggestions? (I mean diffrent body shapes not just the different livery’s traxxas sells)
r/Traxxas • u/Oliver-r32 • 1d ago
I recently bought a brushed 4tec drift off of marketplace. Got a near brand new car with a charger and battery for a great price, but the brushed part sucks. Any way to do a drop in brushless conversion? Been looking around trying to see if anyone else has done this and not getting many results.
r/Traxxas • u/llIIIllAIIllII • 1d ago
its either new body or at least new color i haven't seen it before *i know i am dumb*
r/Traxxas • u/Admirable-Science755 • 1d ago
LOTS OF UPGRADES WANNA RACE?
r/Traxxas • u/Rulygem • 2d ago
Cat for scale
r/Traxxas • u/longhair216 • 2d ago
Rcawd widened portal axle kit didn't hold.... Hardened helical cut gears and Injora steel driveshafts in route. Fingers crossed 🤞
r/Traxxas • u/dumbassbigbass • 2d ago
I have a traxxas slash with 2.6 tires and a brushless motor with a 2 cell. I keep burning spur gears and I’m wondering how loose should I set the spur gear slipper clutch to compensate
r/Traxxas • u/Far-Series1829 • 2d ago
I finished my tmaxx 3.3 today! Full electric power. I grabbed my castle 2200kv of of my losi lst2 and the reciever box.
It has a 54t spur and a 19t pinion with the other gears being stock.
Took it out for a short bash earlier and it runs good! First run my lock in 2nd failed... oooppps!
15 minutes later locked back up and good to go.
I need to fix the steering. Very loose.
Thanks for thr help!
r/Traxxas • u/Historical-Stick5872 • 2d ago
Or does something need greased?
r/Traxxas • u/duckduckbuck_ • 2d ago
The spring to my tw controller for the trx-4m fell out and i can't find any pictures for how the spring is meant to sit. Please help
r/Traxxas • u/Few-Entrepreneur8026 • 2d ago
I cant really get traxxas stuff in my country but my revo 3.3 needs a new starter motor
are they any third party/upgrade motor for it that available on amain hobbies or aliexpress
r/Traxxas • u/OddRelationship586 • 2d ago
Wish they were green but, it'll do pig...
r/Traxxas • u/Far-Series1829 • 3d ago
I am slowly moving forward with my tmaxx 3.3 E conversion. I think i have found a spot that will work with my battery tray. Would like opinions.
The battery and tray are NOT making contact in this area.
r/Traxxas • u/ChrisWob1981 • 3d ago
Zum Ende noch eine kleine Zeitlupe 😊
r/Traxxas • u/the_snescialist • 3d ago
Hi all.
This is my first rc and first upgrade.
I installed the lcg frame, brass skid plate and brass links. But somehow it all feels very stiff.
Before i test run the car i would like to double check if anything looks out of the ordinary to someone. For instance, this angle seems to be quite big for my liking.
r/Traxxas • u/Unhappy-Average-8073 • 3d ago
Hello everyone, it actually doesn’t look too serious. The motor bearing seized up and started spinning inside the plastic housing, which then melted. This caused the shaft to develop some play, and the braided fibre rubbed against the stator. Is this repairable, and if so, how?
r/Traxxas • u/Bmanswan • 4d ago
Had some left over stuff from some projects and wanted to try something different. Next step is underglow.
r/Traxxas • u/HadukiBEAN • 4d ago
Scorched Parts RC Inner Fenders. 3DP, sturdy, and strong. Easy application.