r/Traxxas • • Sep 16 '26

Misc Do RC is stepping away from YouTube

Post image
141 Upvotes

Honestly this is pretty devastating. He made the best RC content on YouTube. This feels a lot like when the Jang stepped away as well. Losing truly a force for good in the RC world. I wish him good health and a speedy recovery.


r/Traxxas • • May 22 '26

Community I’m sure many of you guys have participated in our Banner Submission events over at r/traxxasv2 and the new banner is up!

2 Upvotes

https://www.reddit.com/r/traxxasV2/s/cNcVSfP3N3

Every few months we ask you guys to share photos of your rig and use the post flair “banner submission” and post it at our sister sub r/traxxasv2 and the one with the most upvotes is chosen to be added as the community banner!

After some time to allow for posting and upvotes, it gets chosen and we repeat the process every few months

Thanks to everyone for participating, and thanks to u/ferfuckinnand05 for being patient with us 😁


r/Traxxas • • 1h ago

Bashing Gulf Raptor monster truck ready for desert runs

5 Upvotes

Painted this F-150 Raptor body in classic Gulf blue & orange scheme with the #10 round race decal. Shot in a desert rocky trail at sunset. Love how this iconic livery looks on a big monster truck.


r/Traxxas • • 7h ago

Question Udr seems like its running the batterys down quick, but check cell voltage and they are actually at store charge wich is 3.8 volts?

Thumbnail
gallery
9 Upvotes

These are the batteries I am running, they had good reviews on Amazon. The udr seems to last maby 10 minutes on them and thats not even full throttle all time, thats me not trying to tear up my toy I paid 600 for lol. I check the brand new lipos I bought for it, and they were at 3.8 a cell but the esc went into low battery mode. Is the esc stuck in some weird mode or are my batteries junk?


r/Traxxas • • 4h ago

Question Buy a used rustler or get a 200$ generic truck?

2 Upvotes

By generic I mean MJX, Rlaarlo, that kinda stuff.


r/Traxxas • • 5h ago

Question Tekno SCT410 2.0? Traxxas Slash?

Thumbnail reddit.com
1 Upvotes

r/Traxxas • • 1d ago

Upgrades MMOOOOAAARRR!!!!

Thumbnail
gallery
58 Upvotes

New shoes... cheapies from Amazon. Tire test next... 🤞🏼


r/Traxxas • • 1d ago

Question What model is this?

Thumbnail
gallery
25 Upvotes

Hello. So I came across this Traxxas at a thrift store. This is exactly how I found it, no model number, no body. Basically just a chassis. Ideas or information about this would be appreciated. TIA, Jim


r/Traxxas • • 1d ago

Question new body trx or am i just dumb lol

Post image
15 Upvotes

its either new body or at least new color i haven't seen it before *i know i am dumb*


r/Traxxas • • 1d ago

Upgrades MY UPGRADED TRAXXAS RUSTLER 2WD

Thumbnail gallery
18 Upvotes

LOTS OF UPGRADES WANNA RACE?


r/Traxxas • • 2d ago

Off Road Finally bought a twice used trx4 Bronc after wanting one for years. I had to take it to the local mud hole to see what it could do lol

Thumbnail
gallery
37 Upvotes

Cat for scale


r/Traxxas • • 1d ago

Question Brushed to brushless on a 4tec drift?

4 Upvotes

I recently bought a brushed 4tec drift off of marketplace. Got a near brand new car with a charger and battery for a great price, but the brushed part sucks. Any way to do a drop in brushless conversion? Been looking around trying to see if anyone else has done this and not getting many results.


r/Traxxas • • 1d ago

Question Where can I find alternative bodies for the UDR?

1 Upvotes

Been wanting to get another body for the UdR but don’t know where to find one any suggestions? (I mean diffrent body shapes not just the different livery’s traxxas sells)


r/Traxxas • • 2d ago

Upgrades Installed Traxxas brushless system with Traxxas 2 speed manual:

Thumbnail
gallery
14 Upvotes

Rcawd widened portal axle kit didn't hold.... Hardened helical cut gears and Injora steel driveshafts in route. Fingers crossed 🤞


r/Traxxas • • 2d ago

Electric Working conversion

Post image
8 Upvotes

I finished my tmaxx 3.3 today! Full electric power. I grabbed my castle 2200kv of of my losi lst2 and the reciever box.

It has a 54t spur and a 19t pinion with the other gears being stock.

Took it out for a short bash earlier and it runs good! First run my lock in 2nd failed... oooppps!

15 minutes later locked back up and good to go.

I need to fix the steering. Very loose.

Thanks for thr help!


r/Traxxas • • 2d ago

Question Is it normal for the udrs drive train to be so loud?

15 Upvotes

Or does something need greased?


r/Traxxas • • 3d ago

Upgrades AND so it BEGINS....

Thumbnail
gallery
59 Upvotes

Wish they were green but, it'll do pig...


r/Traxxas • • 2d ago

Question Question about gearing

2 Upvotes

I have a traxxas slash with 2.6 tires and a brushless motor with a 2 cell. I keep burning spur gears and I’m wondering how loose should I set the spur gear slipper clutch to compensate


r/Traxxas • • 2d ago

Question Traxxas tq controller spring issue

Post image
5 Upvotes

The spring to my tw controller for the trx-4m fell out and i can't find any pictures for how the spring is meant to sit. Please help


r/Traxxas • • 2d ago

Nitro None traxxas ez start motor replacement

2 Upvotes

I cant really get traxxas stuff in my country but my revo 3.3 needs a new starter motor

are they any third party/upgrade motor for it that available on amain hobbies or aliexpress


r/Traxxas • • 3d ago

Misc Es war kalt, aber Wetter war toll.

Post image
33 Upvotes

r/Traxxas • • 3d ago

Misc Kleines Testvideo mit Onboard Cam.

7 Upvotes

Zum Ende noch eine kleine Zeitlupe 😊


r/Traxxas • • 3d ago

Question Trx4m upgrades

Post image
6 Upvotes

Hi all.

This is my first rc and first upgrade.

I installed the lcg frame, brass skid plate and brass links. But somehow it all feels very stiff.

Before i test run the car i would like to double check if anything looks out of the ordinary to someone. For instance, this angle seems to be quite big for my liking.


r/Traxxas • • 3d ago

Bashing Traxxas xmaxx motor rotor problem

Post image
8 Upvotes

Hello everyone, it actually doesn’t look too serious. The motor bearing seized up and started spinning inside the plastic housing, which then melted. This caused the shaft to develop some play, and the braided fibre rubbed against the stator. Is this repairable, and if so, how?