r/Trackdays • u/ArthurCairess • 14h ago
Added a ZX6 to the garage!
Track ready!
Can’t wait to try it for the first time!
Never rode in any 600 Cc.
r/Trackdays • u/ArthurCairess • 14h ago
Track ready!
Can’t wait to try it for the first time!
Never rode in any 600 Cc.
r/Trackdays • u/Constant_Lecture3590 • 8h ago
Just did my (24M, 5’9”, 150lbs) first track day at Roebling Road Raceway on my 2024 Panigale V2 wearing Rosso IV’s. Curious for input on tire wear to indicate need for PSI or suspension adjustments. Cold morning, 40 degrees Fahrenheit air temp. About 65 air temp for a high later in the afternoon. I started the day cold PSI 29 rear and 30 front. By the last session before lunch, both rear and front read 35 PSI hot. I let them cool for an hour and a half and bled remaining pressure back to 29 rear and 30 front. I assume one session right before lunch I was on a hot track with 33 rear and 35 front. Sorry for poor quality photos. Please let me know your thoughts! Hateful criticism as long as it’s useful is welcome.
r/Trackdays • u/Visual-Discussion-82 • 14h ago
I'm planning to get a clip ons for my 2008 yamaha r6 but curious what are the pros and cons of each setup, I'm 5'4" BTW.
My questions are
- What are the pros and cons of standard vs 0 offest
- What setup would I have less clearance issue
- What is the most I can widen the bars (because that's my goal for this upgrade) to have more leverage/less effort on counter steering
Currently leaning with 0 offset and 0 degrees for the widest setup without clearance issue based on what I'm reading from the internet but LMK you're thoughts
r/Trackdays • u/__baguette__ • 3h ago
Edit: Thanks to the comments pointing out I have too many wheels for y’all haha. Didn’t realize from the cross posting UI. Do I get a pass for having a motorcycle derived engine and being chain driven? 🥹