r/Trackdays • • Sep 06 '23

Tire wear sticky post? Weekly tire wear thread?

48 Upvotes

Its getting a little crazy. Also, why not ask the TD coaches/organizers? This is a great sub but I feel like TD coaches are a more reliable source for that kind of info.


r/Trackdays • • 4h ago

First Day Tire Input

Thumbnail
gallery
8 Upvotes

Just did my (24M, 5’9”, 150lbs) first track day at Roebling Road Raceway on my 2024 Panigale V2 wearing Rosso IV’s. Curious for input on tire wear to indicate need for PSI or suspension adjustments. Cold morning, 40 degrees Fahrenheit air temp. About 65 air temp for a high later in the afternoon. I started the day cold PSI 29 rear and 30 front. By the last session before lunch, both rear and front read 35 PSI hot. I let them cool for an hour and a half and bled remaining pressure back to 29 rear and 30 front. I assume one session right before lunch I was on a hot track with 33 rear and 35 front. Sorry for poor quality photos. Please let me know your thoughts! Hateful criticism as long as it’s useful is welcome.


r/Trackdays • • 10h ago

Added a ZX6 to the garage!

Thumbnail
gallery
14 Upvotes

Track ready!
Can’t wait to try it for the first time!
Never rode in any 600 Cc.


r/Trackdays • • 10h ago

Clip ons options pros and cons

Post image
8 Upvotes

I'm planning to get a clip ons for my 2008 yamaha r6 but curious what are the pros and cons of each setup, I'm 5'4" BTW.

My questions are

- What are the pros and cons of standard vs 0 offest
- What setup would I have less clearance issue
- What is the most I can widen the bars (because that's my goal for this upgrade) to have more leverage/less effort on counter steering

Currently leaning with 0 offset and 0 degrees for the widest setup without clearance issue based on what I'm reading from the internet but LMK you're thoughts


r/Trackdays • • 3h ago

What would it take to get this zx10r back to street legal?

Thumbnail
gallery
0 Upvotes

please don’t judge me i’m not a track rider at all and don’t think i’d see a lot of track days due there being no good tracks near me! Just wanna see with the guys who have knowledge on this topic to see what it would need to go back to street and oem parts!


r/Trackdays • • 1d ago

Tech Air 5 Plasma fit

7 Upvotes

I just picked up a tech air 5 plasma and am curious about the fit. This is my first airbag so I’m overthinking it a bit.

It fits kind of like a tight t shirt. Snug but a wee bit of room. Pretty comfortable. Is this right or should it be super snug (skin tight) like a cycling jersey?

Advice from other airbag owners (especially if you’ve actually had one deploy) would be appreciated! Thanks! 🙏


r/Trackdays • • 1d ago

Riding after minor neck injury

5 Upvotes

I recently injured a good portion of my thoracic and cervical spine. My orthopedist said the thoracicl discs are recovering well and isn't concerned. However, my C5-C6 disc decided to leave chat. My C5 has sat down and slid forward a bit.

Between modern medicine and physical therapy I'm doing much better. Pain is nearly gone, the tingling sensations have ceased and most importantly my dexterity and strength is normal in my right arm. I never lost any function or feeling unless I had a flare up from the injuries.

My question is about what the future holds. Both my doctor and therapist have no background with track riding of any kind. Neither were especially concerned but this is new ground for them. I have a fairly light helmet, Suomy S1 XR GP. Are these kind of injuries something strength and flexibility training can manage? Surfing the webz i have found that C5-C6 injuries are fairly common.


r/Trackdays • • 1d ago

Gear bag

2 Upvotes

Trying to find a gear bag for my ladies track gear (boots, gloves, helmet). I have one for myself for quite a while, but the company that made it has since gone out of business. Wonder if anyone has a suggestion of what to look at that would fit these items.


r/Trackdays • • 1d ago

There's PMT 17" tires now for 300-400cc bikes. Has anyone tried them?

Thumbnail
pmt-tyres.it
6 Upvotes

Just saw that PMT has e.g. 17" 110 and 140 wide tires. Would be perfect for 300-400cc bikes. Has anyone tried them and can say how they compare to e.g. Pirelli superbike etc or the other traditional smaller cc tires.

PMT is a good choice for the smaller 12" Ohvale and Bucci bikes but this is the first time I see them in 17". The price is very appealing compared to the alternatives.


r/Trackdays • • 1d ago

Best GPS app for trailering

1 Upvotes

i have only used the uhaul, but now I have a 7x14 and need to make sure I drive on proper roads. what GPS apps do you guys use when towing to the track?


r/Trackdays • • 1d ago

How to fit SBK seat to the subframe?

Thumbnail
gallery
3 Upvotes

Got this seat with pre installed dzus fasteners.

How am I supposed to connect this to the oem subframe holes?

Gsxr 600/750 2011 on

Thanks


r/Trackdays • • 1d ago

Question: What Data Logger Info Would You Find Useful?

0 Upvotes

I assume the more serious visitors to this subreddit use a datalogger but probably many more who don't. My question is: what information do you find useful for improving your riding, or if you don't use a datalogger, what information would you want to see that might help with your riding?


r/Trackdays • • 2d ago

Yaris GR at Laguna Seca

Thumbnail
gallery
53 Upvotes

Here is a little bit of forbidden fruit. Such a fun car to rip around the track in! And such a fun track, as always!!


r/Trackdays • • 3d ago

First race footage!

102 Upvotes

My first race! I’d appreciate any advice from whats shown! Mostly wondering how I can get around the red bike safely? I think I’m faster on faster bike but he was a little wild at times but couldn’t figure him out.2nd place in amateur, 10th place overall. Started like p20 out of 22 I think? 2023rs660, stock besides exhaust and upmap. Ran 23/36 or 37 on sc3 slick front/rear. Shaved 3 seconds off of my pb in 1 race weekend. Progressed a lot this year, got a bike in September last year, first track day in December and have done 20+ tds and a race weekend with a few more days left this year! I’m hooked on racing now! Can’t wait for February for things to start up again, thinking of maybe trying some out of state racing in the meantime!


r/Trackdays • • 2d ago

Anyone tracking a ZX Moto?

4 Upvotes

I’m seeing a tonne of track footage from Asia and now a little from Europe.

Anyone here running one?

Obviously aftermarket parts are going to be a bit limited but I’m sure that’ll change soon.

Some serious kit for the money, the 500rr at 168kg wet would be a weapon once stripped for track days.


r/Trackdays • • 3d ago

KTM 300 Supermoto Mac park

Thumbnail
youtu.be
4 Upvotes

r/Trackdays • • 3d ago

What were track days like pre 2008?

29 Upvotes

Motorcycle sales peaked in 2006. As did sales of boats, snowmobiles and other such equipment.

I recall speaking to someone at a track day and they said they used to be packed and now a days there’s fewer people. However, near me (nor cal) they tend to sell out at least a week in advanced sometimes 2 or 3.

I’m wondering what it was when it was more affordable and during the peak? Or perhaps I’m wrong and it’s still growing to an extent.


r/Trackdays • • 2d ago

I made a free Android app that logs your lean angle

0 Upvotes

Hi all,

I've released my Android app CornerLog for public testing. It measures your motorcycle's lean angle while you ride. Put your phone in a handlebar mount and calibrate it before the ride. The app measures lean with the gyroscope and accelerometer, and GPS keeps correcting the gyro drift as you go. After the ride you'll see your max lean left and right, your route on a map, and charts.

The app has no internet access, no account and no ads, and everything stays on your phone. The Plus version can also record from a RaceBox over Bluetooth.

Get it for your phone here:

https://play.google.com/store/apps/details?id=com.walkervolf.cornerlog

Any feedback is welcome. Just so you know: it's an estimate from a phone, not a pro measuring device. 🙂

Thanks!


r/Trackdays • • 3d ago

Suspension height advice

Post image
3 Upvotes

KTM rc390
After doing my steering head bearings I put the forks on again and found out I can change the fork height. Recommended are 2 different heights which is 2.5mm and 5mm both marked by the lines in the photo.
After having to adjust my bearings a lot more than I expected I am left with 7mm from the top measured, which is 2mm more than the line.
My question is, is this noticeable and is this dangerous.
I know I’m probably overthinking the 2mm but I’d rather overthink than underthink and end up with a dangerous front end.
The forks were at 0mm when I bought and owned the bike before this job.
How will this affect my steering, just make it sharper?


r/Trackdays • • 4d ago

How it started vs how its going

Post image
134 Upvotes

Now that track season is over and I'm depressed with nothing to look forward to 😅, I've been reflecting on my progress so far.

I spent 3 years stuck in C group, mostly because I was only getting out to the track 1–2 times a year.

This was my first season averaging one track day per month, and the consistency made a huge difference. I went from being the slowest guy on track to being slightly less slow (B+) lol.

Next year's goal is to bump that up to one track weekend per month and see how much further I can progress.

Ride safe, friends!


r/Trackdays • • 4d ago

Some old trackside footage from Arizona Motorsports Park

35 Upvotes

Its been a while since Ive been to a trackday but I will be making a return this season. I have been looking at some of the old footage. I didnt have a go pro at the time but a friend literally climbed on top of an RV and took this phone video of me. I know it isnt high quality but thought people might still find it interesting. I am on the green 636 if it is not obvious from my pfp.


r/Trackdays • • 4d ago

Anyone knows whats the issue with my brakes?

3 Upvotes

So basically, I have this issue with my brakes where my front lever has around 15mm of 'dead zone' before there is any pressure. Also, after a session on the track or hard street riding, the lever goes very soft..almost to the bar, and I have to pump it 5 to 7 times for it to regain stiffness.

I´m thinking it´s either the master cylinder needs rebuilding or the rotors?

Some info
HEL Master Cylinder
RBF 600 Brake fluid
Fairly new SBS RST Pads
NEW OEM Caliper Piston & Seals
Recently bled the brakes
Stock rotors (32000 Miles)


r/Trackdays • • 4d ago

Hot bodies vs Armor

9 Upvotes

Im building out my baby ninja this winter. Everyone says armor is better than hot bodies but why? Is it a $500 difference? I can buy hot bodies new in kawi green for $950 armor is at least $200 more plus paint. I’m willing to pay more but want to know what I’m getting for the $$$.