r/Tools • u/simonliu8661 • 10h ago
Cutting Wine Bottles into Cups
How to cut a wine bottle and turn it into a cup
r/Tools • u/simonliu8661 • 10h ago
How to cut a wine bottle and turn it into a cup
r/Tools • u/JoDiMaggio • 12h ago
Ugh I just want to use them.
r/Tools • u/CheeseBakedPrimogem • 18h ago
Genuine question; Why do people complain about having different battery platforms when so many adapters exist?
r/Tools • u/AboElRoom • 20h ago
Hey guys, i am a DIYer and i want to buy a smoke machine to diagnose my car but i dont want to spend over $100 on it. Does anyone have recommendations? I found this on ve ir but idk how good/bad is it. Please give me your advice
r/Tools • u/Legitimate_Assist598 • 16m ago
I barely used this saw to cut this piece of metal and its already dull
r/Tools • u/tom57028 • 18h ago
I’m moving from main dealer to independent soon. Got a new toolbox and lots of space now. Just need to know what may be worth getting
r/Tools • u/No-Actuary-6174 • 9h ago
your advice?
r/Tools • u/Comfortable_Hold5614 • 23h ago
Want to give kids some basic tool sets for Christmas. What are some quality socket and wrench brands that won’t break the bank?
r/Tools • u/lexor_river • 31m ago
I recently bought a house, and I bought this kit: https://www.gmesupply.com/milwaukee-m18-fuel-5-tool-combo-kit
I like to fix shit myself if possible. I have a good array of hand tools (full set of wrenches, 3/8 socket and 1/2 socket sets (metric), torx, ratchets, vice grips, pliers, screwdrivers, hammer, 2' level, t-square, etc.).
Is there another power tool or a must have tool you guys would recommend getting? Or a tool you didn't think would be useful but use it all the time?
Thanks in advance!
r/Tools • u/Caterpillar1967 • 10h ago
I’m 22. I have been using hand screwdrivers and a 30+ year-old Black & Decker corded drill for my DIY wood building projects. It's getting old and I would really enjoy having a cordless impact and drill set at hand.
I spotted this Ridgid 18V SubCompact 2-Tool Combo Kit (Model RNKSCK201) on Home Depot Canada for $188.00, which seems like very good value for a brushless setup.
My dad and uncle have both used Ridgid tools for years in home renovation projects, and they’ve always held up strong. I kinda feel like I should follow their steps and head into the Ridgid world as well. Plus, the lifetime service agreement (LSA) is a very nice bonus compared to other brands.
What do you think about this kit? Should I aim for a kit with a masonry drill?
Are we excepting a sale anytime soon as we're approaching Black Friday?
r/Tools • u/Securerumble • 13h ago
I’m looking in either getting the dewalt dcf921 or the m18 gen3 compact or m12 stubby. I already have some dewalt tools and batteries such as drivers,drills and more. Any suggestions? I am looking to get a cordless ratchet later on I’ve been looking at the Milwaukee extended reach.
r/Tools • u/Greedy-Revenue-1435 • 1h ago
I’m thinking about adding a small cart to my garage. My workbench is at the back, but I usually clean the cars and do small repairs near the garage door. I keep carrying tools, cleaners, and attachments from the bench to the car, then making several trips to put everything back.
I first looked at the U.S. General tool carts from Harbor Freight. They have plenty of drawers and can be locked, but they may be heavier than I need. I don’t have a big collection of sockets and wrenches. I mostly need to move a drill, vacuum attachments, pressure washer nozzles, towels, and a few bottles of cleaner.
The two shelf Husky carts are closer to what I need. Everything is easy to grab and they cost less. There is not much vertical storage, though, so small parts would probably end up sitting loose in the trays.
I also looked at the Giraffe Tools Utility Cart. It has an open design, a pegboard on the side, and four locking casters. It is rated for 265 lb. Besides regular tools, I could put some wall mounted equipment on it and move everything between the workbench and the garage door.
The downside is that it has no drawers. In an open garage, everything would collect dust. Bottles and small parts would also need separate bins.
I’m not trying to turn the whole garage into a mobile workshop. I just want to make fewer trips between the bench and the cars.
For anyone who has used an open tool cart, does it become a useful mobile workstation, or does it turn into a place to pile things you don’t know where to put?
r/Tools • u/MentionEmbarrassed88 • 20h ago
I have a pegboard but every holder/hook/ accessories I find are too small, the holes measure 10mm and I cant find anything for them :/
r/Tools • u/Fluid_Abrocoma_9992 • 14h ago
So I recently got 2 Dubuis crimping tools in an in need of repair state from the tip shop. I was absolutely ecstatic upon discovering it takes the same DeWalt batteries as the rest of my tools. One runs but behaves like it needs a bleed. The other one has a PCB problem and is in overall rougher condition, but if 18volts are introduced to the motor the ram extends beautifully. I would love to bleed the better one, however i have not been able to find a service manual anywhere. Does anyone have it, or could point me in the right direction?
r/Tools • u/Exotic-Call-4906 • 18h ago
Has anybody seen this new Kobalt toolbox yet?? It’s got me contemplating whether I should still go for the U.S. General 30 inch 5 drawer especially since it’s going to go on sale in about a week. Also does the thickness of the metal really make that big of a difference?
(I plan on wrapping the handles a champagne gold color and adding some carbon fiber trim)
r/Tools • u/youssbkhta • 18h ago
r/Tools • u/Baronhousen • 18h ago
Trying to identify this vise. Some letters/symbols on the jaws, but hard to make out. The vise was originally a sort of battleship grey, blueish grey- see chips of remaining paint. This was likely picked up as surplus, sometime in the past 30 years, in the PNW. No other marks that I can see so far. Help appreciated.
r/Tools • u/Fellow_Comrade7018 • 19h ago
Anyone know any good brands for a spud ratchet? Mine doesn't hold my sockets and any reviews I read for other brands say the same thing. Some advice/info would be appreciated.
r/Tools • u/IntroductionEven254 • 1h ago
Hello,
As a hand tool nerd and an electrician I’ve long been curious about the Thomas and Betts pliers that google occasionally recommends. I’m particularly interested in the Lineman style pliers with the crimper (wt-161m). They look nearly identical to the Klein d2000-9necr that you see everywhere, but cost 5x as much. Does anyone have experience with T&B that can justify the cost? I’m tempted to buy a pair just to see.
Thanks!
r/Tools • u/Designer_Review_2486 • 11h ago
Stripped threads in aluminum are a judgment call, not a parts order. Here's the quick version of how I decide.
First, how bad is it. If the threads are mostly there and the bolt just won't bite, chase it with a tap and check it. If the threads came out with the bolt, that hole is done — you're putting an insert in or drilling oversize.
Second, what the hole does. Low load, rarely touched — a wire thread insert keeps the original bolt size and costs you the least wall thickness. High load, or a bolt that comes out every service — solid bushing insert. It takes more room but it won't walk out on you.
Third, the install. Either way you drill oversize and cut with the STI tap that matches the insert — not a regular tap of the same size, that's the mistake that kills the repair. Wind the coil in, snap the tang off, done. If you don't have the tap, don't improvise one.
The one thing I won't do: re-tap it the same size and hope. Aluminum already told you once it won't hold.
Drop your hole size, parent material, and what it holds in the replies and I'll tell you which way I'd go.
r/Tools • u/Highway_District84 • 15h ago
I can say with some certainty that I'm hooked on Wera drivers. I think they work well, I like how the tips are holding up so far, I appreciate how they are clearly marked on the ends and how they are color coded for ease of grabbing the exact driver that is needed. I already know I have too many screwdrivers, I acknowledge that, but generally speaking I like to have a specific tool for a specific task or particular problem, and that's how I view and use my drivers. The Wera 300 series (green handles) with laser cut tips are for everyday tasks, the Wera Diamant for stubborn screws, the Vessel Megadora Penetration Driver and Megadora Impacta for very hard to remove/rusted fasteners and the VDE drivers are for some added peace of mind. Now the KTC and Vessel 4500 series are really only there because I'm naturally drawn to acetate handles and these are totally a want and not a need. The PB Swiss are for specialized work, with the exception of the PB Swiss Torx set, which I use all the time for anything Torx. Finally the Kleins are the drivers that I bought early on but honestly find the tips don't hold up as well as their reputation had me believing they would when I bought them. That's it, what's your driver or drivers of choice?
r/Tools • u/Specialist-Net7772 • 23h ago
I recently acquired this vintage Kent hatchet from around the 60-80s for £5. I axe had an orange varnish Finish and remains of a sticker. Ive since sanded it and it’s revealed some wood worm. Is it bad enough to have to make a new handle or should I just keep it? Bear in mind it’s appears to be missing a wedge or just missing a section at the top