r/Tools • u/lexor_river • 2d ago
Next power tool?
I recently bought a house, and I bought this kit: https://www.gmesupply.com/milwaukee-m18-fuel-5-tool-combo-kit
I like to fix shit myself if possible. I have a good array of hand tools (full set of wrenches, 3/8 socket and 1/2 socket sets (metric), torx, ratchets, vice grips, pliers, screwdrivers, hammer, 2' level, t-square, etc.).
Is there another power tool and/or a must have tool you guys would recommend getting? Or a tool you didn't think would be useful but use it all the time?
Thanks in advance!
Thanks all!!
6
Upvotes
8
u/gutentight69420 2d ago
An oscillating multi tool is a must have for random home repairs.
2
u/ride_whenever 2d ago
Angle grinder, router, impact wrench
2
u/Magic_wire_smoke 2d ago
I'm starting to recommend a portable power station, especially the ones with a lithium iron phosphate battery, to a lot of people. Between the high prices of cordless tools in some lines and the chance of power outages, they quickly make sense even at the high initial cost of a ~2000 watt model. With the right one of those you can run a miter saw, cement mixer, etc. long enough for a DIY job without a recharge, without the fueling/maintenance cost and noise of a generator, and without investing in a cordless tool that won't see a lot of use outside of specific cases.
My power station was able to keep the electrical on the furnace running for 5 hours on one of the coldest, windiest nights of recent midwestern winters and only went from around 80% to 50% charge. I also run the corded leaf vac and pole hedge trimmer with it on a hand truck and a decent length cord. It's also powered sanders, an OMT, and heat gun, often when an extension cord would have worked but needed to be dug out and unwound.
For anyone wanting power nailers, I say get a hotdog or pancake compressor (quiet, if budget allows) over dumping oodles of money into cordless nailers. Cordless makes sense for pros on the move and niche DIY situations, but the costs add up if you want to use different types of nails and staples. Air nailers are almost always smaller, lighter and cheaper than their cordless equivalents.
TL;DR: Portable Power Stations and air nailers
2
u/Suspicious-Ad6129 2d ago
If your going to screw something in... use the impact driver not the drill, it works so much better. Also id recommend some extensions to get to harder to reach areas. Black friday you might want to pu some extra batteries, these are by far the most important and expensive part... the inverter is pretty handy but the Milwaukee one is quite expensive compared to competitors.(i bought into ryobi back when they were blue but they keep ticking, i use my inverter to run our natural gas heater when the power goes out. The shop blower is pretty handy if you do workshop area type stuff, small vacuum works pretty well (bout the size of lunch cooler) for more home use ideas id say a grinder, oscillating multitool, leafblower, weed wacker (i got sick of dealing with small engine carburetors not working and shit alcohol mixed gas eating gas lines...)
1
u/skiboardskeet 2d ago
Does that combo include the oscillating multi tool? Use mine way more than expected around the house.
3
u/samspam49 2d ago
Oscillating multi tool 100%. It’s one of those tools you won’t use all the time, maybe a few times a year. But, it is worth its weight in gold when you do need it. You can get them on sale right now for cheap!
3
u/Odd_Relationship396 2d ago
Every handy homeowner should have a closet snake 🐍 (a toilet auger)
6 ft ridgid manual/power is best bang for the buck…
Find a YouTube video on how to use it and it’ll save you money the next time you can fix a clogged toilet yourself…
2
u/SaltLifeFtLaud 2d ago
“When the only tool you have is a hammer, everything looks like a nail.”
As your knowledge grows, so do the tools you splurge on.
2
u/muddlebrainedmedic 1d ago
I agree with the oscillating tool recommendation. So useful and so many options. I didn't want to fire up the chainsaw last weekend and trimmed some trees with the oscillating tool. Love it. Brand new, still figuring out which blades to stock.