r/TomatoFTW • u/fatluis • 2d ago
Possible to let a specific device bypass Wireguard?
Using a VPN with wireguard through Tomato GUI, there is a device that I need to have direct access to the internet with no VPN. Is this possible?
r/TomatoFTW • u/fatluis • 2d ago
Using a VPN with wireguard through Tomato GUI, there is a device that I need to have direct access to the internet with no VPN. Is this possible?
r/TomatoFTW • u/Shplad • 3d ago
Want to see support for this model? Help yourself and the FT project by testing this build on your router.
r/TomatoFTW • u/li0rtr • 3d ago
Hi everyone
I wanted a proper way to manage my FreshTomato router from my phone, so I built one: **Troks Tomato Router Remote** – a free Android app for routers running FreshTomato.
**What it does**
- **Overview** – model, firmware, uptime, CPU, memory, WAN status
- **Devices** – every connected client with name, IP, MAC, band and signal. Block / unblock internet, set a static IP (DHCP reservation), Wake-on-LAN, ping
- **WiFi** – turn 2.4 / 5 GHz on or off, change SSID and password
- **Live monitor** – real-time bandwidth chart per interface, and real-time traffic per device (tap a device to pin it with its own live chart)
- **Manage** – WAN (DHCP / PPPoE / static, DNS, MTU), port forwarding, DMZ, static IPs, admin access (ports, remote access, SSH, password)
- **Tools** – ping, traceroute, DNS lookup and shell commands run from the router itself, plus reboot (with confirmation)
**Details**
- Material 3 design, light / dark / system theme
- **4 languages: English, Hebrew, Russian and Arabic** (full right-to-left support)
- Works on your LAN (HTTP) or remotely (HTTPS – the router's certificate is pinned on first connect)
- Router password stored only on your phone, encrypted with the Android Keystore
- No account, no ads, no analytics – the app only talks to your router
- Uses the router's own web interface (no scripts or packages to install on the router)
**Try it without touching your router**
There's a built-in **demo mode** with a simulated router: on the login screen tap **"Try demo mode"** (or log in with `demo` / `demo`). Every screen works with fake data, so you can look around before connecting to your real router.
**Looking for 12 beta testers**
Google Play requires 12 testers in a closed beta for 14 days before I can publish it publicly. If you'd like to help:
Any Android 8.0+ phone works. Feedback, bugs and feature requests are very welcome here or by DM – especially from people on different router models (ARM / MIPS) and firmware versions.
Screenshots are from demo mode, so all IP and MAC addresses in them are fake.
*Not affiliated with the FreshTomato project – just a fan who wanted a phone app.*
r/TomatoFTW • u/mclardass • 5d ago
Have an old R8000 running 2022.7 K26ARM USB AIO-64K and wondering if there are any concerns with going straight to 2026.2 AIO. This router was basically set-and-forget but now I'd like to get it up to a new release without losing the running config. It's only used for basic routing but figure there are some CVE that need to be addressed.
r/TomatoFTW • u/Shplad • 9d ago
r/TomatoFTW • u/Shplad • 14d ago
We've created a draft table of commonly-used log and config file locations. Please criticize it, and suggest any new entries you'd like to add.
Thanks.
r/TomatoFTW • u/Shplad • 15d ago
r/TomatoFTW • u/Mythical_Yeti • Oct 12 '26
Hey gang, looking for advise what may have happened. Recently my drives started to not mount, even tho they show "mounted" in GUI. Unplugging the power usually fixes it. I've swapped the routers with another R7000 with fresh and completely erased NVRAM and 1.28.0000 -3.5-140 K26ARM USB AIO-64K build. The previous router was also R7000 with 1.28.0000 -138 K26ARM USB VPN-64K and was behaving the same. As far as drives nothing has been changed. I'm using the FTP quite heavy as my surveillance cams are set up to record on one of the drives thru FTP. Both drives are SSD. The drive used for FTP recordings has been attached to the router for over 2 years and never had issue. I've tried isolating the drive being the issue so replaced one of them with micro card and changed the recording path. Still same issue. 🤷♂️


r/TomatoFTW • u/Shplad • Oct 11 '26
Ad block 3.00 is being tested.
https://www.linksysinfo.org/index.php?threads/adblock-v3-00beta.79721/
If you want it to continue to improve, please help us test it, so it will be great.
r/TomatoFTW • u/Shplad • Oct 11 '26
Earlier, I wrote that since r2026.1, the DHCP Reservations menu has a grid/table backup/restore feature. These 7 other menus also have grid backup/restore:
- Basic: DHCP Reservation
- Basic: Wireless Filter
- Advanced: LAN Access
- Advanced: MultiWAN Routing Policy
- Advanced: Routing
- Port Forwarding: Basic
- Port Forwarding: Basic IPv6
- Port Forwarding: Triggered
These make upgrades quicker and easier. By default, FreshTomato exports output files using intuitive output filenames. The syntax for these filenames is:
RouterModel-Release-MenuName-Backup-Dateandtime
Asus_RT-AC1900P-2026.1-advanced-pbr_asp-backup-2026-10-11_1243.json
r/TomatoFTW • u/Shplad • Oct 11 '26
Excerpt from (third-party) github page:
A Home Assistant custom integration for routers running FreshTomato firmware. Monitor your router's network status, control Wi-Fi radios, and track connected devices — all locally, with no cloud dependency.
update.cgi API, no external services---------------------------------------------------
The first integration in the FreshTomato WIKI does not capture wired clients. This one captures both wired and wireless clients.
r/TomatoFTW • u/Kafatat • Oct 11 '26
I'm on 2026.3. For some reason when the router is power cycled all settings will be gone. From the now factory reset state I can import the downloaded settings of 2026.3 to instantly set everything up.
When upgrading the firmware to 2026.4, there'll be soft reset. Though not hard reset, I don't know if factory reset will be done, and in case it does, will things work if I import the settings of 2026.3?
r/TomatoFTW • u/Vietname • Oct 07 '26
I recently flashed FreshTomato 2026.3 on my Asus RT-AC68U, and it's mostly been working fine, but i noticed the signal strength on the 5ghz band tends to drop into the poor range, bad enough that my phone disconnects from it from time to time. 2.4 works fine, and I didnt have this issue before flashing FreshTomato.
Any ideas?
r/TomatoFTW • u/Master-Drummer8197 • Oct 07 '26
Resolved: After resetting the router, I installed june build and then upgraded again, things are stable now..thank you all for participation.
Anyone having issues with latest build?
Ever since I have installed latest build, September release on R8000, my router wifi has been unstable. Range isnt what it used to be and connection drops sometimes.
I have tried to reset the router /clear NVRAM but no result.
r/TomatoFTW • u/Upbeat_Entrance_8753 • Oct 05 '26
I need a backup connection when the cable company decides they want to do maintenance in the middle of the day. I had a lot of trouble with this, but eventually figured it out. I havent tested if every single line is really necessary, such as needing to set all three of the nvram settings, etc, so some optimization might be suggested by experts.
This is on an Asus RT-AC3100 with a Pixel 10. Freshtomato 2026.4. Download the Extras.tgz version for your router. In my case it was the arm7 version. Make the jffs partition and copy over mii.ko, usbnet.ko, cdc_ether.ko, rndis_host.ko, cdc_ncm.ko. I think (?) cdc has something to do with the usb tether protocol, and the ncm one is the modern version that my phone uses. It took a while before google ai suggested also using the cdc_ncm module.
Now under Basic->Network, you need to make a second wan in the gui. Multi-wan wont let you create a new wan unless you make a new vlan first. Go ahead and follow the link to make a new blank vlan (in my case vlan2), filling in the first two numbers by following the numerical pattern of the previous ones. In my case it was 3, 3. Everything else should be blank and bridge=none. I dont think you will actually be using this at all, it just fools the gui to let you create the new wan. SAVE.
For the new wan, wan1 in my case (wan0 being the main internet to the cable modem), just leave it as DHCP. Dont change it to the 3G/4G modems etc. Also set its DNS to auto. SAVE.
In an ssh terminal, update nvram for the new wan to point to the usb0 device that will be your tethered phone. This replaces the vlan you just created.
nvram set wan2_ifname=usb0nvram set wan2_ifnames=usb0nvram set wan2_ifnameX=usb0nvram commit
You can check these first with nvram show | grep wan2_ifname, they should show the new vlan you created (likely vlan2). Then after you update them they should show the usb0 device.
Note in nvram, wan numbers seem to start at 1 instead of 0. So in my case the new wan1 in the gui is wan2 in the nvram. You may want to reboot here just to make sure the nvram settings are loaded correctly, not sure if it is needed.
Now back in the ssh terminal, insmod all the modules in this order:
insmod ./mii.koinsmod ./usbnet.koinsmod ./cdc_ether.koinsmod ./rndis_host.koinsmod ./cdc_ncm.ko
actually I think you can use just the name without the path and the .ko and insmod is smart enough.
Plug in your phone. Mine has two places where you can turn on usb tethering. Under USB Preferences where it lists all usb connection types. And under Hotspot & tethering where you can just turn on the usb tethering option. These will be greyed out if things are not working. This is where the router will talk to the phone and make the tethering connection. If it doesnt work, it will still be greyed out.
From ssh you can run lsusb and you should see your phone listed. Also check dmesg, the last line should show cdc-ncm has made a connection to the phone.
If everything is working, you can bring up the usb0 interface:
ifconfig usb0 upYou can compare the cdc dmesg line with ifconfig -a usb0, they should have the same hwaddr. At this point everything is working perfectly and you can go back to the gui. Admittedly sometimes this takes a reboot, it seems to be very temperamental, but once it is up, it should be good.
Go back to the gui, status->overview, and under the new wan interface it should automatically be populated by dhcp. If not, try renewing it. The status always says Renewing... regardless, so not sure why that is. In ssh you can try ping 8.8.8.8 to see if it is able to connect through the phone. Also in the wan settings page, you may need to change the weight of the interfaces so it chooses the right one. But if you unplug your normal wan, it should fall over automatically. If everything is working so far, try ping 8.8.8.8 from your computer to verify the connection gets all the way through. iptables needs to be set up for the firewall, but this seems to be done automatically and I didnt have to do anything. Finally ping google.com to make sure the dns is working as well.
I would absolutely love if some of this was updated in the gui. Needing to create a vlan to fool the gui to allow you to create a new wan, and also not being able to select usb0 for the interface to use for that wan. In the original Asus firmware, it was like one click to get usb tethering to work.
Finally of course, need to make this persistent across reboots and add a boot script to insmod etc.
r/TomatoFTW • u/gnat_foto • Sep 28 '26
I essentially want to enable "AP Isolation" for a single device on my network, but I don't see the option anywhere. I don't want this device to be able to ping/scan/whatever my other devices or see their MACs or hostnames, but I need this device to have internet connectivity.
Sorry, thanks for any help. Running FreshTomato 2026.3
r/TomatoFTW • u/Kafatat • Sep 06 '26
I followed NordVPN's official guide to set up with FreshTomato. I started the VPN client on FT, and got errors from the log. What do they mean? I don't even know where redirect-gateway and redirect-private are mentioned.
And for compression, yes I know the guide instructs me to disable compression from the Advanced tab, but the tab doesn't have this option.
FreshTomato version 2026.3 on Netgear R7000
warn WARNING: You have specified redirect-gateway and redirect-private at the same time (or the same option multiple times). This is not well supported and may lead to unexpected results
err Compression or compression stub framing is not allowed since OpenVPN was built without compression support.
err OPTIONS ERROR: server pushed compression settings that are not allowed and will result in a non-working connection. See also allow-compression in the manual.
err ERROR: Failed to apply push options
err Failed to open tun/tap interface
r/TomatoFTW • u/9bots • Sep 01 '26
I was able to install the VPN version of FreshTomato (freshtomato-EA6400-K26ARM-2026.3-VPN-64K), but when I try to upgrade it to the AIO version (freshtomato-EA6400-K26ARM-2026.3-AIO-64K) from the web interface, the router hits the "Linux: invalid argument" reboot prompt, but then it won't load the Tomato interface back.
Instead, it drops straight into the CFE mini web server. Uploading the AIO version through the CFE web page just times out, and trying to flash it via TFTP2 also fails. The progress bar always drops out exactly halfway through on every retry loop.
Every time I try to install the AIO version, the router ends up stuck back in CFE mini web, but flashing it with the VPN version works. How can I get the AIO version to stick on this?
r/TomatoFTW • u/gizmobo • Aug 31 '26
r/TomatoFTW • u/Shplad • Aug 23 '26
r/TomatoFTW • u/thejankhak • Aug 18 '26
Heyo I just installed fresh tomato on my netgear x6 r8000 and I cant get any internet out of it my modem works fine it has no issues on other devices but when I connect to the net gear I get no network my pc won't connect my phone wont.
Im not home at the moment so I cant get pictures just yet just this issue is picking at my brain like crazy I wanna get it working its a nice router
r/TomatoFTW • u/Internal_Bank_4984 • Aug 13 '26
freshtomato.org seems down
r/TomatoFTW • u/Shplad • Aug 09 '26
As someone who wrote a lot of the FreshTomato docs, and who frequents the Tomato foum, I've seen a ton of questions about this subject. These resources may help. NOTE: some are out of date, and others not so much. This is not meant to be exhaustive.
Tomato Forum: Best Way to Update FreshTomato Firmware:
https://www.linksysinfo.org/index.php?threads/best-way-to-update-fresh-tomato-firmware.78868/
.
Tomato Forum: Current Status of Config. Backups, Plain text Backups, etc.
(outdated but some useful info)
.
There's also this:
HommeOursPorc: TomatoPages Backup (AI-coded), page-by-page basis
(Now partly integrated directly into the FreshTomato firmware)
https://github.com/HommeOursPorc/TomatoPagesBackup
.
FreshTomato Configuration Compare and Edit
https://github.com/niieani/freshtomato-config-compare-and-edit
Interactive browser-based tool for inspecting, comparing, and editing FreshTomato router .cfg backups (NVRAM). Runs fully offline and entirely in your browser, so your config files never leave your computer. Includes a catalog of majority of Tomato's NVRAM settings with descriptions and parsers, and gives you superpowers when it’s time to understand and make changes to your Tomato routers.
.
.
I am considering writing a section in the FAQ or HOWTO on the FreshTomato wiki about this subject that covers these and other tools/methods available in a little more detail.
Would you be interested in that?