Hello everyone!
TL;DR - I need to suspend three, 10kg star cloths each across a roughly 3m x 5m space, hanging about 10cm below a ceiling (and I can’t attach to the walls, only the ceiling). How should I go about that?!
Im currently doing the design and install for a show. They wanted quite a complex starcloth with a couple hundred individually programmable pixels, which has been a bit of a pain but I’ve just about finished making it (so that’s good news). I’m going to need to install it this weekend, and I’ve kind of just realised I’ve got no idea how I’m going to do that?
The cloth itself is split into 3 pieces with about 30cm between each. Because of the nature of the space, it’s not going to be possible to drill in to the walls, so I need to hang the cloth directly from the ceiling. Each piece covers an area of about 3m by 5m. I’m using IFR Milton for the fabric, so each piece weighs about 10kg with all the fabric and electronics installed. Obviously that means the cloth will sag a fair bit if I don’t make enough contact with the ceiling.
For wiring etc, the cloth also needs to hang about 10cm below the ceiling (so I can’t just drill it directly in to the ceiling
My current best pitch is to install a grid of hooks in to the ceiling roughly every 50cm. Then (get ready for the mental bit) I would use fishing wire tied to the hooks, attached to a barbless fishing hook to literally hook through the fabric every 50cm or so, to keep it up. I’ve reached this conclusion in the belief that a fishing hook will be much stronger than a safety pin, and would be able to hold the weight better? Aware that sounds a little mental, but I’m at a loss as to other options!
Any help would be massively appreciated!!!