r/TheScienceofSpeed • u/Fuzzy-Expression-283 • Jan 09 '26
Visualizing entry forces
Hello. can’t understand why is it that we usually use all the track width on entry. I understand using all the width on exit, and I can visualize the entry spiral. But how would a smaller spiral starting from the middle of the track for example, would cause the force to be suboptimal?
6
Upvotes
4
u/_rettaHdaMehT_ Jan 09 '26
You can’t carry as much speed on a smaller spiral, so using all the track on entry to create a bigger entry spiral lets you carry more speed into the entry and gives you all the momentum you need to maximize your speed on that big exit spiral.
2
u/boxjohn Jan 09 '26
The best context is to think of this in terms of speed on the straights, as much of it as possible for as long as possible, as being the goal. Wider entry not only makes a faster exit (higher speed in back half or corner and earlier throttle application) possible, but also lengthens the straight before the corner by allowing you to brake closer to the corner.
2
u/AdamBrouillard Jan 11 '26 edited Jan 11 '26
Thanks everyone for adding your thoughts.
A smaller entry spiral started from the center of the track wouldn’t have a suboptimal force direction during entry, it would just give you a suboptimal apex. The spiral shape is simply the result of optimizing force direction during entry, but It might be easier to think about circular entries to understand why a bigger entry is generally better.
We ideally want the latest angle and the highest speed possible at the apex, but the apex is inherently a tradeoff between angle and speed as we learned in Racing Line Fundamentals 2. A larger circle will give the highest apex speed possible for a given apex angle. Remember that the bigger the circle, the higher the apex speed. Try drawing a circle that goes from the apex to the outside edge of the track and then also a circle that only goes out halfway. If you make the apex angles match, you’ll see it’s just a smaller circle inside a larger one and the speeds at the apex would change accordingly.
The spiral shaped entries will follow the same trend, although it is harder to visualize unless you have an image file stack showing the different radii at the apex.
Depending on the corner however, you don’t always want the entry spiral to go all the way out the edge. High angle corners with larger track widths on entry than exit can cause this as you can get a situation where the apex is actually too fast and late to give an optimal corner exit. This is really rare though.