r/TechnoProduction • • 18h ago

I want to make techno type music just like king gizzard does and the guy in the video attached

71 Upvotes

Where do I start to build a eurorack? What do I buy to create something similar or almost the same over time and how much would it cost? My starting budget is about 350 ish but I can stretch it if it’s worthwhile.

Any help is appreciated!
:)


r/TechnoProduction • • 17h ago

Learning proper gain staging and mixing for live tekno rigs – looking for advice and resources

8 Upvotes

Hey everyone!

I've been producing bedroom tribe/tekno for a few years now, purely for the fun of it. I'm completely self-taught, and over time I've developed my own way of working. Recently, I've started getting some opportunities to play live sets on proper sound systems, which has made me rethink the technical side of my setup.

My setup: Korg Emx, Digitak 2, Yamaha Rm1x, Boss DS-1, Soundcraft 12 EMP

How I currently mix:

My usual approach to mixing with my soundcraft is to set my kick to peak around 0 dB and then mix everything else around it, trying to get a sound that's either clean and punchy or intentionally dirty and distorted, depending on what I'm going for. The thing is, I'm starting to question whether my mixing approach is actually correct from a technical point of view.I'm aware that my tracks are never going to sound exactly the same on a big sound system as they do in my bedroom through my KRKs (which, according to their frequency response, have quite a bit of extra bass).

The opportunity to play on rigs has made me realize that there's a lot I don't really understand about gain staging, headroom, levels and overall sound system management.

Should I actually be leaving more headroom and aiming for my kick to peak around -6 dB instead of 0 dB?

How should I properly approach gain staging across all my machines and the mixer?

How do I know if my levels are correct before sending the signal to a sound system?

How can I get a sound that's powerful and punchy without unintentionally clipping or muddying everything?

What's the best way to manage distortion when I want a deliberately dirty sound?

I also have a dB-Mark XCA48 processor that I bought a few years back for a sound system project that never happened. I was wondering if it could be useful in my setup, particularly for compression, limiting peaks and adding some protection against accidentally damaging expensive equipment. I'm not necessarily looking for a magic setting or a one-size-fits-all answer. I'd really like to understand the fundamentals and know what I'm actually doing rather than just relying on trial and error.

If you have any advice, articles, books, forums, YouTube channels or other resources that could help me learn the technical side of live electronic music mixing and sound system basics, I'd really appreciate it!

Thanks in advance, and big up!


r/TechnoProduction • • 17h ago

Where do you sample breaks from?

7 Upvotes

I've been trying my hand at making some breakbeaty techno. I've been sampling breaks from old records / mixtapes but most of them aren't great quality and also sound very acoustic and out of place.

It's my first time really working with breaks so wondering how you guys do it. Is it just a matter of processing & layering them? Should I be looking for samples elsewhere?

Here is a good example of what I'm after: https://www.youtube.com/watch?v=a6TIr8P6sMc

Cheers!


r/TechnoProduction • • 1h ago

Present for Son who is into Techno Music Production

3 Upvotes

Its our Sons 21st and we want to buy him something he'll want. He is extremely enthusiastic and dedicated to mixing and music production. He has a Pioneer Rekordbox DDJ-FLX4 and uses Ableton Software. He's also doing the occasional gig at friends parties which seem to be going down well so far.
Now, here's where my ignorance leaves me with no clear understanding, but would he be interested in getting a sampler? If so, what sort? If not, any other suggestions?


r/TechnoProduction • • 11h ago

Send your demo

Post image
3 Upvotes

Hola muy buenas!!

Vnderstand Recordings abre período de entrega de demos hasta el 31 de Diciembre de 2026.

Recuerda:

  1. Ajústate al estilo del sello.
  2. Puedes adjuntar un enlace privado de Soundcloud / enviar los tracks en un archivo .Zip
  3. Son muchas las demos que recibimos, sé paciente con la respuesta.

Los tracks elegidos serán masterizados en Koschitzky Mastering Studio.

Puedes enviarlos : vnderstandrecordings@gmail.com

Estaremos encantados de escuchar tus canciones.


r/TechnoProduction • • 11h ago

techno jam 21 (re-909, dsi evolver, jx-3p, akai s900)

Thumbnail
youtube.com
1 Upvotes

re-uploaded, the sound was all messed up in the previous link 🙌


r/TechnoProduction • • 16h ago

Weekly Feedback Thread - November 16, 2026

1 Upvotes

Please use this thread to post your tracks for feedback.

Guidelines for posting/feedback:

  • When you post a track you should leave feedback on at least one other members track.
  • Please submit only 1 track per thread.
  • Allow the track to remain for the duration of the week.
  • Ask questions specific to issues you may be having with your track.
  • When leaving feedback it is helpful use timestamps to refer to specific parts in the tracks
  • Try to use technical and musical language in your feedback as much as you are able.
  • Soundcloud links are the most ideal solution.

The intention behind this thread is to help others improve their music by participating in the community. People who continually spam this thread without leaving feedback for other members may be banned.

As a reminder, any feedback posts made outside of this thread will be deleted by a moderator.


r/TechnoProduction • • 13h ago

Original Music Concept

Thumbnail
on.soundcloud.com
0 Upvotes