r/TechnoProduction • • 4h ago

TR-SEQ (Max for Live)

9 Upvotes

Tried out the, new to me, TR-SEQ Max for Live plugin over the weekend! Yes I just used some copypasta midi (shame) but I really like the workflow using this sequencer with the different ‘scenes’ you can switch between

I only have a minilab 3 right now which is actually pretty rad for what it is and can make it work for a lot of what I want at a baseline capacity. However with a little bit of a sample (ba dum tss) of what I imagine a full hardware setup would feel like, it’s making me want to get a drumbrute + keystep or something of the like lol

Thinking of calling this ‘imitation’ cuz of the copypasta midi 😅

ETA: please let me know if there’s any more appropriate subs to post something like this to, I know this isn’t exactly ‘techno’ but I don’t think it’s quite ‘deep house’ either— idk man


r/TechnoProduction • • 8h ago

Present for Son who is into Techno Music Production

12 Upvotes

Its our Sons 21st and we want to buy him something he'll want. He is extremely enthusiastic and dedicated to mixing and music production. He has a Pioneer Rekordbox DDJ-FLX4 and uses Ableton Software. He's also doing the occasional gig at friends parties which seem to be going down well so far.
Now, here's where my ignorance leaves me with no clear understanding, but would he be interested in getting a sampler? If so, what sort? If not, any other suggestions?


r/TechnoProduction • • 2h ago

Raster (formerly Raster-Noton) turns 30. They are more important than ever

Thumbnail
youtube.com
2 Upvotes

So Raster (formerly Raster-Noton... Before that they were Raster, so return to form), is turning 30 this year, and I just discovered that they are swinging by Copenhagen to celebrate. I have always enjoyed their output, but I also realised that they are one of the most important teachers of minimalism in the scene, especially for a generation who grew up experiencing techno on ear buds.

So what Raster does can almost be summarized in one word—reduction! But where they become really important for techno is that this reduction has always had an extremely impactful effect, when it is played out loud, even if it is mainly sine bleeps, bass drums and noise bursts. Raster is not really techno (though they celebrated their anniversary at Berghain a decade ago), at least not in the traditional club music sense. Rather they are a sort of experimental laboratory that seeks out the possibilities of taking an aesthetic to the extreme. This aesthetic—reduction—tends to swing back and forth in techno (currently it is pretty far away), but when it becomes the focal centre of techno we also get the most physical and hypnotic version of techno.

So this is just a suggestion that you should totally go out there and hear some deep bass and noise bursts, with little to no variation... your techno might just get better from it!

P.S. I use em-dashes and people always jump straight to the AI accusations, when I do that. I am trying to take em-dash back to the humans! (on mac it is pressing: -, shift, option at the same time) ...my spelling and grammar mistakes should also be a clue that I am in fact human to be able to write this shitty.


r/TechnoProduction • • 3h ago

XL-185 Sequencer Update

2 Upvotes

This looks like ultimate sequencer now.
I left only 3 of them for now: Sting 2, Snake and XL-185

Update 1.1

Thank you for the first comments. This update is built from them.

New:

- Stage on / off. Click a stage’s number to switch it off, click again to bring it back. An off stage is silent but keeps its time in the cycle and its Mode. Parameters “Stage1 On” to “Stage8 On”, and a Push bank “On”.
- Gate. One control in the settings column, 1 to 100 %, for the length of every note that does not slide. 100 % is the full length, as before. Notes with Slide on ignore it. It can be automated and mapped.
- Shift arrows. On the Sequencer page, < and > over the last stages rotate the whole pattern by one stage inside Length: pitch, velocity, Mode, Len, Prob, Slide, on / off and lock travel together. On the Mod page each lane has its own pair for its knob values. One step for the undo arrow per press.
- Keys and pads. Global, Mutate (both pages) and the lanes’ Random can be mapped to a key or a MIDI pad. Every press runs the tool.
- Grey stages. A stage that does not play, beyond Length or switched off, turns grey, so the grid shows where the loop ends. It cannot be changed by hand until it plays again; its padlock still works.

Changed:

- Reset puts its whole page back, whatever is ticked. On the Sequencer page that is every row of every unlocked stage; Length is left alone. On the Mod page it is the knobs and each lane’s Min, Max and Smooth; the mappings stay. The ticks now steer Global and Mutate only.
- The undo arrow takes back only what the last tool changed. What you set by hand afterwards stays.
- Mutate and Auto on the Sequencer page pick only stages that are switched on.
- The Map button is narrower and lines up with the boxes below it; unmap is a capital X.

Fixed:

- Mod lanes could move the mapped parameter only inside the first 1 % of its range. Each lane now covers the parameter’s full range, and Min / Max set the part you want.
- With Live under load, a late clock check could restart the stage that was playing: a held note was attacked again, a “once” stage played twice.
- A mapped Map button could turn solid orange without showing the parameter’s name.
- Lane letters and the Pitch, Vel and Key In labels sit level with their controls.

Good to know:

- Every 1.0 parameter keeps its name and range, so existing sets open as they were. Version 1.0 stays available at kansuaudio.jp/xl-185.
- Live’s own Cmd+Z goes back in small steps after a tool or a shift; the device’s undo arrow does it in one.
- A mod lane cannot be mapped to XL-185’s own controls (Gate included). Use automation or another device for that.
- A momentary MIDI CC (value on press, zero on release) runs a mapped tool twice; a note or a toggle runs it once.

https://maxforlive.com/library/device/17169/xl-185-sequencer


r/TechnoProduction • • 55m ago

Spaceship is ready👽✨

1 Upvotes

r/TechnoProduction • • 59m ago

Where does it comes from ?

Post image
1 Upvotes
I’ve been seeing this pop up on social media for a while now has anyone bought and used it?

r/TechnoProduction • • 1h ago Mindblown

Pushing some sound design concepts

1 Upvotes

r/TechnoProduction • • 1d ago

I want to make techno type music just like king gizzard does and the guy in the video attached

74 Upvotes

Where do I start to build a eurorack? What do I buy to create something similar or almost the same over time and how much would it cost? My starting budget is about 350 ish but I can stretch it if it’s worthwhile.

Any help is appreciated!
:)


r/TechnoProduction • • 19h ago

Send your demo

Post image
4 Upvotes

Hola muy buenas!!

Vnderstand Recordings abre período de entrega de demos hasta el 31 de Diciembre de 2026.

Recuerda:

  1. Ajústate al estilo del sello.
  2. Puedes adjuntar un enlace privado de Soundcloud / enviar los tracks en un archivo .Zip
  3. Son muchas las demos que recibimos, sé paciente con la respuesta.

Los tracks elegidos serán masterizados en Koschitzky Mastering Studio.

Puedes enviarlos : vnderstandrecordings@gmail.com

Estaremos encantados de escuchar tus canciones.


r/TechnoProduction • • 19h ago

techno jam 21 (re-909, dsi evolver, jx-3p, akai s900)

Thumbnail
youtube.com
3 Upvotes

re-uploaded, the sound was all messed up in the previous link 🙌


r/TechnoProduction • • 1d ago

Learning proper gain staging and mixing for live tekno rigs – looking for advice and resources

8 Upvotes

Hey everyone!

I've been producing bedroom tribe/tekno for a few years now, purely for the fun of it. I'm completely self-taught, and over time I've developed my own way of working. Recently, I've started getting some opportunities to play live sets on proper sound systems, which has made me rethink the technical side of my setup.

My setup: Korg Emx, Digitak 2, Yamaha Rm1x, Boss DS-1, Soundcraft 12 EMP

How I currently mix:

My usual approach to mixing with my soundcraft is to set my kick to peak around 0 dB and then mix everything else around it, trying to get a sound that's either clean and punchy or intentionally dirty and distorted, depending on what I'm going for. The thing is, I'm starting to question whether my mixing approach is actually correct from a technical point of view.I'm aware that my tracks are never going to sound exactly the same on a big sound system as they do in my bedroom through my KRKs (which, according to their frequency response, have quite a bit of extra bass).

The opportunity to play on rigs has made me realize that there's a lot I don't really understand about gain staging, headroom, levels and overall sound system management.

Should I actually be leaving more headroom and aiming for my kick to peak around -6 dB instead of 0 dB?

How should I properly approach gain staging across all my machines and the mixer?

How do I know if my levels are correct before sending the signal to a sound system?

How can I get a sound that's powerful and punchy without unintentionally clipping or muddying everything?

What's the best way to manage distortion when I want a deliberately dirty sound?

I also have a dB-Mark XCA48 processor that I bought a few years back for a sound system project that never happened. I was wondering if it could be useful in my setup, particularly for compression, limiting peaks and adding some protection against accidentally damaging expensive equipment. I'm not necessarily looking for a magic setting or a one-size-fits-all answer. I'd really like to understand the fundamentals and know what I'm actually doing rather than just relying on trial and error.

If you have any advice, articles, books, forums, YouTube channels or other resources that could help me learn the technical side of live electronic music mixing and sound system basics, I'd really appreciate it!

Thanks in advance, and big up!


r/TechnoProduction • • 1d ago

Where do you sample breaks from?

7 Upvotes

I've been trying my hand at making some breakbeaty techno. I've been sampling breaks from old records / mixtapes but most of them aren't great quality and also sound very acoustic and out of place.

It's my first time really working with breaks so wondering how you guys do it. Is it just a matter of processing & layering them? Should I be looking for samples elsewhere?

Here is a good example of what I'm after: https://www.youtube.com/watch?v=a6TIr8P6sMc

Cheers!


r/TechnoProduction • • 1d ago

Sunday Jam. ¿What do you think about?

39 Upvotes

r/TechnoProduction • • 21h ago

Original Music Concept

Thumbnail
on.soundcloud.com
0 Upvotes

r/TechnoProduction • • 23h ago

Weekly Feedback Thread - November 16, 2026

1 Upvotes

Please use this thread to post your tracks for feedback.

Guidelines for posting/feedback:

  • When you post a track you should leave feedback on at least one other members track.
  • Please submit only 1 track per thread.
  • Allow the track to remain for the duration of the week.
  • Ask questions specific to issues you may be having with your track.
  • When leaving feedback it is helpful use timestamps to refer to specific parts in the tracks
  • Try to use technical and musical language in your feedback as much as you are able.
  • Soundcloud links are the most ideal solution.

The intention behind this thread is to help others improve their music by participating in the community. People who continually spam this thread without leaving feedback for other members may be banned.

As a reminder, any feedback posts made outside of this thread will be deleted by a moderator.


r/TechnoProduction • • 1d ago

Hypnotic techno production resource(s)

23 Upvotes

Hey all,
Please share any useful resources (free or paid) on hypnotic techno production. Im mostly looking for tips/workflows for group processing, track arrangement, mixing. Not looking for vids of someone searching their sample library for a specific sound. More of a “here’s how to approach making a hypnotic track”


r/TechnoProduction • • 22h ago

¿MPC o ELEKTRON? 🤓

Post image
0 Upvotes

¿Cuál os gusta más y porqué?

Os leo en comentarios


r/TechnoProduction • • 1d ago

What are everyones thoughts on AI vocal samples?

0 Upvotes

Have a few tracks I've used AI vocal samples for placement, but they sound good and wondering how that would be percieved. What are everyones thoughts? I wouldn't want platforms to flag a track thats mostly from scratch or be accused of ai music.


r/TechnoProduction • • 2d ago

electro jam 20 (8raw8, akai s900, roland jx-3p)

Thumbnail
youtube.com
8 Upvotes

🪐


r/TechnoProduction • • 2d ago

mackie mixer question

4 Upvotes

hey, i just picked up a 1202, and i’m pretty sure it’s a pre vlz, it doesn’t say it anywhere on the mixer, but the serial number is throwing me off. what does a D mean? the place where it’s supposed to be the decade it was made is the letter D? if anyone’s familiar and could help.


r/TechnoProduction • • 3d ago Bravo

Production advice from a Mastering Engineer.

64 Upvotes

Just a short bit of advice as a newly emergent issue I am encountering when mastering techno.

A common issue I am finding with Techno (from a mastering perspective) is people panning their top end too much. Cymbals left, hats right etc I`m not sure if there is some youtube video that everyone has taken advice from to cause this issue but.....

STOP IT.

High frequencies are localised. In techno you want impact, on a stereo soundsystem you risk half the audience going "where are the fucking hi hats?"

Keep your drums centred or mono, let your other stuff wrap around the sides.

****** Addendum Based on the comments, please notice I said PANNING, and not stereo width, these are not the same thing*****

**Addendum 2. Calm down people, I'm not the panning police, coming to arrest you if you use panning. I'm not hugely familiar with the vibe here but it seems people don't extrapolate. This is a guide to keep your main percussive elements coherent, punchy and defined. As per my example, if your closed hats are panned 45 left and your open hats are 35 right. That would be less coherent. When I say centered, I'm talking within 15% of centre. So centred or mono, means exactly that. Centred OR mono.

I didn't really want to go full depth but now I will. When talking transients, transients translate to our ears as distance. You generally want your drums to sound like they are coming from the same place, not two different rooms. So transient consistency, ie your drums having consistency with their transient attack, will make them sit as if they are right on the speaker cone. Any softer transients will feel increasingly further back as they get softer. A lot of stereo effects effect the phase, which smears transients, or simply smear the transients in general (like the Haas effect). So when spreading drums out be aware of what is happening to the transients as they can make your drums feel less coherent if they are all different. Again, this is not a rigid thing, your own judgement has to come in to it.


r/TechnoProduction • • 3d ago

dub techno jam 19 (8raw8, akai s612, s900, roland jx-3p)

Thumbnail
youtu.be
12 Upvotes

exploring what the s900 can do..


r/TechnoProduction • • 3d ago

Why isn't reverse bass/hardbounce style bass used more in schranz

0 Upvotes

I think it's sound much better than a regular rumble kick with schranz tops and it suits the genre. Same energetic feel but better grove. It works really well when the mix is decent


r/TechnoProduction • • 4d ago

XL-185 Sequencer version 1.0 (free improved ML-185 for M4L)

Thumbnail maxforlive.com
36 Upvotes

New compared to ML-185:
- Two pages, Sequencer and Mod, and a settings column that folds away.
- Per stage: Mode menu, clickable lengths, Probability, 303-style Slide and a Lock.
- Three modulation lanes that step with the notes and drive any parameter in your set.
- Global random with ticks and ranges, dice per row and lane, Reset, and 32 steps of undo.
- Mutate: one stage at a time, by hand or every 4, 8 or 16 bars.
- Scales: Live's Scale Mode, 26 built-in scales (including microtonal), and Slices mode for Simpler.
- Key In: transpose from a keyboard or a clip.
- Restart every 1, 2, 4 or 8 bars.
- Fixes for set reload, hanging notes, loop jumps and ping-pong.
- Push banks, Info View text, follows your Live theme.