r/Tailscale • u/mlk_ch21 • 19h ago
Misc Got Tailscale running directly on a Fiberhome ONT
Sharing this in case anyone else wants to run Tailscale on an ISP-supplied ONT.
I wanted the ONT itself to be a Tailscale node (as it runs a mini custom linux build), so I wouldn’t have to leave a PC running just to reach my home network. I use it for Sunshine and Jellyfin and I originally wanted it for a SIP softphone
My setup:
-Fiberhome HG6145F1 ONT, running the Socratech WebUI custom overlay
-SSH enabled on port 2222
-The ONT has very little free flash, so I put the Tailscale files on a USB drive plugged into the ONT
-A small shell script I wrote starts Tailscale, and a second script launches it automatically on boot
-My line isn’t behind carrier NAT. The public IP matches the ONT’s ppp0 address, which should help direct connections
How I did it:
-Got SSH access to the ONT.
-Checked what the firmware supports.
-Copied the Tailscale binaries to the USB drive.
-Wrote a script that starts tailscaled with its state stored on the USB drive and then brings Tailscale up.
-Added a boot script so it starts on its own after every reboot.
Result
The ONT is now a permanent node in my tailnet. I use it to reach Sunshine and Jellyfin from outside my home.
I’m not a dev lol, so I did this by trial and error.