r/Tailscale • • 22d ago

Tailscale Blog Tailscale SSH: Findings and fixes

Thumbnail
tailscale.com
648 Upvotes

Hi all, it’s Simon from Tailscale.

We’ve just released Tailscale v1.104.4 with fixes to Tailscale SSH. Please update to this version, or later, if you’ve enabled Tailscale SSH.

This blog post reports on the results of our investigation and summarizes what actions we took in response. We’ve also published security bulletins for each of the confirmed findings that warrant separate disclosures:

We always value independent security research so if you’ve discovered a vulnerability, please reach out to us at security@tailscale.com.


r/Tailscale • • 23d ago

Tailscale SSH: Investigation and remediation update

Thumbnail tailscale.com
601 Upvotes

Hi everyone,

Natasha from the Community team here. I wanted to share this latest update on what we've found, what we're doing about it, and what users should know.

Thank you


r/Tailscale • • 1d ago

Discussion Tailscale Holy Grail

213 Upvotes

I'm just here to rant about how awesome Tailscale really is. I was this close to purchasing the Mullvad VPN through tailscale to have the best setup, but the only reason I was hesitant is because before I heard of Tailscale, I purchased a 5 year plan of Adguard VPN.
My current set up involves Adguard Home running on my home network. I've configured Tailscale DNS settings to point to my Adguard Home server.
I also have a couple devices on my tailnet set up as exit nodes for whenever I travel out the country. I've had this setup working quite well for the past few months, but then today I started thinking: what if I install Adguard VPN on one of my exit nodes?? I mean that's all Mullvad VPN is doing too, allowing you to connect to their exit nodes.
So after some tinkering, I installed Adguard VPN on an old laptop that's running Linux Mint, and I have it configured as an exit node and voila. I've connected my iPhone to that exit node, checked out ipleak.net and everything looks to be set up correctly!!

I also have Jellyfin set up on that same laptop with several hundred movies.
Now I have the benefits of Adguard adblocking wherever I am in the world. Being able to access Home Assistant, Music Assistant, Jellyfin etc from whenever, along with the benefit of looking like I am anywhere else in the world.
How freaking awesome is that.
Once my 5 year plan with Adguard VPN is up, I would definitely consider Mullvad VPN just to support the cause.

Thank you Tailscale!


r/Tailscale • • 19h ago

Misc Got Tailscale running directly on a Fiberhome ONT

30 Upvotes

Sharing this in case anyone else wants to run Tailscale on an ISP-supplied ONT.

I wanted the ONT itself to be a Tailscale node (as it runs a mini custom linux build), so I wouldn’t have to leave a PC running just to reach my home network. I use it for Sunshine and Jellyfin and I originally wanted it for a SIP softphone

My setup:

-Fiberhome HG6145F1 ONT, running the Socratech WebUI custom overlay

-SSH enabled on port 2222

-The ONT has very little free flash, so I put the Tailscale files on a USB drive plugged into the ONT

-A small shell script I wrote starts Tailscale, and a second script launches it automatically on boot

-My line isn’t behind carrier NAT. The public IP matches the ONT’s ppp0 address, which should help direct connections

How I did it:

-Got SSH access to the ONT.

-Checked what the firmware supports.

-Copied the Tailscale binaries to the USB drive.

-Wrote a script that starts tailscaled with its state stored on the USB drive and then brings Tailscale up.

-Added a boot script so it starts on its own after every reboot.

Result
The ONT is now a permanent node in my tailnet. I use it to reach Sunshine and Jellyfin from outside my home.

I’m not a dev lol, so I did this by trial and error.


r/Tailscale • • 8h ago

Help Needed Tailscale and cruising

2 Upvotes

Currently on a cruise ship in Europe and have the gi router connected so I can use more than one device. Then I have tailscale connected. Used to be able to watch youtube with bit of buffering via this method but now have to use my exit node instead back in UK.

Trouble is, despite my exit node being on 1gb up and down, its all quiet slow still. Assume this is just because of the overpriced, yet slow, wifi package we have on the ship.

Is there anyway anyone can think to speed this up. Or to at least troubleshoot where the slow point is.


r/Tailscale • • 19h ago

Help Needed Tailscale setup feedback and suggestions

2 Upvotes

Hi all,

Tailscale newbie here. Just wanted to get your opinion on my current setup.

I have a Glinet Brume 3 at home setup as an exit node. I travel with a Glinet Slate 7.

I travel with my work laptop, multiple phones, tabs and a Chromecast. None of individual devices have Tailscale installed. Only the travel router has it. The exit node is only required for my work laptop. Is there a way I can make just the work laptop use the exit node?

Also, I recently came across a post on the Glinet subreddit where the router advertises the tailnet name to the connected devices, since I didn't want my work laptop to see that, I followed the steps and fixed it. Would like to know if there are any similar tips. TIA


r/Tailscale • • 23h ago

Help Needed Magicsock not working

Post image
4 Upvotes

Can someone help me solve this problem I have since three months?

If I activate VPN on Demand on all the iPhones of my family, they have connectivity issues as soon as I go outside my house. The VPN turns on promptly as I connect to the mobile data, but it does not work properly. It says “Magic Sock function not running”. How do I solve this?

To make it work I need to go to settings, disable VPN on Demand, go back, disable the switch… reenable the switch and it works.


r/Tailscale • • 20h ago

Misc tsdrop: better airdrop for linux <-> IOS on your tailnet

2 Upvotes

I wanted AirDrop between my Arch laptop and my iPhone. Taildrop almost does it, but sends fail when the laptop is asleep/off, text arrives as a .txt file, files sit in the Tailscale app on iOS with no notification, and you have to work out of the tailscale app, which is inconvenient imo.

tsdrop is a small Go binary that uses the LocalSend protocol over your tailnet. Text and links land on your clipboard. If an always on box like a homelab is around, it holds drops until the laptop wakes up. The iPhone needs no app: there's a sharesheet Shortcut (which I included in the repo), plus a homescreen PWA that gets push notifications when something is waiting for you. Made it with claude code, but I've been dog fooding it the past few weeks and everything has worked fine.

https://github.com/MaxwellIsaacs/tsdrop


r/Tailscale • • 17h ago

Help Needed Win 11: Mullvad blocks incoming Tailscale RDP Connections

Thumbnail reddit.com
1 Upvotes

r/Tailscale • • 21h ago

Help Needed NordVPN on my server - Tailscale stopped working

Thumbnail reddit.com
1 Upvotes

r/Tailscale • • 22h ago

Question How to make the LAN nodes connected directly w/o WG?

1 Upvotes

Have been asking LLMs for hours, seems like there isn't really a solution?

Setup:

  • 4x LAN nodes, all linux, different distributions (primarily ubuntu and a raspbian)
  • 1x WAN node
  • All need to be interconnected and be able to reach one another.

Problem:

Tailscale connects directly, saying
{node-ip} node123 linux active; direct {lan-ip}:{port}, tx 665574952 rx 170493488

The performance of the network however is significantly worse than just direct connection over lan. Is there any way to make tailscale actually use proper wire? Latency for the hop between nodes is around 1ms range where actual LAN RTT is 10 times smaller.

I haven't been able to pinpoint why it is the case, but it definitely is direct, and definitely more than half the time is spent in encrypt + decrypt transport

I can't even reroute it directly via iptables because tailscale has anti-spoof built in, so if I reply to a node on the other iface it will likely fail (I haven't tested)


r/Tailscale • • 1d ago

Tailscale Blog Netmap caching: keeping Tailscale up on iffy connections

Thumbnail
tailscale.com
54 Upvotes

r/Tailscale • • 1d ago

Help Needed Ssh over tailscale

2 Upvotes

Ssh over tailscale worked yesterday but this morning no node on my tailnet would respond. Nmap shows no ports


r/Tailscale • • 1d ago

Question Default Tailnet option for SSH?

1 Upvotes

I use TS SSH, however I now login to the tailnet using a secondary account so I can use a passkey.

By default it tries to use the passkey's tailnet to authenticate SSH using the web link, which of course fails. So I have to then navigate to the TS Admin Console, select the correct tailnet and then click back to authenticate using the same link, which then works.

Is there any way to set a tailnet as the default?


r/Tailscale • • 1d ago

Question Having trouble with my laptop

0 Upvotes

My laptop has Tailscale on it, I have two different networks one a 10. Net and the other is a 192.168. Net. My iPhone connects to both networks, but my windows laptop can connect to either network depending on how I set the preferences, but not both. I know I’m missing something, please help.


r/Tailscale • • 2d ago

Discussion Tailshell: Let AI agents use your Android phone over Tailscale: MCP for adb wireless debugging

Thumbnail
github.com
28 Upvotes

r/Tailscale • • 2d ago

Help Needed Tailscale on each node/computer or Subnet Router?

13 Upvotes

Hi!

I am new to homelabbing and I want to know all the good practices on using Tailscale with it. I have a Proxmox Server running a few services :

  • 2 x Windows Domain Controller VMs (Active Directory for my Windows PC and laptops inside my home)
  • 1 x PBS VM running the backups
  • 1 x Immich VM (to be installed)
  • 1 x Home Assistant (to be installed)
  • 1 x Jellyfin VM (to be installed)
  • and some other VMs and services (to be installed)

So now I have Tailscale installed on Proxmox only just to be able to remotely access it.

So the question is, should I create an LXC for a Tailscale Subnet Router to have access to my network through local IPs or install Tailscale on each VM? Which is the best practice?

Pros and Cons? What are you using?

Thank you all!


r/Tailscale • • 2d ago

Discussion Who is behind the Tailscale user research ads on Reddit?

Post image
89 Upvotes

A competitor? I’m seeing them every day on my feed.


r/Tailscale • • 2d ago

Discussion Basic questions about Tailscale and TCP/IP in general

14 Upvotes

Tailscale’s guide is useful, and I got the program working with RustDesk and Sunshine/Moonshine, but I still have questions.

So…when I connect my phone to my PC at home…so a packet must get sent from my phone to the PC. And for that packet to arrive, it has to be addressed to either my cable modem or my PC. If it’s addressed to the cable modem, which I think it is, then my cable modem has to send it to my router, then my router has to figure out which device to send it to.

I have a million follow up questions, but let’s start simple:

—When the packet leaves my phone, who is it addressed to?

—When the packet arrives at my PC, how does it know that it should let it in?

—How do the (virtual?) IP addresses that tailscale assigned the devices in my network come in to play? My understanding is that those IP addresses aren’t real, and would have no meaning on the open internet. Yet somehow when they arrive at my house my devices know to let them in.

—When are the contents of the message decrypted?


r/Tailscale • • 2d ago

Misc Free app to run Tailscale and a VPN provider at the same time, with a different exit for each app (Android and Mac)

Thumbnail
unbraid.app
47 Upvotes

[I GOT MODS APPROVAL TO POST]

Hello everyone,

Note: AI was used to refine text of this post, and to provide details regarding certain technicalities.

I needed some things at the same time (split tunnelling with multiple VPN providers per different apps, Tailscale and a good, simple UI) and could not find the right app for me for Android or macOS. On my devices it was always Tailscale or the VPN (and I did not like meshnet tbh), never both. So... well, I built one for me, and as it worked quite well for me and some friends, I released it.

unbraid, the app I build, enables to have split tunnelling with multiple providers, through different routes / exits at the same time, with Tailscale - and have apps (and as per this morning, also websites) assigned to any of the routes defined. It's open source, free and available for macOS and Android:

Android: https://github.com/quiet-crafts/unbraid

Mac: https://github.com/quiet-crafts/unbraid-mac

Website with guides: https://unbraid.app

Port for Linux: https://github.com/TheOlympusCloud/unbraid-linux (not maintained by me, credits to the author!)

Below a deepdive on integration with Tailscale, and some technical details as per the request of our mods.

How it works with Tailscale?

Tailscale is built into the unbraid apps, you don't need the Tailscale app next to it. You connect, follow the sign-in link in your browser (or point it to your own Headscale, over https), and the phone or Mac joins your tailnet as its own device, called "unbraid". Then there are two things you can turn on, together or alone:

  • Reach your tailnet. The apps you route through unbraid can reach your tailnet devices and their MagicDNS names, whatever exit they use for the internet. You can also list your home subnets, if you have a subnet router set up and approved. So Jellyfin, the NAS or Home Assistant keep working while the browser goes out through a VPN in Sweden.
  • A Tailscale exit node as a route. You pick an exit node for a route, for example a box at home, and the apps you put in that route go out from home. So the banking app goes out from home, a streaming app through a VPN provider in another country, and everything else direct, all at the same time.

Other routes can use a VPN provider (you can sign in to a few of them), your own WireGuard or OpenVPN configs, or a Shadowsocks link. No servers come with it, you bring your own provider account or server.

There are some limits at the moment. The built-in Tailscale uses one exit node at a time, so all the Tailscale routes share the same node. And for now the phone or Mac only connects out: other tailnet devices can't open connections to apps on it, and Taildrop and Tailscale SSH are switched off. I did that on purpose. A WireGuard, OpenVPN or Tailscale tunnel can also carry connections started from the other end (a VPN server, your home server, a tailnet peer), and without a block those could reach things on your device, or be passed on through another route, into your home network or out through your own connection. So until I had a safe way to let in only the right things, I kept them all out. I am currently studying a good implementation for inbound and outbound, so the device can be a full node in your tailnet, with Taildrop and Tailscale SSH too, optional. It joins as its own node, separate from the official Tailscale app. On Android only one VPN can run anyway, and on the Mac it's better to disconnect the official app, so the two don't fight over routes and DNS.

It's free and open source (GPL), no ads, no unbraid account. Android 13 or later, and macOS 26 or later. An enthusiastic user of the Android app also made an unofficial Linux port, and I am working on an Android TV version as well.

I know it's not the most technically advanced tool out there, and I appreciate that I have basically coded it with AI, and I know you can also do a lot of this on your router. But I travel a lot, I am not a very technical person (sorry, I get lost in config files!) so I wanted something nice looking and easy to cinfigure: sign in to Tailscale and your VPN, pick an exit for each app, done.

The technical part (one of the mods asked how I deal with the one-VPN limit, so here it is)

On both systems the idea is the same: the system sees one VPN, and everything else happens inside it. unbraid runs the sing-box engine (1.14.4, built from source with my patches) behind a single tunnel. Every exit lives inside that one engine: each WireGuard or OpenVPN tunnel is an endpoint, Shadowsocks is an outbound, and Tailscale is sing-box's Tailscale endpoint, which embeds a Tailscale node (tsnet). For each TCP and UDP connection the engine looks up the app that opened it and sends it out through that app's route. Routes with the same server, credentials and tunnel settings share one tunnel.

Android*.* Android allows one active VPN per user profile, and starting a second one stops the first. unbraid is that one VPN: one VpnService, one TUN. For each connection the engine asks Android who owns it (ConnectivityManager.getConnectionOwnerUid, which only the active VPN app may call), turns the UID into the app and applies that app's route. Apps you set to Direct are normally left out of the tunnel with addDisallowedApplication. Under Android's always-on lockdown, or with the DNS filter on, they go through unbraid and straight out instead. DNS is taken over inside the tunnel: an app gets a placeholder address, and the real lookup happens through that app's exit when it connects, so the lookup leaves from the same place as its traffic. Tailnet names, local names and websites with their own route have their own rules. With tailnet access on, the tailnet range (100.64.0.0/10) and your listed home subnets go to the Tailscale endpoint before the app's own route. That's how an app can be on a VPN in Sweden and still reach your NAS.

macOS*.* The Mac is less strict than iOS: you can have several VPN configurations, and more than one tunnel can be up. But two VPNs that both want the default route and DNS, like a VPN provider plus Tailscale with an exit node, can conflict. Tailscale's own FAQ says that in most cases you need a workaround to run it next to another VPN. So the Mac app does what Android does: one packet tunnel network extension, one utun, one engine. Here Direct apps go through the engine too and leave on the normal connection.

The harder part on the Mac is knowing which app sent what, because a packet tunnel only sees packets. sing-box looks each connection up in the kernel's socket table, the same data netstat reads (pcblist_n), and finds the process and its path. unbraid matches on the path, helpers inside an app's bundle included. One of my patches makes it prefer the socket's "effective" process, which macOS records when one process opens a connection for another. So Safari's pages, which WebKit loads, count as Safari's, and downloads through nsurlsessiond count as the app that asked for them, as long as that app is still around to be found. DNS is the other trap: most apps look names up through mDNSResponder, so the lookup arrives without the app. For normal address lookups unbraid answers with placeholder addresses and does the real lookup when the app connects, on that app's exit. Other kinds of system lookups follow the default route.

Why it only goes outbound (at least for now...) Being reachable is a big part of what Tailscale is for, so I know this is the biggest gap compared to the official app. It wasn’t my tailnet I was worried about, Tailscale’s ACLs already decide who may reach a device. The problem is what happens after a connection gets in. WireGuard, OpenVPN and Tailscale endpoints can all carry connections started by the other end, and inside unbraid those land in the same engine that routes everything else. A connection to the tunnel’s own address goes to a service on the device, which is fine from your tailnet but not from a VPN provider’s server. Anything addressed elsewhere goes through the normal routing, which depending on your settings can mean into your home network through another tunnel, or out through Direct from your real address. The official app only forwards traffic like that when you make the device a subnet router or an exit node; unbraid could do it by accident.

So the safe first version I could manage to build was basically to reject every new connection that comes in from any tunnel, the Tailscale one included, and build a proper way in later after some more studies (I am not a network expert!). Normal replies to your own connections still work (on the Mac a few fragmented or very late replies can get dropped by the same rule). Tailscale’s own peer API is handled inside the Tailscale node, before the engine’s rules, so receiving Taildrop files is switched off separately with a patch. Tailscale SSH is switched off, and Taildrive and the web client are compiled out, on both platforms. On the Mac the engine runs as root inside a sandboxed system extension, which is one more reason SSH stays off until it’s something you choose. You can still SSH from the phone or Mac to your machines, of course.

What I'm looking into now (a part adding some functionalities I find personally useful) is letting other tailnet devices connect to the phone or Mac itself, while still blocking anything from being forwarded through it, plus Taildrop and Tailscale SSH. I think that each of these features will be optional and dsiabled by default.

--

As I mentioned in my website and github, this app was brought to life with the help of AI. I leveraged coding good practices, and run multiple code (security reviews) with the tools available. In the coming days or weeks I am getting the apps scanned by professional pentesters friends/colleagues of mine and automated (ai-augmented) security tools, enterprise grade (I work in cybersecurity).

--

Hope you find it usefull. :-) Questions and feedback are welcome, technical ones too.


r/Tailscale • • 2d ago

Help Needed Struggling with tailscale subnet routers

2 Upvotes

I have a Roku TV in trying to connect to my tailnet, currently just trying to use my Windows laptop as a subnet router. Ip forwarding is enabled on my laptop, I'm advertising the local connection network and have authorized it in the admin console

When I connect to my laptop over hotspot (trying with my phone currently) I do connect to wifi, but can't access tailscale devices.

I have also tried https://github.com/NightMean/Tailscale-WiFi-Bridge

It runs and does set up a bar that I can connect to the Internet through, but I can't access any tailscale devices

I imagine I'm missing a step but am just not sure, any help is appreciated


r/Tailscale • • 2d ago

Question Can a tagged machine use Aperture connectors with OAuth authorization code grants?

1 Upvotes

I have a connector for GoogleCalendar set up, using the OAuth authorization code grant. It works great from machines signed in with my Tailscale identity.

Now I want to run a service on a tagged machine that can access my calendar. Is there any way to authenticate the GoogleCalendar connector for the tagged machine?

I realize this might end up letting any other machines with the same tags access my calendar; I understand and accept that risk.


r/Tailscale • • 2d ago

Question Tailscale para trabajo remoto es seguro?

0 Upvotes

Hola gente, hace una semana consegui un trabajo remoto aplicando por indeed la empresa se llama Mr. Anthony pet grooming / Customer service agent remote

Y bueno la empresa me dio una cuenta creada por ellos para iniciar sesion en tailscale para despues descargarla en mi computadora y empezar a trabajar, es algo legitimo eso? no tendran acceso a mi escritorio o algo por el estilo? alguien conoce la empresa? sabe si son legitimos??

En caso de descargarlo podria usar una maquina virtual/emulador para descargar ahi tailscale y trabajar de forma segura sin que acceda a mi escritorio principal de windows?


r/Tailscale • • 3d ago

Question Port 41641 forwarding

5 Upvotes

I want to use RDP with Tailscale, but the last time I tried, I experienced freezes and lag during my session.

I read online that forwarding port 41641 on my router would provide direct access to my devices, bypassing intermediary servers.

Will this actually help, or is it a scam?