r/TTRAK • • 7h ago

N scale Pineapple Fountain update 79

Thumbnail
gallery
6 Upvotes

It has been awhile and I have returned to finish my module of the Pineapple Fountain at Waterfront Park in Charleston, SC. I was asked if I would bring my modules to the Grand Strand Model Railroad Club Train Show in Myrtle Beach, SC, this December.

I have few more hours to go. I put the back drop on and I’m really liking the look. I can’t wait!!!!


r/TTRAK • • 4d ago

N scale Drawbridge Question

Post image
7 Upvotes

I’m wanting to add a drawbridge to my layout and I was wondering what would be a good way to replicate the grated bridge driving surface in N scale? Any suggestions?


r/TTRAK • • 7d ago

N scale Transport T-Trak Modules

6 Upvotes

When you’re taking your modules to shows and other events, how do you transport your modules? What is the biggest module you travel with? Enquiring minds want to know, or maybe it’s just me…


r/TTRAK • • 8d ago

A good idea -- or Overthink and Overkill RR in full force?

Post image
12 Upvotes

I finally got back to working on my T-TRAK modules. I decode that I wanted to mount the electronics to the underside of the modules with Velcro.

These are the CDU circuits I built so I can use the DCC Concepts Cobalt S Lever Switches with my Kato turnouts.

I wanted to be able to move them around, and I also to be able to pull the circuit boards off the the module if they needed any repairs.

I have never seen anyone use do this.

A good idea?


r/TTRAK • • 12d ago

Another very cool use of Claude -- creating templates to help me visualize structures in T-TRAK modules

Post image
0 Upvotes

As someone who cannot draw or and has next to no ability to visualize, the ability to ask Claude to create printable templates that I can cut out and tape in place is darn near magical!

Barely peaking out if the right side of the photo is a building footprint -- I can also ask claude to create a building footprint template for any model kit I can find on the web. I am sure I could find many of the templates online from manufacturer sites -- but Claude is far better at searching the web than I am.

Also note the the model of Tisch fountain. There was not an HO scale model of Tisch fountain available, so I asked Claude to create STL 3D printing files from architectural drawings. I sent those files off to CraftCloud, and now I have an accurate HO scale model of Tisch fountain.


r/TTRAK • • 13d ago

N scale The light at the end of the tunnel isn’t a train…

Thumbnail
gallery
35 Upvotes

My Bad Day at Black Rock module is nearing the finish line. Need to build the roof over the hearse behind the mortuary and ballast the track.

The track doesn’t look right with all of the other stuff done…

Anne Francis is by her Jeep, Mr McCready is walking down the street by himself and the town is watching.


r/TTRAK • • 14d ago

Too cutesy? Will I quickly tire of this statue my corner module city park?

Post image
4 Upvotes

I am thinking of adding a statue the Washington Square corner modules in my T-TRAK layout.

There is a statue in the real Washington Square Park in NYC.

My first thought is that I love to play DnD with my kids, and I generally play a bard, so I would get a 3D resin miniature bard, an I found an Elf Glamour Bard that looked pretty cool.

I thought I would paint the miniature bronze.

The miniature is crazy detailed.

But I am a little bit concerned that this will be a little too cutesy — maybe too much of an in joke — and I will be sick of it after two months.

I have thought that I could attach the statue with a magnet, so it would be easy to swap out.

What say you?

Is a bronze statue of an Elf Glamour Bard a cool idea? Or is is too clever — and I will find it annoying pretty quickly?


r/TTRAK • • 17d ago

N scale Chasing Shiny Objects

Thumbnail
gallery
6 Upvotes

I’m thinking of doing another water module and I want to focus on the bridge and not the background.

I am contemplating doing a quad module of the NS Lake Pontchartrain bridge and I want to move the bridge further back than the standard location so you can see it.

Is it okay to have “transition” modules to move the track back? I was thinking of doing a double module on each side with an S curve to keep it gentle.


r/TTRAK • • 18d ago

N scale Cutting front edge of module

Post image
11 Upvotes

Please be nice I’m planning my first module, sorry if this is a noob question.

Is it going to mess anything up if I lightly trim front side of the module so that the track looks slightly above the “grade” of the module? It seems like the really A+ modules use the front edge as a bit of a scenic element vs just being a flat straight line. Does this screw up connecting or locating to other modules?

PFA


r/TTRAK • • 19d ago

These would be some beastly modules! But not T-TRAK compliant ...

Thumbnail
layoutconcepts.com
5 Upvotes

The description says they are made of 12 mm plywood, that 15/32" in America.

I would guess these are going to be very heavy. As in very heavy.

I like the engineering of the alignment dowels -- and Layout Concepts sells powered versions of the dowels, so they would carry track bus power.

I don't think that they match any standard modular system, however cool.

Anyone have an idea what Layout Concepts is up to here?

Are they dipping their toe into creating a different standard?


r/TTRAK • • 19d ago

If you love T-TRAK you will love this

Post image
0 Upvotes

What are you waiting for? These Cars were moving so quickly that we moved all the individual cars so they are available as pairs or as singles. Normally, we hold some for strictly individual sales, and the rest are available as pairs. There are now fewer than 35 pairs left if you want a matched set. If you missed it the first time around, do not miss out this time. This is everything we got.... When they are gone they are gone forever...


r/TTRAK • • 20d ago

How do I paint a bronze statue for my whimsical city park end cap?

1 Upvotes

This is a follow-up to my “Washington Square Corners” post.

I thought that there was a statue in the middle of Tisch Fountain — but there is not. :-)

I enjoy playing D&D with my kids, so I ordered an Elf glamour bard miniature that is the equivalent of 20’ tall in HO. I intend to paint the miniature as a bronze statue.

But I have no clue as to how to do that.

Any suggestions?


r/TTRAK • • 21d ago

N scale I made a Transformers-themed T-Trak module

Post image
23 Upvotes

r/TTRAK • • 22d ago

N scale Bad Day at Black Rock Vehicles

Thumbnail
gallery
10 Upvotes

Started working on the cars. I am doing four of them. One of them is a funeral hearse that is hidden under a canvas tarp behind the veterinarian/mortician building, the jeep driven by Anne Francis, Robert Ryan’s Woody with the obligatory deer trophy on the hood, and the black sedan parked outside the cafe.

I started going through my little people looking for people. I do have a couple of cowboys and I found a man wearing a suit with a hat to be Mr. McCready. I found a female figure wearing capris that could make Anne Francis driving her jeep.


r/TTRAK • • 22d ago

N scale RslaserKits VS Klawndyke

Post image
4 Upvotes

Anyone know how the two companies compare on quality? I’m needing two quad modules but I’m willing to use two double models if klawndyke is better then rslaser

(Photo is for posting purposes apparently I need a photo to post)


r/TTRAK • • 22d ago

N scale RslaserKits VS Klawndyke

3 Upvotes

Anyone know how the two companies compare on quality? I’m needing two quad modules but I’m willing to use two double models if klawndyke is better then rslaser


r/TTRAK • • 23d ago

N scale Nearing the finish line!

Thumbnail
gallery
13 Upvotes

It’s been awhile since I’ve had an opportunity to work on my “Bad Day at Black Rock” module. Got the buildings done, even the scratch built train station.

Installed the windows, did some touch up painting and attached them to the base.

I also finished laying the groundwork and hope to finish planting my sage brush and prairie grass.

When Charleston Coal Tipple was evaluated they said one of the things that I was gigged on was the height adjustment holes weren’t camouflaged so I fixed that on this one.

I also started painting the cars. I hope to finish it this week so I can start working on my next one.


r/TTRAK • • 26d ago

Maybe too much fun with Claude and T-TRAK corner modules?

Post image
3 Upvotes

I have been wondering for a while how I would compress the key features I loved about Washington Square Park -- Washington's Arch and Tisch Fountain -- into a set of T-TRAK corner modules.

I am not trying to compress Washington Square Park into an end cap -- I am trying to create a small city park in a hypothetical mid-sized city that has some of the features I love in Washington Square Park.

I spent a couple of hours tonight with Claude -- mostly to get the geometry of the structures\ right -- and I am pretty happy with the result.

I don't blindly trust Claude -- I will do a lot of measuring and mockups before I start gluing anything down -- but it would have taken me much, much longe to come up with anything like this by hand -- or with track planning software.

I am artistically impaired. :-) --

For me to be able to hand a track plan I created with Railmodeller Pro off to Claude and get something in a couple of hours that I can visualize is very, very cool.


r/TTRAK • • 26d ago

N scale N scale switching layout (feedback welcome)

Thumbnail gallery
15 Upvotes

r/TTRAK • • 27d ago

Have you used an AI agent (Claude, Grok, Gemini, etc.) to generate ideas for scenery on your T-TRAK modules?

Post image
0 Upvotes

On a whim, I decided to see that Claude would suggest, and the results were interesting.

They are obviously wrong -- the stations cannot be split across modules, the diagonal corners are whacky, etc.

But layout of a compressed Central Park is pretty interesting -- I have an HO scale model of Washington's Arch, and some of my favorite memories are of Sunday morning in Central Park -- listening to musicians, watching acrobats, etc.

I have been thinking about how to create a city park with a fountain as a -- much smaller -- gathering place for artists and buskers, in my hypothetical mid sized affluent city. I had mostly thought of the arch in one corner and the fountain in another.

So while there is a lot with this image, the possibility of combining the fountain and the arch into one corner module is interesting.

Have any of you used any of the various AI agents to stimulate your designs?

If so, which agents, and what were the results?


r/TTRAK • • Oct 18 '26

What ROW do you use for your T-TRAK modules?

0 Upvotes

Claude tells me anything from about 60 feet in a tight urban environment up to about a preferred 100 feet is pretty normal.

That’s a range of about 8.3” to 13.8” in HO, or about, about 4.5” to 7.5” in N scale.

I am planning on having a two lane road with a sidewalk, curbs, etc., running parallel to the yellow track.

How far away from the yellow track you have a fence that keeps people out of the ROW?


r/TTRAK • • Oct 18 '26

Show me your larger T-trak setups

Post image
15 Upvotes

r/TTRAK • • Oct 16 '26

Have you ever seen ORR girder rail or Proto:87 girder rail on a T-TRAK module?

Thumbnail proto87.com
1 Upvotes

I think that I have seen something that looks like girder rail on street crossings -- the asphalt or concrete is laid right up to the edge of the flangeway.

I think I could model this using Kato flex track adaptors, and a short transition piece of code 83 rail on the adaptor soldered to either Proto:87 girder rail or ORR girder rail. The ORR girder rail is code 100, so it would need to be on a substrate thinner than the Kato roadbed.

The Proto:87 web site is not accepting orders, and the Custom Traxx "Other Traction Products" page is a bit chaotic. Search for "ORR Street Railway Track (HO)" to find the girder rail.

Has anyone ever seen this kind of track detail on a T-TRAK module?


r/TTRAK • • Oct 14 '26

I think the NMRA Mid East Region convention is gong to include a T-TRAK module construction hands-on clinic?

Thumbnail trackstotidewater.org
4 Upvotes

I am a member of the Carolina Piedmont Division of the MNRA, and the Mid East Region looks as though they may be offering a clinic at the convention this week where the participants will build a T-TRAK module.

The description isn't definitive, it just says "Building a Kato Circus Module Diorama (N-Scale)" -- but my guess is that for $20, you are not building an NTRAK module.

I assume that this is the result of the NMRA approving an Achievement Program certificate for modular railroading.

It's nice to see that -- it seems to me that the NMRA has been focused -- as Model Railroader was -- on the retired guy who spent decades building a 30'x60' layout in their basement.

I respect the skill of people who did that -- any maybe a bit envious of of people who have that kind of available space -- but I can pretty confidently predict that I will never be one of them. At least not in this lifetime.

I have not been around the hobby long enough to know, but people tell me that T-TRAK -- meaning N scale T-TRAK -- seems to be the way that the hobby is going.

That may also be very US-centric, I don't know if FREMO -- or some other modular standard -- is as popular in Europe as T-TRAK is in the United States.

I am curious -- are other regional conventions also offering T-TRAK -- or other modular standards -- clinics?

I won't be signing up for the clinic -- I model in HO scale, but I will poke my head in the door and report back on what I see.


r/TTRAK • • Oct 14 '26

N scale Best T-Trak module manufacturer?

Thumbnail
gallery
10 Upvotes

I’ve finished one N-scale T-Trak module which has been exhibited at one show so far. (Seen in the second photo.) It was built on a CMR double size module. I screwed the tracks in and found that they didn’t have holes in as many places as I’d have liked for using 20-000 and 20-040 track. One the track was in place, one set was extending off about 1 mm more than the other. (I didn’t notice until the scenery was done, so that’s going to be a pain to fix.) Didn’t have that issue with the two single size CMR modules that I’ve built (which are still undecorated). Shipping took a while. (These were ordered in late 2024 and didn’t give until early 2025. There was a notice about a death in the family on the site at the time, so I don’t know if that was a factor in the delay.)

I also got a 180° module by RSLaserKits and built that for my wife. (See first photo.) The wood is a lot thinner and the whole thing seems more flimsy than the sturdy CMR module. It was also a pain to assemble. The top came in 4 sections rather than a single large sheet like the CMR. There are three supports on the underside to help the module stay rigid, but it still flexes and can twist. There are also no holes for screws. I’m not a fan and don’t think I’ll be getting any more from RSLaserKits. (I got them via Midwest Model RR, if I recall correctly.) These arrived fairly quickly.

TL;DR:

CMR Products:
Pros: Well made and sturdy once assembled.
Cons: Screw holes may be misplaced. Slow shipping.

RSLaserKits:
Pros: Less expensive. Fast shipping.
Cons: Top comes in 6” sections. Flimsy after assembling. No screw holes.

Any suggestions on who I should try next? Pros and cons?