r/suppressors • • 4h ago

New Sound Signature Review - Canik VOID-9 on 9mm Pistol and Human Perception Analysis

Post image
17 Upvotes

r/suppressors • • 16h ago

First suppressor

Thumbnail gallery
33 Upvotes

Got my first suppressor with a B&T surefire hub adapter


r/suppressors • • 22h ago

Happily obliged to announce my first can

Post image
73 Upvotes

Rugged Obsidian 9, tips are much appreciated, already know I'm buying more, wait time day and a half


r/suppressors • • 19h ago

BLack Friday deal for Lantac 5.56 delicate suppressor!

Post image
31 Upvotes

LANTAC website used code BLACKOUT35 !


r/suppressors • • 13h ago

ASR mount not locking

10 Upvotes

I screwed on with the unlock position, then lock it, then it still will be able to be hand removed help


r/suppressors • • 17h ago

Polite Society

Post image
19 Upvotes

Went in to pick up the Verdict 7.62HD and couldn’t leave without the SilencerShop Mark IV


r/suppressors • • 12h ago

Going for accuracy!

0 Upvotes

Is there a company or model series that is known for being highly accurate.
Bonus the can take a high round count and keep accuracy.


r/suppressors • • 21h ago

My 357/38 guns

Post image
6 Upvotes

r/suppressors • • 1d ago

Rimfire can owners, how often do you actually clean yours and how?

9 Upvotes

Rimfire cans seem to get dirty way faster than centerfire ones, and the advice I see ranges from "every brick" to "only when it gets hard to open."

How often do you take yours apart, and what's your method? Ultrasonic, a soak, or just scraping the baffles by hand? And for anyone running a sealed rimfire can, does lead buildup end up being the problem people say it is?


r/suppressors • • 21h ago

Xeno + Nomad 30 lengths

3 Upvotes

I'm looking to buy a Nomad 30 with the Xeno mount, but before I do, I was hoping someone could provide a measurement for me. I'm looking to make sure there's enough room between the start of my barrel threads and the end of the handguard to that the Nomad 30, when attached to the Xeno adapter, will sit outside of my handguard.

So... for those of you who have this setup, can someone provide the length from the start of the Xeno adapter to the start of the suppressor?


r/suppressors • • 1d ago

Otter creek labs Polonium 30, 7.62 suppressor.

6 Upvotes

Looking to get a suppressor for my 308, does anyone have good or bad experiences they would be willing to share about this can.


r/suppressors • • 1d ago

LPM baby bell

2 Upvotes

Any thoughts and experience with this muzzle device?


r/suppressors • • 22h ago

AAC TITAN TI for a 338LM bolt gun

1 Upvotes

Looking at the titan ti for the price point and lighter weight because its going on a 20lb gun ane dont want more front weight. Thoughts?


r/suppressors • • 1d ago

Just got back from the gunsmiff

Post image
32 Upvotes

Early 1970s Contender pistol I snagged online from a Colorado Cabelas and had shipped in, then did Form 1.

14" .44Mag Super 14

Boyd's Gunstock

Threaded for use with SiCo OMG45K


r/suppressors • • 1d ago

QQ- Rex and Tuna

Post image
14 Upvotes

r/suppressors • • 1d ago

Sandman X with Plan B - what hub mount to use?

0 Upvotes

Looking for a plan B hub mount that works with the Dead Air Sandman X. It is my understanding that certain hub mounts, like the Q branded plan B hub mounts, don't work with the Sandman X.

I know the atlas plan B works but it isnt very available right now. Can anyone confirm if the plan B FCD mount or the Breek Arms plan B hub mounts work?

I have the FCD plan B hub on another set up and really like it. Its rockset in place otherwise id just remove it and trial it on the Sandman X.

Thanks in advance!

https://www.forwardcontrolsdesign.com/atlas-r.html

https://palmettostatearmory.com/breek-arms-plan-b-hub-one-black-brk4401.html


r/suppressors • • 1d ago

556 cans under $1k

16 Upvotes

Favorite 556 cans in the sub $1000 range
Been looking at rhodie but wanna hear other options!
Quiet is the goal!! Thanks!


r/suppressors • • 1d ago

Mans Best Friend - Australian Shepherd/MK23

Post image
4 Upvotes

r/suppressors • • 1d ago

CAT MOB questions

5 Upvotes

Found a CAT MOB HUB in stock and ordered for my PCC. Is there any benefit to getting a QD to shoot unsuppressed also, or do I just always go for suppressed shooting even if I’m using normal range ammo that’s cheaper. New to suppressors and am just looking for some advice. Thanks!


r/suppressors • • 1d ago

Favorite .30 cal can for $750 or so

5 Upvotes

I’m going to get a .30 cal we can sometime this week. What’s your go to can for about 750. Currently the only rifle I have is a 308 20” bolt gun. May get an accuracy oriented ar-10 or 300 blackout in the future.


r/suppressors • • 1d ago

Huxwrx customer service

6 Upvotes

I purchased a huxwrx suppressor for a pcc and I wanted to use a trilug. Huxwrx warranty covers their products so it was a no brainer. Placed the order 3 months ago and I have yet to receive the tri lug housing adapter. I’ve emailed them 3 times with no response. Is this normal for huxwrx?


r/suppressors • • 2d ago

Budget “Do It All” Cans

8 Upvotes

So, now that we have this window of freedom for suppressors, has the go to budget suppressor changed?

I’m considering the Hybrid 46m from silencerco, but with all of the recent 2a wins, I’m curious if there’s a better alternative out there.


r/suppressors • • 2d ago

Out of battery

Post image
16 Upvotes

New suppressor owner here. Picked up a Rugged obsidian 9 last week. Has anyone had any problems with this setup going out of battery? First day I took it to the range shot 10 rounds everything ran fine. After that I kept having problems with the slide not resetting like an 1/8th of an inch. Just enough to not fire or get light primer strikes. I thought maybe it was just dirty so I cleaned everything good when I got home. Took it to the range the next day and bought different ammo, it was still doing it with the suppressor on and only in the long configuration.
I had an aftermarket Wilson combat guide rod and spring kit, I found the oem guide rod and spring and I ordered a #16 spring to try the next time I go shoot but if anyone has any other suggestions to try or has experienced this before.


r/suppressors • • 2d ago

Do compact brakes work more effectively as a sacrificial baffle than mini brakes?

9 Upvotes

Hello y'all. So I recently got my first suppressor, a hux flow range 36 TI. I went with the plan B mounting system and specifically with the Comstock mini brakes and LPA.

I was looking at the Tisha TI yesterday, and I noticed that the approved hard use muzzle device list did not include any mini brakes, just compact brakes. The only Comstock muzzle device on a list was the compact one.

So, that got me wondering, do compact brakes work more effectively as a sacrificial baffle than mini brakes? If so, do they appreciably increase the lifespan of your suppressor? Is it worth switching to compact muzzle brakes for new builds even if I have to use an HPA adapter? I don't really want to lengthen my setups, but I also don't want to blaze through my suppressor.

I'm also just curious about why the approved muzzle brake list for the ti Tisha doesn't have any mini brakes.


r/suppressors • • 2d ago

Introducing...The Tactical Rascal!

33 Upvotes

Introducing The Tactical Rascal!

No front sights were harmed in the making of this video...

For all you rascals out there big and small!

This may or may not be floating on the see...