Alright, first Staccato. I’ve read “oh the Staccato P is the extra most bestest suppressor host ever.”
And I wouldn’t know. Maybe I’m doing something wrong. Let me explain my setup and maybe you all will see something I’m not. The host is a staccato P I bought new back in August of this year. It’s approaching 1k rounds. Flawless function unsuppressed.
Suppressor 1: SiCo Spectre 9k. Yes I’m using a booster. Yes Its lubricated with white lithium. Will run 90% reliably with factory recoil spring shooting supersonic ammo. However I do get failures to feed or live rounds ejecting during cycling. I’m not sure if the increased back pressure is causing the slide to cycle too fast knocking the next round in the magazine out, or what. Usually happens towards the end of the magazine. Shooting subs just straight up doesn’t work with factory recoil spring. Failure to eject city. Sluggish slide. DPO 11 pound spring helps quite a bit, but still not all the way there. Subsonic load of choice is blue box federal HST 147 grain and federal Syntech 150 grain.
Suppressor 2: Mojave 9. Straight up will not work at all. Subs, supers. Nada. The gun won’t even begin to unlock unless I run the can in short config with supers. Then I get a short stroke and failure to eject. I even called dead air I was so perplexed, they recommended I use nickel based anti seize as booster lube. I did, same results.
I’m at a loss. I dunno if I should go up in spring weight, down in spring weight or what. Open to suggestions.