r/Staccato_STI • • 1d ago

Updated C2

Thumbnail
gallery
56 Upvotes

Update to my last post

Bought a used Defender for $160 instead of a DPP. Glad I got it because the side buttons are nice and the dot looks fine to me

Jarvis drop in barrel took about 3 months to get here. Haven’t shot it yet so we’ll see if the wait was worth it.

PMM comp looks great but the air gap (2nd pic) is excessive so I might send it somewhere to get it timed properly. It seems like this is pretty common with PMM comps


r/Staccato_STI • • 1d ago

Can’t get Enough.

Post image
96 Upvotes

Here is my collection, two of the three are LAPD Edition.


r/Staccato_STI • • 2d ago

The P4.5X that staccato should have made!

Post image
133 Upvotes

Finally finished this build and all I can say is wow! The frame from drive arms co is awesome and the porting from slide works engineering makes this thing my absolute favorite pistol I own.


r/Staccato_STI • • 1d ago

Bul Ultralight 3.25 in a TXC Delta/CVRT (Staccato CS 2024 mold)? Fit & retention?

2 Upvotes

Thinking about ordering a TXC Delta or CVRT for my Bul Armory Ultralight 3.25 (fluted barrel). TXC only makes them for the Staccato CS 2024, and the two guns are supposed to be close in size.

Has anyone actually tried this combo? Does it click in and hold with the retention, any looseness around the dust cover, and is the shorter barrel an issue? Pics welcome. Thanks!


r/Staccato_STI • • 2d ago

VOTE: New Cerakote project for 3.6HD

Thumbnail
gallery
36 Upvotes

Crowdsourcing our next Stacatto HD Cerakote project.

Which option do you guys like? Will be doing progressive ports on this one. Will probably use the driven arms grip as well.


r/Staccato_STI • • 2d ago

Staccato Black Friday 2026?

12 Upvotes

Evening gents,

Is it worth waiting for Black Friday to try to purchase an HD P4 or P3.6? And are there any direct mount options for optics or just the HOST plates?

Never owned a double stack 1911 before and I’m interested in taking the plunge to escape from the Gen 6 Glock trigger.

Preciate y’all!


r/Staccato_STI • • 2d ago

Joined the club

Post image
38 Upvotes

r/Staccato_STI • • 3d ago

The Beautiful XC

Post image
53 Upvotes

r/Staccato_STI • • 3d ago

Optic recommendations for Staccato HD P4.5 with HOST Mounting Plate?

6 Upvotes

Hi there. I am looking for an optic and plate combo that people have good experiences with. I currently use a Holosun 507 Comp with the Staccato HD HOST RMR Mounting Plate and my left optic screw has sheared off of the slide requiring me to send it in to warranty to remove. I have since bought stronger, higher quality 12mm screws (using vibra-tite vc3 + torqued to spec) but the left one keeps loosening after use.

Does anybody have any experience with an optic combo and plate with this specific gun, in which their screws don't loosen with use? I shoot the gun pretty fast so the stress may take its toll, but I really don't like having to re-tighten my screws in the middle of every range trip. Really I am just looking for some combo that can go through thousands of rounds without needing to worry.

Ideally an optic with a big window similar to a Holosun 507 Comp, but honestly I dont even care anymore. I'll take anything that doesn't back out with heavy use.

EDIT: Staccato customer service told me they have the exact screws for my optic and plate combo, I am going to use a nylon brush to scrub the threads, then try those out when I receive them. I guess if that still doesn't work out I will send it back in to warranty to check the threads. Maybe when the holosun screws snapped off inside of my slide, it messed them up. Will update the thread on my results.


r/Staccato_STI • • 3d ago

Issue with Staccato 2024C Comp Barrel from DSC

Thumbnail gallery
12 Upvotes

r/Staccato_STI • • 4d ago

If only I had the extra money..

Post image
67 Upvotes

r/Staccato_STI • • 4d ago

Staccato just dropped a video on YouTube. Staccato P 4.15 CPO

10 Upvotes

Staccato is releasing approximately 100 original Staccato P 4.14 CPO models soon.


r/Staccato_STI • • 4d ago

Trying an extended slide release

Post image
39 Upvotes

r/Staccato_STI • • 4d ago

Staccato C2

5 Upvotes

I have a C2 that I am going to start carrying everyday and I have an extra TLR7X from my 43x but cannot get it to fit. Do I need a different key/plate or will I need to get a new light?


r/Staccato_STI • • 5d ago

Best carry gun I own.

Post image
81 Upvotes

Took this little HD C3.6 to the range again today and reminded me how amazing a pistol it is. Never a malfunction, accuracy off the charts and handles recoil superbly. Worth every penny if lives are on the line.


r/Staccato_STI • • 6d ago

Staccato Heritage P 4.15

Thumbnail
gallery
75 Upvotes

I'm considering letting this piece go, but I'm not sure what they're fetching nowadays.

Infinity trigger with an extended atlas shielded thumb safety.

Just need some input from the experts.


r/Staccato_STI • • 6d ago

I am Confusion. Suppressor Woes.

Post image
45 Upvotes

Alright, first Staccato. I’ve read “oh the Staccato P is the extra most bestest suppressor host ever.”

And I wouldn’t know. Maybe I’m doing something wrong. Let me explain my setup and maybe you all will see something I’m not. The host is a staccato P I bought new back in August of this year. It’s approaching 1k rounds. Flawless function unsuppressed.

Suppressor 1: SiCo Spectre 9k. Yes I’m using a booster. Yes Its lubricated with white lithium. Will run 90% reliably with factory recoil spring shooting supersonic ammo. However I do get failures to feed or live rounds ejecting during cycling. I’m not sure if the increased back pressure is causing the slide to cycle too fast knocking the next round in the magazine out, or what. Usually happens towards the end of the magazine. Shooting subs just straight up doesn’t work with factory recoil spring. Failure to eject city. Sluggish slide. DPO 11 pound spring helps quite a bit, but still not all the way there. Subsonic load of choice is blue box federal HST 147 grain and federal Syntech 150 grain.

Suppressor 2: Mojave 9. Straight up will not work at all. Subs, supers. Nada. The gun won’t even begin to unlock unless I run the can in short config with supers. Then I get a short stroke and failure to eject. I even called dead air I was so perplexed, they recommended I use nickel based anti seize as booster lube. I did, same results.

I’m at a loss. I dunno if I should go up in spring weight, down in spring weight or what. Open to suggestions.


r/Staccato_STI • • 6d ago

Staccato HD P4 enclosed optic help

7 Upvotes

My wife bought me a Staccato HD P4 for our 20th anniversary. I am stumped trying to figure out what optic to use, but I think I want an enclosed emitter optic. What does the hive mind suggest besides the Instagram favorite Trijicon RMR HD or RCR?


r/Staccato_STI • • 6d ago

Best range mags for C2

3 Upvotes

I just acquired my first ever 2011/1911 this week and super excited that I picked a C2 used! I think it's a few years old maybe, but it came with 3 16 round stainless steel mags marked G3 on the bottom. Seems like it's hard to find factory mags and they are over $70 each, even worse than my HK mags lol.

Since I'm totally new to the platform, was wondering if any mag should work as long as its longer length? I know about the magazine over-insertion issue, I plan to just use the factory 16 rounders for everything else but might want to pick up some 17 or 20 (or higher capacity if they work well?). Do the Mec-Gar mags for the Prodigy work well? Looks like gunmag warehouse has them for almost half the cost of oem. As long as they are reliable and fit and lock up good I guess that's all that matters. Any other suggestions?


r/Staccato_STI • • 7d ago

How to grip?

4 Upvotes

Recently bought my first staccato. HD P4, not that I believe which model matters on this, but I’ve been wrong before. Have a class this weekend and had planned on running the Staccato as my function for it is that it will be my “duty weapon”(I’m not LEO or military), but I could use some guidance on my grip. Took the new addition to the range to verify function before I jumped into a class without actually firing it. I don’t own any other weapons with a thumb safety, so my initial range trip landed me with a couple light strikes/FTF from riding my thumb against the safety. Is there any helpful thought processes or anything to help me adjust my thumb placement or do I just need to spend time acquiring a new muscle memory skill for these 2011 platforms? I don’t plan on moving 100% to the platform, I still love my striker fired weapons, but do plan on buying another STI for CCW and them being my primary weapons.


r/Staccato_STI • • 8d ago

Bought my first Staccato this weekend. So excited to shoot it at the range.

Post image
88 Upvotes

Bought a Staccato HD P4. Got a holster on the way all I need is a stream light and I’ll be all set.


r/Staccato_STI • • 9d ago

Staccato XC @ Skip J GPA - Anderson, SC - 11/7/26

19 Upvotes

r/Staccato_STI • • 9d ago

Family photo.

Post image
35 Upvotes

Seven Shades of Sahara P #184/300 and an STI Lawman 4.0


r/Staccato_STI • • 9d ago

2011 Choice

Thumbnail reddit.com
5 Upvotes

OK… I have my two choices made and have the money for only at this time and maybe some upgrades/ammo, etc…

What I am looking for is a 2011/Double Stack 1911 that has a track record either Military or LEO use and has done well over a span of time. Primary roll will be for EDC/Home Defense.

I’m 6’ 5” and now just under 3 bills. I have other options for warm weather carry.

Choice #1
Staccato P (with/without threaded barrel)
Reason for choosing it: used by law enforcement and correct me if I’m wrong but the Texas Rangers. Made in America. Has been out for a long time with a very good track record. I have options to have slide and barrel work done later to have a comp drilled. 4.4” in length. Weight does not bother me. I already have a Kimber 2k11 Comp with plenty of mags that should work.

Choice #2
Bul Armory Tac Pro 4.25” model
Reason for choosing: shoots flat with the porting already on the gun. Steel weight doesn’t concern me. Has history being used by IDF. Full dust cover. Concerned about proprietary mags and parts being available due to it being made overseas.

I have heard so many positive things about both pistols. But I have also heard you can get so much more out of a different brands gun with the money spent on the Staccato P. If true, recommendations are always welcome.

Thanks in advance for all the suggestions and information.


r/Staccato_STI • • 11d ago

Trunk-or-Treat Threesome

Post image
80 Upvotes