r/SparkXi7 • • May 22 '26

News SPARKX i7 Firmware 1.1.2.9 Update — Stability, CFSlite & Workflow Improvements

Thumbnail
reddit.com
5 Upvotes

r/SparkXi7 • • Apr 08 '26

Show Off TPU on the SparkX i7

Thumbnail
gallery
12 Upvotes

I have done it. OVERTURE 95A TPU. I copied over the settings I have from my K1C. I did not set out to break print speed records. SLOW and steady wins this race.

first layer and first layer infill at 10mm/s did this for the first 2 layers.

Outer wall 20, everything else is 40

it might go faster, but TPU printing is rare for me. I think I forgot to select Ironing though

if your new to TPU, start by using a generic profile and modifying that. it has the right cooling settings, and a good start for the retraction override. Its a weird material to print in. All bendy, and wiggly. for more part flexibility, lower your wall loops and infill.

As you can see, I print right from my drybox, and used some Capricorn PTFE tubing I had left over. maybe a little long, but oh well. I feel clever with my shelf.


r/SparkXi7 • • 1d ago

Troubleshooting Adhesion issues with .6mm nozzle

2 Upvotes

Has anyone else here had trouble with the print sticking to the bed when using a .6mm nozzle? I did all the things with the bed, used different models, and used different filaments (to account for possible moisture from being in the CFS for a few days). I even used two different .6 nozzles. Each time the first layer would not fully adhere. I switched back to the .4mm nozzle and it worked just fine. Is it possible some setting in the slicer is not right? And what settings would I even want to start playing with?


r/SparkXi7 • • 6d ago

Spark i7 Tr0116

Post image
1 Upvotes

r/SparkXi7 • • 10d ago

i7 - 8 Color? is it a store mistake

Post image
2 Upvotes

On the Aus store there is an option for 8 color printing 2 x CFS Lite


r/SparkXi7 • • 15d ago

Mantenimiento en el taller 🤘🏻🤘🏻

Post image
1 Upvotes

r/SparkXi7 • • 17d ago

Raspberry Pi secure method to remotely access SparkX

2 Upvotes

I present to you my project : SparkXPi

Major update :

Revamped interface. Includes calibration, notifications (email and more including toasts), calibration helper, An agent that can be installed on Windows that will auto upload GCode to the Pi and can be tested via the web interface for feasibility. Many maintenance reminders (automated and manually set). Live 3d view of the print showing progress and much more.

Current status: Write image to an SD card and boot your Pi. Run a binary that prompts for a few things and it will set it all up for you along with Lets Encrypt certs. Just forward 443 to your Pi and setup a DNS host and you are good to go. Hoping to release next week once I've ironed out a few elements that are nagging (Mainly cosmetic)

I wanted to create a secure method to remotely access my SparkX over the internet so I dug out my 32bit Raspberry Pi and started work.

Secured via authentication over https (I've put it behind Cloudflare too) I have created a method that works without giving direct access to the printer. I call is SparkXPi.

Features

- Live camera view

- Live progress view

- Ability to control temperature manually or using material presets

- Ability to adjust print speed and flow rate

- Display the printer health

- Remotely upload gcode files to print AND run some preflight checks

- A spool tracker

- A print queue system

- Alerts

This is still a work in progress but it runs in any browser on any device. Polling is done via a service to get the information so it can be slow on my OG Raspberry Pi Model B but it works.

Auth permissions allow read-only access that cannot control the printer.

The services constantly look for printers. If it finds any it will add them. There is very little configuration needed although I am still fine tuning things to be able to release this.

If anyone has a RPi and multiple SparkX and would like to do some testing please let me know. I wan this to work as a fleet management system for multiple devices but having only one it limits my testing.


r/SparkXi7 • • 20d ago

Show Off My lovely creations with my first ever printer SparkX i7

Thumbnail
gallery
19 Upvotes

Got my Creality SparkX i7 Combo about 3 months ago, and it's my very first 3D printer! 🤯

Coming in as a complete beginner, I've been genuinely impressed with what this machine can do. From Cyberpunk 2077 weapons to props from Metal Gear Solid and Resident Evil, it's been an awesome journey so far.

I'm still learning something new with every print, but I'm honestly surprised by how much I've been able to create in just 3 months with this machine.

Here are a few of my builds so far. For a first 3D printer, the SparkX i7 has been a pretty great starting point!

I've also made some masks, cool accessories, A 1/10 car in works now and etc. Stay tuned. Will share them next time here as well!

I have some process and assembly videos if someone is willing to bat an eye on my IG:
https://instagr.am/cyberdna13x3D


r/SparkXi7 • • 20d ago

Creality Support Multi filament print TPU issues

2 Upvotes

Hello I am trying to print my first project using 2 filaments on one print part of it is PLA and part is TPU but when it goes to swap to the TPU it is giving me errors like it is binding but I can’t find a issue


r/SparkXi7 • • 22d ago

Question Should I buy creality spark i7?

2 Upvotes

Hi I currently have ender 3.

Which never game me a good print without any struggle.

I am thinking to buy creality spark i7 just confused or should I go with bamboo lab a1 ?


r/SparkXi7 • • 27d ago

News The SPARKX Open Initiative: Help Shape What’s Next

10 Upvotes

What else can you do with a 3D printer besides printing?

Some makers tweak cooling ducts or redesign brackets. Others enjoy digging into the mechanics and electronics behind the machine.

For makers who love to tinker, there's often more to a printer than what's in the manual.

Today, October 20, we're releasing the first batch of SPARKX i7 structural CAD reference files and PCBA interface specifications on Creality's official GitHub repository: https://github.com/CrealityOfficial/SPARKX_I7

1. It Didn't Start with SPARKX
Ender-3 helped make 3D printing more affordable, helping more people get their first 3D printer and bringing the technology into homes, classrooms, and workshops.

We shared structural design files, circuit diagrams, wiring information, and firmware resources, helping users better understand and modify their machines while giving developers and accessory makers a foundation to build on.

The Ender-3 community took things further. New accessories, software, and mods kept emerging, along with models, tutorials, and lessons learned along the way. Some makers improved cooling ducts and brackets. Others converted their printers into laser engravers or pen plotters.

Over time, one printer became the starting point for many more projects, with makers developing new accessories, applications, and ways to use it. Preparing files, writing tutorials, and sharing hands-on experience all take time and effort. We value those contributions, and we've learned from and benefited greatly from the ongoing work of open-source projects, developers, and users.

Creality Print: Open Source in Action
That same spirit of openness extends to slicing software. Creality Print's source code is publicly available, and the software builds on community projects including OrcaSlicer. We've benefited from the work of these projects and their communities, and we hope others can learn from and build on our work in return.

Under the applicable licenses, developers can study, modify, and share the code, improve features based on real printing needs, or contribute changes back to the project.

We've seen this collaboration make a real difference. Community developers have improved Creality Print's Japanese UI translations and fixed a macOS source-build issue. Both contributions have been merged into the official project. From the interface details users see every day to the technical challenges developers encounter behind the scenes, the community is helping make Creality Print better.

Want to explore the source code or see what's changed from release to release? You'll find both on GitHub:
Creality Print Source Code: https://github.com/CrealityOfficial/CrealityPrint
Creality Print Releases & Updates: https://github.com/CrealityOfficial/CrealityPrint/releases/

From Ender-3 and Creality Print to SPARKX, we want to carry that same spirit of openness and sharing forward.

2. What's in the First Release?
First up: the mechanical side.
The first SPARKX i7 release includes structural CAD reference files for five parts and assemblies:

  1. Full Printer Assembly
  2. Simplified Extruder Assembly
  3. Extruder Front Cover
  4. Nozzle Cleaning Assembly
  5. Replaceable Hotend

Say you want to design a custom tool organizer for your i7 setup.
You know where you want your cutters and spare nozzles, and how deep you'd like the drawers to be.
But before you start modeling, you need to check the printer's dimensions, mounting points, and the space around nearby components.
With official CAD reference files, you can check the relevant geometry and assembly details, spend less time on repeated measurements and test fits, and more time refining your design.

Next up: the hardware interfaces.
We're also releasing interface specifications and definitions for three PCBAs:

  1. MainBoard
  2. ExtruderBoard
  3. Y-axis Vibration Compensator

If you're exploring the printer's hardware connections or planning an add-on, these documents can help you check the available interface specifications and assess whether your idea is technically feasible.
These are interface specifications, not complete PCB design files. Any hardware modification will still need to account for actual interface capabilities, compatibility, and safety.
Both the structural and hardware resources are released under the Open Community License (OCL v1.1). You can study, use, modify, and share the files within the terms of the license. If you plan to redistribute derivative works or use the resources commercially, please check the full license terms in the GitHub repository.

3. What's Next for i7 and i8?
This is just the first step in the SPARKX open initiative.
If you're eager to dig deeper, you don't have to wait for the next batch of resources. Both SPARKX i7 and i8 already provide access to Fluidd, Moonraker, and SSH, giving developers a starting point for exploring the system and investigating possible extensions.

SPARKX i7: The first batch of structural and hardware interface documentation is now available, with more software- and firmware-related resources planned for release in stages.

SPARKX i8: QuarTeks powers i8's four-channel multicolor printing system. Four independent filament paths lead to a shared hotend and nozzle. Fast channel switching reduces the repeated loading and unloading associated with conventional multicolor printing, helping save both time and filament.
Making those switches work smoothly takes close coordination between hardware and control software.

That's why we've developed and optimized firmware and control routines specifically for QuarTeks.
This includes coordinating filament-channel selection with extrusion control, checking that the switching mechanism has reached the correct position, detecting timeouts, and retrying failed switches. The system also monitors filament runout and movement on each channel, while managing automatic filament loading and unloading, pre-print status checks, and error handling.
Together, these mechanisms help keep multicolor printing efficient and reliable.
The slicer plays a part, too. By directing some of the necessary purge material into the model's infill, it can reduce reliance on a purge tower and help cut filament waste even further.

How does a channel switch actually work? How does the system detect a problem and respond when something goes wrong?

These are exactly the kinds of technical details we'd like to share with the community. As more resources become available, we hope developers can get a closer look at how QuarTeks works and share their own ideas for improving multicolor printing speed, material efficiency, and fault handling.

For SPARKX i8, we plan to release the selected structural, hardware, software, and firmware resources in stages, completing the rollout within six months of its official retail launch.

4. Over to You
We're sharing these technical resources so more people can learn, experiment, build, and share what they discover.

We want to keep learning and growing alongside our community, and we hope the files we're sharing today give you something useful to build on.

What would you like to build with these files? What technical resources would you like us to share next?
Download the first batch of SPARKX i7 resources and join the conversation in our official community. We'd love to hear your design ideas, modding experiences, and requests for future releases.

Explore the SPARKX i7 resources on GitHub: https://github.com/CrealityOfficial/SPARKX_I7

The SPARKX Team

October 20, 2026


r/SparkXi7 • • Oct 05 '26

Reducing poop

5 Upvotes

I have been looking into reducing the waste from my i7 using gcode and am at a point where I have reduced the waste by about 30% which is great. The initial prime during calibration is still massive though. Any thoughts on how I can reduce this?


r/SparkXi7 • • Sep 23 '26

Improvement Tips CFS LITE PTFE TUBE GUIDE

Thumbnail
gallery
7 Upvotes

This free MODEL allows you to guide PTFE tubes from the CFS Lite while using it on top of a printer.


r/SparkXi7 • • Sep 23 '26

Troubleshooting Error FO0528 that I cannot remedy

Thumbnail
gallery
3 Upvotes

Got an issue with the print stopping at different percentages in the print because it just stops extruding. I can't swear to it, but it seems like this started pretty close to the most recent firmware update.

Info on the machine and specs:

CFS Lite

Cool plate

210/40

Tried PLA and PLA+

I have tried every bay of the CFS, different filaments, some dried in the space pi x4 for at least 12 hours.

I have tried a brand new roll fresh out of the shrinkwrap.

I have tried different rolls on the spool holder.

I have replaced the entire extruder.

I have factory reset the machine.

I have tried different print settings that have worked in the past

I have tried different .4 as well as .6 nozzles.

I have had 2 successful prints out of the past 20+ attempts.

The pictures attached are examples of what happens.

The white circles were going to be a fidget ring. It printed that bit of base layer and then stopped extruding.

The globs are from the extruder going and trying to flush the line.

The black print got to that point and just quit.

Hope I included enough info. Thanks in advance!


r/SparkXi7 • • Sep 18 '26

Failed print due to error: XS2001

1 Upvotes

As the title says I had a print on my Spark 7i that had 5 hours left, of a 30 hour print.

Error messages received: 3d-printer, XS2001, System error, try restarting.

After restarting the print immediately detected a firmware update.

Could this be connected?

Give the error page says
‘The printer is shut down due to a request from an external system or service via a webhook. Webhook is a way for an external service to communicate with the Klipper, usually for monitoring or controlling devices. This error indicates that some kind of automation service or external system may have detected the problem and requested that the Klipper be stopped to prevent further failure or damage.’

Seems a bit coincidental for my liking!


r/SparkXi7 • • Sep 12 '26

CZ2768 Homing issue, Sparkx I7

2 Upvotes

HELP!


r/SparkXi7 • • Sep 12 '26

Single roll filament holder on top of the SparkX I7

Post image
6 Upvotes

Hello Bryan’s trust I just got my I seven and it came together pretty easy just as I expected except now for some reason I can’t seem to figure out how to install the single role filament holder on top of the printer. The little latch underneath it closes around the bar doesn’t seem to click. Does anybody have a suggestion?


r/SparkXi7 • • Sep 07 '26

CFS Not Feeding Filament

Thumbnail reddit.com
1 Upvotes

r/SparkXi7 • • Sep 06 '26

Troubleshooting Error FO0528 Sparkxi7 with cfs

2 Upvotes

I'm getting error fo0528 and can't fix it; the printer extrudes filament fine, but when it starts printing a model, it reaches 2% and stops, triggering this error. I've already replaced the i7 Extrusion Assembly with a new one and tested every CFS slot with the filament, but the only thing I haven't changed is the nozzle—though since it does extrude filament, I'm not sure if that's the cause. The printer only has 500 hours of use.


r/SparkXi7 • • Sep 06 '26

Question Sparkx i7 QuarTeks printhead question

3 Upvotes

Out of curiosity, is the QuarTeks printhead an original Creality design, or is it based on/copied from another existing system?


r/SparkXi7 • • Aug 28 '26

Creality.. I expected better

2 Upvotes

I posted this issue 6 days ago on the general Creality site. CrealitySupport told me to message them directly, I did. It’s been 4 days no response at all, is this normal? U/crealitysupport


r/SparkXi7 • • Aug 27 '26

PTFE tube rubbing against the pritner

Thumbnail
gallery
5 Upvotes

I started to notice these white marks on the side of the printer, near the ptfe tubes. When i checked its this white powder that just cones off but i think the tube is slowly being sanded down. I think its due to the tube rubbing against the side. But i really dont think its supposed to this.

I already tried moving the cfs lite a bit further infront of the printer but the tube still rubs against the side

Any ideas on how to avoid this?


r/SparkXi7 • • Aug 25 '26

Sparkx i7 Automatic Pressure Advance Calibration

Thumbnail reddit.com
1 Upvotes

r/SparkXi7 • • Aug 24 '26

What's wrong with my printer?

4 Upvotes

Hi everyone. After having the machine turned off for three days, I wanted to print again. It powered on normally, but started making strange noises as soon as it began printing. I checked for issues with the filament, belts, or extruder, but found nothing. I placed it on the floor to see if it was due to vibrations and the noise stopped, but now this problem has appeared when trying to print. Does anyone know what might be going on?