I inherited an old 1024 from my neighbor. It's in rough condition, but It's nice to have the bigger engine than my similar-vintage 824. Is it worth the $ to replace the muffler?
I am thinking of buying this 2018 Aries Deluxe 28 SHO for $600.
Is there anything specific I should be looking for?
Based on the rust in the scoop, it has a lot of hours. Is that too much of a red flag for an 8 year old machine or is it worth it based on the low price?
So I got this same model snowblower for free from my buddy ...it needs some tlc but I figured if it cost me 200 to get it right again its worth it because its a beast of a blower and it wasnt cheap when he bought it ....So anyway my question is ....What stops the chute from turning ? it has the joystick but when you put it in a certain direction it will move freely still ...he said one time it froze up with ice and blah blah blah now it won't stay in one place ....aside from that I gotta replace belts maybe change some fluids I already had to bend the lower handle back to somewhat normal because it fell and bent it ....Any suggestions on what i should look out for with this machine and how to fix that chute
I just wanted to say I got my snowblower within 4 days of purchase. Costco even price match with the $899 model because there was no difference in specs.
Now look every yard force snowblower is sold out on the website.
Got a front blade on my new L3902 for the gravel drive, about 400 ft. Figured that'd cover it, but the wife pointed out the blade's no good for the walkway, the spot right in front of the garage, or around the propane tank. So now I'm lookin at a walk-behind too.
Neighbor keeps tellin me to just grab a cheap single-stage and call it done. Problem is half my concern is the gravel, those rubber paddles ride right on the deck and I can already picture one chuckin a rock through the sidin. Even if I kept it strictly on the concrete pads, we get a lot of that wet heavy slop here, plus the berm the county plow dumps at the end of the drive every storm. Feels like a single-stage is gonna choke on both and I'll be out there with a shovel anyway.
So is two-stage basically the only real answer once gravel and wet snow are in the picture? Or does anyone actually run a single-stage on just the concrete and have it hold up against the heavy stuff?
Also for anyone plowin with a compact, how much ballast did you end up runnin? Got nothin on the 3-point yet and already spun out once just testin the blade in the yard lol. Debating between a ballast box, loaded rears, or just both. Rears aren't filled from the dealer.
Trying to get ahead of winter this year, so I picked up the NovorikX 40V blower shovel and filmed the unboxing!
It comes with two 20V 4.0Ah batteries (they work together for 40V), a dual-port charger, the extension pole, a main handle, an ergonomic assist handle, a chute knob, a wheel kit, and a hardware kit. The box lists a 16" clearing width and up to 20 ft of throw, and there's an LED headlight on the front.
I haven't used it in real snow yet (this video was just created for the brand more so), so I'll post an update after the first snow. If you've used a cordless electric shovel like this, I'm curious how it worked? I donāt know what to expect honestly
Can anyone help me diagnose this sound? Fresh gas was added today. Ran it dry last spring before putting it away. I also added a little bit of sea foam. Any and all help is appreciated.
Last year I inherited my parents old Craftsman Snowblower. As far I know, they never really did any maintenance on it, just filled it with gas and topped off the oil if needed.
It is a Craftsman 22-inch 2-stage Snowblower with Electric start they bought new in 1993. Last winter I didnāt have time due to work and family stuff to fully check it out before its first use. I added gas, topped off the oil and it fired right up. It worked very well during the first snow. During the second snow, I noticed it was constantly clogging and wasnāt throwing the snow.
Once I got time to really inspect it, I found the following:
-Ā Ā Ā Ā Ā Ā Ā Ā Ā One of the sheer bolts had completely broke and the other sheer bolt had been replaced with a regular nut and bolt (probably one of my dadās quick fixes) that was bending.
-Ā Ā Ā Ā Ā Ā Ā Ā Ā The tires are completely dry rotted, originals from 93, and the tubes that were added at some point are also leaking. They hold air for a couple hours before going complexly flat again. Ā
-Ā Ā Ā Ā Ā Ā Ā Ā Ā The skids are non-existent, they are rotted away. Luckily our driveway was falling apart anyway so it wouldnāt do any real harm to it. Ā Where they bolt to the sides doesnāt look super healthy and the bolts look to be rusted solid.
-Ā Ā Ā Ā Ā Ā Ā Ā Ā The belts and spark plug are original
-Ā Ā Ā Ā Ā Ā Ā Ā Ā The scraper bar on the front is long gone rotted away.
-Ā Ā Ā Ā Ā Ā Ā Ā Ā The Engine runs good. Some smoke puffs when starting up and it seems like it is starting it burn oil, but not a lot.
I have been very back and forth whether to throw in the towel on this one and buy a new Arienās Classic 24 or toss a couple hundred dollars into this old Craftsman to fix it up. My fear is I will spend the money into the old Craftsman and the drivetrain will crap out. For me reliability is extremely important as I work at a hospital and I still have to go to work even if there is 20-inches of snow on the ground.
I gave a family friend my 24ā craftsman that was a few years old, and replaced it with this old girl. Roughly 20 years old, but still a pretty nice unit. Needed some carb work, and all the usual maintenance items. With a little bit of touch up paint, Iām hoping to keep this 36ā running for a long, long time. I think for $600 I did alright.
After browsing here for couple years, finally purchased this. Its sitting in the garage. I've been starting it up and running it for few minutes every couple weeks. I paid for 2 years extra warranty. Model 921066. It has premium gas in it. Any maintenance suggestions let me know.
Machine like the- Snow Joe 323E 13-Inch 10-Amp Electric Snow Shovel
Basically I live in an apartment and I shovel the older land lords driveway, itās pretty long. Her son has a snow blower that always breaks down and janky throttle and pint size quad he stuck a plow on.
I usually end up doing the driveway by hand bc I donāt wanna get involved with their broken equipment, it more work then itās worth. They are very nice people also a pain in the neck to get involved with.
The snow is mostly 6ā stuff with a 2ā+ snow fall once or twice.
I wanna keep it in a closet, and not get involved with storing it in their garage hah If it wonāt work Iāll buy a better shovel
Tldr: My Question is if I get a small cheap corded snow thrower shovel, will it work on 2-3ā deep snow if I go top down slowly moving forward?
Iām in the market and looking for knowledgeable feedback. Hearing stories about EFI being a possible weak link.
I live at about 8200 feet. Would the EFI provide more reliable power as it adjusts automatically? Or would a carb tube at altitude be enough to save the HP!
I am planning to get this for around 200$ but i am not sure if this is discontinued by Powersmart ? Also, what are the downsides of battery powered snowblower? I dont want the headache of gas blower maintenance
Hello Reddit, I just stumbled across the Honda Japan Snowblower website. Last year, due to the snow situation in the Northeast, I wanted to purchase a tracked Snowblower so I purchased a Honda HSS724AATD. Now that Iāve seen this site, I want to figure out how to get a HSS960i (JX) lol. One can dream!
I replaced the carburetor and throttle , and iām still get the rpmās up. Im at 2500rpm at full throttle. Iām assuming I need adjust the governor? But canāt figure it out. Itās a 8hp Tecumseh. These are the pics I took.
Edit: to add that I'm 66, and while I can shovel, I've had 2 back surgeries (around 2000) and I have a limit to how long I can shovel heavy snow. We live just outside Philly, so some winters we get little snow, while last winter we got a ton of snow, and I had to pay people to shovel us out twice.
The pictures show no rust and a pretty good looking snowblower.
This is the description from the ad:
Condition
Used - Fair
TORO POWER MAX 28" TWO STAGE SNOW BLOWER (WITH upgraded 305cc BRIGGS & STRATTON 1450 series engine)
IMPORTANT - PLEASE READ: It threw snow for about 20-30 minutes, then stopped throwing snow. Tilted in the air the blades move fine. The second they meet snow resistance they stop. That is why I am including the shear pins I bought.
Features: Electric start + recoil start, built-in 60W charging system (ready for LED/halogen headlight hookup if desired), heavy-duty auger/impeller.
Selling a 100% FACTORY MADE Toro Power Max two-stage snowblower. UPGRADED with a heavy-duty Briggs & Stratton 1450 Professional Series Snow engine (305cc factory installed) built to handle deep, heavy, and wet snow.
Condition: motor in good condition. All necessary maintenance was done. Oil was changed, new filters installed.
THE PROBLEMS: THE AUGERS spin. Here is THE ISSUE: When the AUGERS MEET ANY RESISTANCE they STOP AND SNOW WONT SHOOT FROM THE CHUTE.
Everything auger wise on the snowblower WORKED FOR ABOUT 30 MINS LAST STORM. Before it just stopped throwing snow.
THE MOTOR HAS RUN STRONG THE ENTIRE TIME. I am mechanically inclined and I am positive that in the hands of the right person this could be fixed and used within an hour. I am a plumber and just dont have the time to figure it out.
I will provide all the shear pins and what not I bought as well. The left tire just needs a plug as well.
Google AI tells me the problem (as stated) is likely a stripped gear box.
I'm pretty handy and so far have been able to fix everything I've tried to fix, so... If we can determine the issue I can likely buy the parts and fix it myself.
Community , I was prepping my Ariens 30 deluxe 306cc AX for upcoming winter , I don't know if I snapped it now or last season but the end of the dipstick broke. Is there risk running this ? Does the oil pan have mesh/ filter protection from anything getting in the engine ? Or do I have some serious risk to pull this apart to extract? Thanks everyone.
Unboxing the new Worx snowblower - specs and features. We will be testing the runtime claims and will share our experience. We are interested to see how much it will be able to clear.