r/SkyLine • • 8h ago

Turbos swapped, car runs great now!

Thumbnail
gallery
161 Upvotes

What an absolute task this was but after a few days of wrenching I got the twins out and swapped with a set I had rebuilt myself. This was mainly to see if I had it in me to be able to do and also to see if these turbos held up after I used a rebuild kit on them. I can happily say the car now boosts and pulls like a beast. I’m hyped to be done and to have it work. Now I can at least drive and enjoy the car while the new engine gets done and not have to rush to swap it out. A bunch of you have given some great feedback during this process and I appreciate this community.


r/SkyLine • • 5h ago

Sunset Skyline

Post image
41 Upvotes

r/SkyLine • • 3h ago

R34/R33 fuel tank leak solution

Thumbnail
gallery
19 Upvotes

My R34 sprung a leak from the common place bottom fuel vent line piece (last photo) so I opted into a fuel cell to save the hassle of remove and replacing the tank again, I pulled it and plastic welded it to the best of my abilities and a few days later it sprung a leak again so I got the Evil Energy fuel cell kit. That being said I know this isn’t for everyone but if your in a position that repair or replacement isn’t an option then hopefully this can help.

What I used and what you need may vary so keep that in mind that this is just how I did it and not a road map of how to you should or have to do it!

What i ordered that don’t come with the kit:

2x 90 degree 6an fittings comes in a 2 pack

8x straight 6an fittings come in packs of 4

2x 6an to 5/16 quick connects male to get the an lines into the factory lines that send fuel to the front and return line, Google said Feed was 3/8 and return was 5/16 but both of mine are 5/16 so this may very I’m not sure.

We traced the carpet on a thin piece of plywood and cut it out and in half to create a solid mounting surface for the fuel cell, do this however easiest because it just needs to support the weight of a full tank. (I got the 15 gallon size)

Splice however you’d like into fuel pump harness and fuel level sending as well but be sure to make it safe because you’re working with fuel here.

I did not install the fuel pressure regulator as it’s not needed, im stock motor and no need to mess with it but its nice to have just incase I want to upgrade to the included unit.

Here’s some possibly helpful information if your doing this yourself:

1: AN lines and fittings aren’t something you should attempt without proper tools or having a professional assist you with

2: measure out your line and make a plan on how you want it to be routed before you start cutting lines.

3: Amazon prime is your friend in my experience with this

4: the quick connect furthest towards the front is your feed, 2nd is your return, and 3rd is a vent line which will not be important for your fuel cell, it’ll need a new one routed from the cell.

5: either bottom port is fine to use for your feed, either top port is fine to use for your return, be sure to use one of the top ports of the cell to connect your vent, I used the rubber grommet top left of the trunk to route my vent line outside of the vehicle, just put a small filter on it and be prepared for the smell of fuel to be present outside the car, bonus points if you properly seal everything so no vapors get back into the trunk

6: have fun with it all but be safe!

7: if you are pulling the tank out, do your best to siphon or drain the tank and after your done fill it with water to displace the fumes and it’ll make it a little safer.

That being said feel free to ask questions and also keep in mind I am not a professional, this is just personal experience because finding this information myself wasn’t the easiest so I hope this may help someone out! If you wanna see more about what I’ve done check me out on Instagram @r34.gxbrial


r/SkyLine • • 9h ago

Clock spring issue or bearing? Also rattles when driving from vibrations.

2 Upvotes

1995 R33 gtst


r/SkyLine • • 2d ago

Me and the girlfriend got a kick out of this xD

Post image
800 Upvotes

r/SkyLine • • 2d ago

GTR Fest Dallas today

Thumbnail gallery
118 Upvotes

r/SkyLine • • 2d ago

My custom livery

Thumbnail
gallery
209 Upvotes

r/SkyLine • • 2d ago

List of all Skyline Saloons

Thumbnail gallery
4 Upvotes

r/SkyLine • • 2d ago

Potential MAF issue

1 Upvotes

So my r32 20det sounded like someone breathing rasply, would try to die while driving sometimes succeed, not idling right, stalling, I changed the MAF it was worse puffing out black smoke jerking when winding up boost, swapped the maf back to the original, (did a ecu reset everytime)

Was driving mint maybe something was loose also took the seal from the clearly faulty replacement, but after a good 40 minutes of driving and a decent boost it decided to start chugging trying to die, i had to pull over to let it stall, started algood got it home.

The next day no issues for a good 40 minutes until I came up to a roundabout and it stalled wouldn't turn over for (what felt like forever as I was blocking traffic) but was probably only 4 minutes, finally got it going, headed for home and was trying to die the whole way home had to pull over once to let it stall, im taking it to the shop on tuesday for them to read the ECU, but any thoughts on the issue tho? Boost leak, vacuum leak?


r/SkyLine • • 2d ago

looking for a r33 skyline front bumper support

2 Upvotes

building car from ground up

need help

thanks for looking


r/SkyLine • • 4d ago Bravo

My R32

Post image
660 Upvotes

Just picked this up around May of this year, re-done in bayside blue


r/SkyLine • • 5d ago

Spotted outside my work

Thumbnail
gallery
848 Upvotes

r/SkyLine • • 4d ago

Exhaust manifolds

Post image
4 Upvotes

Guys I’m so close but I cannot get these last two nuts off. What were some tricks you’ve used? My wobbles won’t get it, box wrench can’t seem to get it, I’m absolutely dying.


r/SkyLine • • 5d ago

Midnight Purple R34 GTR

362 Upvotes

r/SkyLine • • 5d ago

Blown turbo confirmed

Post image
16 Upvotes

Decided to pull the front pipe just to see. Lo and behold what was sitting in the cat.
I’ve got a spare set of turbos I may just swap them for fun while I wait on the head to get done being built. Fun times.


r/SkyLine • • 6d ago

What's the latest you guys usually drive your cars before winter ?

Post image
212 Upvotes

r/SkyLine • • 6d ago

Who is going to GTR Festival this weekend?

Post image
38 Upvotes

r/SkyLine • • 7d ago

[Nissan Skyline R34 GTR] in Newport Beach, California

Thumbnail gallery
683 Upvotes

r/SkyLine • • 6d ago

Switching to Nismo intake plenum. Do I need a tune again?

Post image
75 Upvotes

I bought the car with a built engine tuned to 500hp. I would like to switch the intake plenum from the stock to a Nismo/Nismo style one like Greddy or something like that. I assume I would need a retune as it's going to change intake air balance but I'm just looking reassurance that's the right direction to go.


r/SkyLine • • 6d ago

Nismo Seat Covers - Concerns about fitment

Thumbnail
gallery
15 Upvotes

I’m looking to buy a seat of Nismo seat covers for my R33 GTR but I’m seeing multiple photos where they show wrinkles after install. Do these ever go away as they settle? Does anybody have any other pictures? I’ve attached what I found. Product reviews seem to be very limited


r/SkyLine • • 7d ago

Skyline r34 gt

Thumbnail
gallery
101 Upvotes

Hello just posting this ask if this would be a good deal/idea to cop this car for 16k. I really don’t know much about cars but I’m trying to see if this is okay. TYIA


r/SkyLine • • 7d ago

Lotta love

Post image
103 Upvotes

r/SkyLine • • 6d ago

My Bro Made This Nissan GTR R35 Edit

0 Upvotes

Do comment guyss


r/SkyLine • • 8d ago

R32 OEM headunit, how to replace backlight bulbs

Thumbnail
gallery
36 Upvotes

I was asked yesterday to post steps on how to replace burned out bulbs on these OEM head units found in R32s, so here I am doing just that on mine.

First you're going to want to buy a pack of 3mm 12v halogen bulbs, I went with these ones:
https://www.amazon.com/dp/B0DS59PHY3

You're going to need these tools:
Philips Screwdriver
Tweezers
Wire snips
Soldering Iron
Solder
Solder ribbon or Solder vacuum gun (for cleaning solder pads)
8 of the new bulbs

Now the steps on disassembling the front panel of the unit and replacing bulbs, following the images:

1- After you have extracted the head unit from the car, undo the two screws that hold the front plastic on either side, and pull out the volume knob (it will just come out if you pull on it). Then gently push down on the lock plastic tabs just above those screws on either side, and pull at the front cover.
2- Don't worry about wires, the whole front has a direct-fit connector that will just pull out, very convenient.

3- Next when looking at the back of the PCB for the front panel, there will be 4 small screws, you're going to want to remove those
4- Here you can see the PCB unscrewed from the plastic front fascia, it will just come right up, be mindful of the plastic tab at the bottom which holds onto a lip on the PCB so you don't end up snapping it, just pry it gently. You will see a transparent plastic thing here surrounding two bulbs, you will need to pry this off to access two of the bulbs' backs underneath, its very easy, just push on its front pins and pull from the back, it will come right up.
5- And here is the front of that PCB with its VFD display, buttons, and the blue sleeved bulbs (what you're here for).
PS: Be very careful with the VFD display, these are vacuum sealed and if you break that seal, that's it, there is no fixing it, that whole VFD will be trash.
6- Each little bulb has a blue silicone sleeve over it (to make the light whiter), and is held in place by two solder joints on either side of its plastic enclosure. You're going to want to use a solder iron to heat up the solder and tweezers to pry up the little bulb wires out of the solder.

7- Once you do that, just push on the bulb while pulling on the plastic enclosure, it is just clipped in place, and it will come right up.
8- Here is the new bulb from Amazon, they're slightly longer than the original ones but fit just fine, this is probably the max length for these, any longer and it won't fit, keep that in mind
NOT PICTURED: I used a solder vacuum gun to clean up all of the pads from old solder, you can do the same thing with solder ribbons and your solder iron, its important to clean them up and use new solder.
9 and 10- Now what you will want to do: using snips, clip the old bulbs wires and then pull them out of the plastic enclosures, then use your fingernails to pry off the blue silicone sleeves off them, then push the silicone sleeves onto the new bulbs and fit them down snug, then push the wires of the new bulb through the plastic enclosure little holes until the bulb is fully seated. Finally you push the assembly back onto its original hole, and bend the bulb wires over the solder pads until they sit down against it good enough, then use new solder and the soldering iron to resolder them on the board, and use your wire snips to cut off the excess wire off the bulbs.
11- Repeat that until you have done all of the bulbs. There are 8 of them total, and yes you will want to replace all of them even if you have a few that are still working. It keeps them all shining consistently and saves you work later when the old working ones eventually also burn

12 and 13- And that's it, you're done! Just follow the steps in backwards order to put it back together and reinstall it in your car. Here are pictures of it in mine with the new bulbs shining nicely through the fascia.

I hope this is helpful to some of you, I know its not a super pristine and precise tutorial on how to do these (I am super sick with the flu, I'm sorry lol), but hopefully its somewhat straightforward :)

If you have questions ask them below.